// SPDX-License-Identifier: GPL-2.0 /* Copyright(c) 2013 - 2019 Intel Corporation. */ #include <linux/bitfield.h> #include "fm10k_pf.h" #include "fm10k_vf.h" /** * fm10k_reset_hw_pf - PF hardware reset * @hw: pointer to hardware structure * * This function should return the hardware to a state similar to the * one it is in after being powered on. **/ static s32 fm10k_reset_hw_pf(struct fm10k_hw *hw) { … } /** * fm10k_is_ari_hierarchy_pf - Indicate ARI hierarchy support * @hw: pointer to hardware structure * * Looks at the ARI hierarchy bit to determine whether ARI is supported or not. **/ static bool fm10k_is_ari_hierarchy_pf(struct fm10k_hw *hw) { … } /** * fm10k_init_hw_pf - PF hardware initialization * @hw: pointer to hardware structure * **/ static s32 fm10k_init_hw_pf(struct fm10k_hw *hw) { … } /** * fm10k_update_vlan_pf - Update status of VLAN ID in VLAN filter table * @hw: pointer to hardware structure * @vid: VLAN ID to add to table * @vsi: Index indicating VF ID or PF ID in table * @set: Indicates if this is a set or clear operation * * This function adds or removes the corresponding VLAN ID from the VLAN * filter table for the corresponding function. In addition to the * standard set/clear that supports one bit a multi-bit write is * supported to set 64 bits at a time. **/ static s32 fm10k_update_vlan_pf(struct fm10k_hw *hw, u32 vid, u8 vsi, bool set) { … } /** * fm10k_read_mac_addr_pf - Read device MAC address * @hw: pointer to the HW structure * * Reads the device MAC address from the SM_AREA and stores the value. **/ static s32 fm10k_read_mac_addr_pf(struct fm10k_hw *hw) { … } /** * fm10k_glort_valid_pf - Validate that the provided glort is valid * @hw: pointer to the HW structure * @glort: base glort to be validated * * This function will return an error if the provided glort is invalid **/ bool fm10k_glort_valid_pf(struct fm10k_hw *hw, u16 glort) { … } /** * fm10k_update_xc_addr_pf - Update device addresses * @hw: pointer to the HW structure * @glort: base resource tag for this request * @mac: MAC address to add/remove from table * @vid: VLAN ID to add/remove from table * @add: Indicates if this is an add or remove operation * @flags: flags field to indicate add and secure * * This function generates a message to the Switch API requesting * that the given logical port add/remove the given L2 MAC/VLAN address. **/ static s32 fm10k_update_xc_addr_pf(struct fm10k_hw *hw, u16 glort, const u8 *mac, u16 vid, bool add, u8 flags) { … } /** * fm10k_update_uc_addr_pf - Update device unicast addresses * @hw: pointer to the HW structure * @glort: base resource tag for this request * @mac: MAC address to add/remove from table * @vid: VLAN ID to add/remove from table * @add: Indicates if this is an add or remove operation * @flags: flags field to indicate add and secure * * This function is used to add or remove unicast addresses for * the PF. **/ static s32 fm10k_update_uc_addr_pf(struct fm10k_hw *hw, u16 glort, const u8 *mac, u16 vid, bool add, u8 flags) { … } /** * fm10k_update_mc_addr_pf - Update device multicast addresses * @hw: pointer to the HW structure * @glort: base resource tag for this request * @mac: MAC address to add/remove from table * @vid: VLAN ID to add/remove from table * @add: Indicates if this is an add or remove operation * * This function is used to add or remove multicast MAC addresses for * the PF. **/ static s32 fm10k_update_mc_addr_pf(struct fm10k_hw *hw, u16 glort, const u8 *mac, u16 vid, bool add) { … } /** * fm10k_update_xcast_mode_pf - Request update of multicast mode * @hw: pointer to hardware structure * @glort: base resource tag for this request * @mode: integer value indicating mode being requested * * This function will attempt to request a higher mode for the port * so that it can enable either multicast, multicast promiscuous, or * promiscuous mode of operation. **/ static s32 fm10k_update_xcast_mode_pf(struct fm10k_hw *hw, u16 glort, u8 mode) { … } /** * fm10k_update_int_moderator_pf - Update interrupt moderator linked list * @hw: pointer to hardware structure * * This function walks through the MSI-X vector table to determine the * number of active interrupts and based on that information updates the * interrupt moderator linked list. **/ static void fm10k_update_int_moderator_pf(struct fm10k_hw *hw) { … } /** * fm10k_update_lport_state_pf - Notify the switch of a change in port state * @hw: pointer to the HW structure * @glort: base resource tag for this request * @count: number of logical ports being updated * @enable: boolean value indicating enable or disable * * This function is used to add/remove a logical port from the switch. **/ static s32 fm10k_update_lport_state_pf(struct fm10k_hw *hw, u16 glort, u16 count, bool enable) { … } /** * fm10k_configure_dglort_map_pf - Configures GLORT entry and queues * @hw: pointer to hardware structure * @dglort: pointer to dglort configuration structure * * Reads the configuration structure contained in dglort_cfg and uses * that information to then populate a DGLORTMAP/DEC entry and the queues * to which it has been assigned. **/ static s32 fm10k_configure_dglort_map_pf(struct fm10k_hw *hw, struct fm10k_dglort_cfg *dglort) { … } u16 fm10k_queues_per_pool(struct fm10k_hw *hw) { … } u16 fm10k_vf_queue_index(struct fm10k_hw *hw, u16 vf_idx) { … } static u16 fm10k_vectors_per_pool(struct fm10k_hw *hw) { … } static u16 fm10k_vf_vector_index(struct fm10k_hw *hw, u16 vf_idx) { … } /** * fm10k_iov_assign_resources_pf - Assign pool resources for virtualization * @hw: pointer to the HW structure * @num_vfs: number of VFs to be allocated * @num_pools: number of virtualization pools to be allocated * * Allocates queues and traffic classes to virtualization entities to prepare * the PF for SR-IOV and VMDq **/ static s32 fm10k_iov_assign_resources_pf(struct fm10k_hw *hw, u16 num_vfs, u16 num_pools) { … } /** * fm10k_iov_configure_tc_pf - Configure the shaping group for VF * @hw: pointer to the HW structure * @vf_idx: index of VF receiving GLORT * @rate: Rate indicated in Mb/s * * Configured the TC for a given VF to allow only up to a given number * of Mb/s of outgoing Tx throughput. **/ static s32 fm10k_iov_configure_tc_pf(struct fm10k_hw *hw, u16 vf_idx, int rate) { … } /** * fm10k_iov_assign_int_moderator_pf - Add VF interrupts to moderator list * @hw: pointer to the HW structure * @vf_idx: index of VF receiving GLORT * * Update the interrupt moderator linked list to include any MSI-X * interrupts which the VF has enabled in the MSI-X vector table. **/ static s32 fm10k_iov_assign_int_moderator_pf(struct fm10k_hw *hw, u16 vf_idx) { … } /** * fm10k_iov_assign_default_mac_vlan_pf - Assign a MAC and VLAN to VF * @hw: pointer to the HW structure * @vf_info: pointer to VF information structure * * Assign a MAC address and default VLAN to a VF and notify it of the update **/ static s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw, struct fm10k_vf_info *vf_info) { … } /** * fm10k_iov_reset_resources_pf - Reassign queues and interrupts to a VF * @hw: pointer to the HW structure * @vf_info: pointer to VF information structure * * Reassign the interrupts and queues to a VF following an FLR **/ static s32 fm10k_iov_reset_resources_pf(struct fm10k_hw *hw, struct fm10k_vf_info *vf_info) { … } /** * fm10k_iov_set_lport_pf - Assign and enable a logical port for a given VF * @hw: pointer to hardware structure * @vf_info: pointer to VF information structure * @lport_idx: Logical port offset from the hardware glort * @flags: Set of capability flags to extend port beyond basic functionality * * This function allows enabling a VF port by assigning it a GLORT and * setting the flags so that it can enable an Rx mode. **/ static s32 fm10k_iov_set_lport_pf(struct fm10k_hw *hw, struct fm10k_vf_info *vf_info, u16 lport_idx, u8 flags) { … } /** * fm10k_iov_reset_lport_pf - Disable a logical port for a given VF * @hw: pointer to hardware structure * @vf_info: pointer to VF information structure * * This function disables a VF port by stripping it of a GLORT and * setting the flags so that it cannot enable any Rx mode. **/ static void fm10k_iov_reset_lport_pf(struct fm10k_hw *hw, struct fm10k_vf_info *vf_info) { … } /** * fm10k_iov_update_stats_pf - Updates hardware related statistics for VFs * @hw: pointer to hardware structure * @q: stats for all queues of a VF * @vf_idx: index of VF * * This function collects queue stats for VFs. **/ static void fm10k_iov_update_stats_pf(struct fm10k_hw *hw, struct fm10k_hw_stats_q *q, u16 vf_idx) { … } /** * fm10k_iov_msg_msix_pf - Message handler for MSI-X request from VF * @hw: Pointer to hardware structure * @results: Pointer array to message, results[0] is pointer to message * @mbx: Pointer to mailbox information structure * * This function is a default handler for MSI-X requests from the VF. The * assumption is that in this case it is acceptable to just directly * hand off the message from the VF to the underlying shared code. **/ s32 fm10k_iov_msg_msix_pf(struct fm10k_hw *hw, u32 __always_unused **results, struct fm10k_mbx_info *mbx) { … } /** * fm10k_iov_select_vid - Select correct default VLAN ID * @vf_info: pointer to VF information structure * @vid: VLAN ID to correct * * Will report an error if the VLAN ID is out of range. For VID = 0, it will * return either the pf_vid or sw_vid depending on which one is set. */ s32 fm10k_iov_select_vid(struct fm10k_vf_info *vf_info, u16 vid) { … } /** * fm10k_iov_msg_mac_vlan_pf - Message handler for MAC/VLAN request from VF * @hw: Pointer to hardware structure * @results: Pointer array to message, results[0] is pointer to message * @mbx: Pointer to mailbox information structure * * This function is a default handler for MAC/VLAN requests from the VF. * The assumption is that in this case it is acceptable to just directly * hand off the message from the VF to the underlying shared code. **/ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results, struct fm10k_mbx_info *mbx) { … } /** * fm10k_iov_supported_xcast_mode_pf - Determine best match for xcast mode * @vf_info: VF info structure containing capability flags * @mode: Requested xcast mode * * This function outputs the mode that most closely matches the requested * mode. If not modes match it will request we disable the port **/ static u8 fm10k_iov_supported_xcast_mode_pf(struct fm10k_vf_info *vf_info, u8 mode) { … } /** * fm10k_iov_msg_lport_state_pf - Message handler for port state requests * @hw: Pointer to hardware structure * @results: Pointer array to message, results[0] is pointer to message * @mbx: Pointer to mailbox information structure * * This function is a default handler for port state requests. The port * state requests for now are basic and consist of enabling or disabling * the port. **/ s32 fm10k_iov_msg_lport_state_pf(struct fm10k_hw *hw, u32 **results, struct fm10k_mbx_info *mbx) { … } /** * fm10k_update_hw_stats_pf - Updates hardware related statistics of PF * @hw: pointer to hardware structure * @stats: pointer to the stats structure to update * * This function collects and aggregates global and per queue hardware * statistics. **/ static void fm10k_update_hw_stats_pf(struct fm10k_hw *hw, struct fm10k_hw_stats *stats) { … } /** * fm10k_rebind_hw_stats_pf - Resets base for hardware statistics of PF * @hw: pointer to hardware structure * @stats: pointer to the stats structure to update * * This function resets the base for global and per queue hardware * statistics. **/ static void fm10k_rebind_hw_stats_pf(struct fm10k_hw *hw, struct fm10k_hw_stats *stats) { … } /** * fm10k_set_dma_mask_pf - Configures PhyAddrSpace to limit DMA to system * @hw: pointer to hardware structure * @dma_mask: 64 bit DMA mask required for platform * * This function sets the PHYADDR.PhyAddrSpace bits for the endpoint in order * to limit the access to memory beyond what is physically in the system. **/ static void fm10k_set_dma_mask_pf(struct fm10k_hw *hw, u64 dma_mask) { … } /** * fm10k_get_fault_pf - Record a fault in one of the interface units * @hw: pointer to hardware structure * @type: pointer to fault type register offset * @fault: pointer to memory location to record the fault * * Record the fault register contents to the fault data structure and * clear the entry from the register. * * Returns ERR_PARAM if invalid register is specified or no error is present. **/ static s32 fm10k_get_fault_pf(struct fm10k_hw *hw, int type, struct fm10k_fault *fault) { … } /** * fm10k_request_lport_map_pf - Request LPORT map from the switch API * @hw: pointer to hardware structure * **/ static s32 fm10k_request_lport_map_pf(struct fm10k_hw *hw) { … } /** * fm10k_get_host_state_pf - Returns the state of the switch and mailbox * @hw: pointer to hardware structure * @switch_ready: pointer to boolean value that will record switch state * * This function will check the DMA_CTRL2 register and mailbox in order * to determine if the switch is ready for the PF to begin requesting * addresses and mapping traffic to the local interface. **/ static s32 fm10k_get_host_state_pf(struct fm10k_hw *hw, bool *switch_ready) { … } /* This structure defines the attibutes to be parsed below */ const struct fm10k_tlv_attr fm10k_lport_map_msg_attr[] = …; /** * fm10k_msg_lport_map_pf - Message handler for lport_map message from SM * @hw: Pointer to hardware structure * @results: pointer array containing parsed data * @mbx: Pointer to mailbox information structure * * This handler configures the lport mapping based on the reply from the * switch API. **/ s32 fm10k_msg_lport_map_pf(struct fm10k_hw *hw, u32 **results, struct fm10k_mbx_info __always_unused *mbx) { … } const struct fm10k_tlv_attr fm10k_update_pvid_msg_attr[] = …; /** * fm10k_msg_update_pvid_pf - Message handler for port VLAN message from SM * @hw: Pointer to hardware structure * @results: pointer array containing parsed data * @mbx: Pointer to mailbox information structure * * This handler configures the default VLAN for the PF **/ static s32 fm10k_msg_update_pvid_pf(struct fm10k_hw *hw, u32 **results, struct fm10k_mbx_info __always_unused *mbx) { … } /** * fm10k_record_global_table_data - Move global table data to swapi table info * @from: pointer to source table data structure * @to: pointer to destination table info structure * * This function is will copy table_data to the table_info contained in * the hw struct. **/ static void fm10k_record_global_table_data(struct fm10k_global_table_data *from, struct fm10k_swapi_table_info *to) { … } const struct fm10k_tlv_attr fm10k_err_msg_attr[] = …; /** * fm10k_msg_err_pf - Message handler for error reply * @hw: Pointer to hardware structure * @results: pointer array containing parsed data * @mbx: Pointer to mailbox information structure * * This handler will capture the data for any error replies to previous * messages that the PF has sent. **/ s32 fm10k_msg_err_pf(struct fm10k_hw *hw, u32 **results, struct fm10k_mbx_info __always_unused *mbx) { … } static const struct fm10k_msg_data fm10k_msg_data_pf[] = …; static const struct fm10k_mac_ops mac_ops_pf = …; static const struct fm10k_iov_ops iov_ops_pf = …; static s32 fm10k_get_invariants_pf(struct fm10k_hw *hw) { … } const struct fm10k_info fm10k_pf_info = …;
Codebase Browser
linux