/*
* PSA RSA layer on top of Mbed TLS crypto
*/
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*/
#ifndef PSA_CRYPTO_RSA_H
#define PSA_CRYPTO_RSA_H
#include <psa/crypto.h>
#include <mbedtls/rsa.h>
/** Load the contents of a key buffer into an internal RSA representation
*
* \param[in] type The type of key contained in \p data.
* \param[in] data The buffer from which to load the representation.
* \param[in] data_length The size in bytes of \p data.
* \param[out] p_rsa Returns a pointer to an RSA context on success.
* The caller is responsible for freeing both the
* contents of the context and the context itself
* when done.
*/
psa_status_t mbedtls_psa_rsa_load_representation(psa_key_type_t type,
const uint8_t *data,
size_t data_length,
mbedtls_rsa_context **p_rsa);
/** Import an RSA key in binary format.
*
* \note The signature of this function is that of a PSA driver
* import_key entry point. This function behaves as an import_key
* entry point as defined in the PSA driver interface specification for
* transparent drivers.
*
* \param[in] attributes The attributes for the key to import.
* \param[in] data The buffer containing the key data in import
* format.
* \param[in] data_length Size of the \p data buffer in bytes.
* \param[out] key_buffer The buffer containing the key data in output
* format.
* \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes. This
* size is greater or equal to \p data_length.
* \param[out] key_buffer_length The length of the data written in \p
* key_buffer in bytes.
* \param[out] bits The key size in number of bits.
*
* \retval #PSA_SUCCESS The RSA key was imported successfully.
* \retval #PSA_ERROR_INVALID_ARGUMENT
* The key data is not correctly formatted.
* \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
*/
psa_status_t mbedtls_psa_rsa_import_key(
const psa_key_attributes_t *attributes,
const uint8_t *data, size_t data_length,
uint8_t *key_buffer, size_t key_buffer_size,
size_t *key_buffer_length, size_t *bits);
/** Export an RSA key to export representation
*
* \param[in] type The type of key (public/private) to export
* \param[in] rsa The internal RSA representation from which to export
* \param[out] data The buffer to export to
* \param[in] data_size The length of the buffer to export to
* \param[out] data_length The amount of bytes written to \p data
*/
psa_status_t mbedtls_psa_rsa_export_key(psa_key_type_t type,
mbedtls_rsa_context *rsa,
uint8_t *data,
size_t data_size,
size_t *data_length);
/** Export a public RSA key or the public part of an RSA key pair in binary
* format.
*
* \note The signature of this function is that of a PSA driver
* export_public_key entry point. This function behaves as an
* export_public_key entry point as defined in the PSA driver interface
* specification.
*
* \param[in] attributes The attributes for the key to export.
* \param[in] key_buffer Material or context of the key to export.
* \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes.
* \param[out] data Buffer where the key data is to be written.
* \param[in] data_size Size of the \p data buffer in bytes.
* \param[out] data_length On success, the number of bytes written in
* \p data.
*
* \retval #PSA_SUCCESS The RSA public key was exported successfully.
* \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
* \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
* \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
* \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
*/
psa_status_t mbedtls_psa_rsa_export_public_key(
const psa_key_attributes_t *attributes,
const uint8_t *key_buffer, size_t key_buffer_size,
uint8_t *data, size_t data_size, size_t *data_length);
/**
* \brief Generate an RSA key.
*
* \param[in] attributes The attributes for the RSA key to generate.
* \param[in] custom_data The public exponent to use.
* This can be a null pointer if
* \c params_data_length is 0.
* \param custom_data_length Length of \p custom_data in bytes.
* This can be 0, in which case the
* public exponent will be 65537.
* \param[out] key_buffer Buffer where the key data is to be written.
* \param[in] key_buffer_size Size of \p key_buffer in bytes.
* \param[out] key_buffer_length On success, the number of bytes written in
* \p key_buffer.
*
* \retval #PSA_SUCCESS
* The key was successfully generated.
* \retval #PSA_ERROR_NOT_SUPPORTED
* Key length or type not supported.
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of \p key_buffer is too small.
*/
psa_status_t mbedtls_psa_rsa_generate_key(
const psa_key_attributes_t *attributes,
const uint8_t *custom_data, size_t custom_data_length,
uint8_t *key_buffer, size_t key_buffer_size, size_t *key_buffer_length);
/** Sign an already-calculated hash with an RSA private key.
*
* \note The signature of this function is that of a PSA driver
* sign_hash entry point. This function behaves as a sign_hash
* entry point as defined in the PSA driver interface specification for
* transparent drivers.
*
* \param[in] attributes The attributes of the RSA key to use for the
* operation.
* \param[in] key_buffer The buffer containing the RSA key context.
* format.
* \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes.
* \param[in] alg A signature algorithm that is compatible with
* an RSA key.
* \param[in] hash The hash or message to sign.
* \param[in] hash_length Size of the \p hash buffer in bytes.
* \param[out] signature Buffer where the signature is to be written.
* \param[in] signature_size Size of the \p signature buffer in bytes.
* \param[out] signature_length On success, the number of bytes
* that make up the returned signature value.
*
* \retval #PSA_SUCCESS \emptydescription
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p signature buffer is too small. You can
* determine a sufficient buffer size by calling
* #PSA_SIGN_OUTPUT_SIZE(\c PSA_KEY_TYPE_RSA_KEY_PAIR, \c key_bits,
* \p alg) where \c key_bits is the bit-size of the RSA key.
* \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
* \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
*/
psa_status_t mbedtls_psa_rsa_sign_hash(
const psa_key_attributes_t *attributes,
const uint8_t *key_buffer, size_t key_buffer_size,
psa_algorithm_t alg, const uint8_t *hash, size_t hash_length,
uint8_t *signature, size_t signature_size, size_t *signature_length);
/**
* \brief Verify the signature a hash or short message using a public RSA key.
*
* \note The signature of this function is that of a PSA driver
* verify_hash entry point. This function behaves as a verify_hash
* entry point as defined in the PSA driver interface specification for
* transparent drivers.
*
* \param[in] attributes The attributes of the RSA key to use for the
* operation.
* \param[in] key_buffer The buffer containing the RSA key context.
* format.
* \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes.
* \param[in] alg A signature algorithm that is compatible with
* an RSA key.
* \param[in] hash The hash or message whose signature is to be
* verified.
* \param[in] hash_length Size of the \p hash buffer in bytes.
* \param[in] signature Buffer containing the signature to verify.
* \param[in] signature_length Size of the \p signature buffer in bytes.
*
* \retval #PSA_SUCCESS
* The signature is valid.
* \retval #PSA_ERROR_INVALID_SIGNATURE
* The calculation was performed successfully, but the passed
* signature is not a valid signature.
* \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
* \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
*/
psa_status_t mbedtls_psa_rsa_verify_hash(
const psa_key_attributes_t *attributes,
const uint8_t *key_buffer, size_t key_buffer_size,
psa_algorithm_t alg, const uint8_t *hash, size_t hash_length,
const uint8_t *signature, size_t signature_length);
/**
* \brief Encrypt a short message with a public key.
*
* \param attributes The attributes for the key to import.
* \param key_buffer Buffer where the key data is to be written.
* \param key_buffer_size Size of the \p key_buffer buffer in bytes.
* \param input_length Size of the \p input buffer in bytes.
* \param[in] salt A salt or label, if supported by the
* encryption algorithm.
* If the algorithm does not support a
* salt, pass \c NULL.
* If the algorithm supports an optional
* salt and you do not want to pass a salt,
* pass \c NULL.
*
* - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
* supported.
* \param salt_length Size of the \p salt buffer in bytes.
* If \p salt is \c NULL, pass 0.
* \param[out] output Buffer where the encrypted message is to
* be written.
* \param output_size Size of the \p output buffer in bytes.
* \param[out] output_length On success, the number of bytes
* that make up the returned output.
*
* \retval #PSA_SUCCESS \emptydescription
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p output buffer is too small. You can
* determine a sufficient buffer size by calling
* #PSA_ASYMMETRIC_ENCRYPT_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
* where \c key_type and \c key_bits are the type and bit-size
* respectively of \p key.
* \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
* \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
* \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
* \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t mbedtls_psa_asymmetric_encrypt(const psa_key_attributes_t *attributes,
const uint8_t *key_buffer,
size_t key_buffer_size,
psa_algorithm_t alg,
const uint8_t *input,
size_t input_length,
const uint8_t *salt,
size_t salt_length,
uint8_t *output,
size_t output_size,
size_t *output_length);
/**
* \brief Decrypt a short message with a private key.
*
* \param attributes The attributes for the key to import.
* \param key_buffer Buffer where the key data is to be written.
* \param key_buffer_size Size of the \p key_buffer buffer in bytes.
* \param[in] input The message to decrypt.
* \param input_length Size of the \p input buffer in bytes.
* \param[in] salt A salt or label, if supported by the
* encryption algorithm.
* If the algorithm does not support a
* salt, pass \c NULL.
* If the algorithm supports an optional
* salt and you do not want to pass a salt,
* pass \c NULL.
*
* - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
* supported.
* \param salt_length Size of the \p salt buffer in bytes.
* If \p salt is \c NULL, pass 0.
* \param[out] output Buffer where the decrypted message is to
* be written.
* \param output_size Size of the \c output buffer in bytes.
* \param[out] output_length On success, the number of bytes
* that make up the returned output.
*
* \retval #PSA_SUCCESS \emptydescription
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p output buffer is too small. You can
* determine a sufficient buffer size by calling
* #PSA_ASYMMETRIC_DECRYPT_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
* where \c key_type and \c key_bits are the type and bit-size
* respectively of \p key.
* \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
* \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
* \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
* \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
* \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
* \retval #PSA_ERROR_INVALID_PADDING \emptydescription
* \retval #PSA_ERROR_BAD_STATE
* The library has not been previously initialized by psa_crypto_init().
* It is implementation-dependent whether a failure to initialize
* results in this error code.
*/
psa_status_t mbedtls_psa_asymmetric_decrypt(const psa_key_attributes_t *attributes,
const uint8_t *key_buffer,
size_t key_buffer_size,
psa_algorithm_t alg,
const uint8_t *input,
size_t input_length,
const uint8_t *salt,
size_t salt_length,
uint8_t *output,
size_t output_size,
size_t *output_length);
#endif /* PSA_CRYPTO_RSA_H */
Codebase Browser
godot