# SPDX-License-Identifier: GPL-2.0-only
menuconfig ARCH_AT91
bool "AT91/Microchip SoCs"
depends on (CPU_LITTLE_ENDIAN && (ARCH_MULTI_V4T || ARCH_MULTI_V5)) || \
ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
select ARM_CPU_SUSPEND if PM && ARCH_MULTI_V7
select COMMON_CLK_AT91
select GPIOLIB
select PINCTRL
select SOC_BUS
if ARCH_AT91
config SOC_SAMV7
bool "SAM Cortex-M7 family" if ARM_SINGLE_ARMV7M
select COMMON_CLK_AT91
select PINCTRL_AT91
help
Select this if you are using an SoC from Microchip's SAME7, SAMS7 or SAMV7
families.
config SOC_SAMA5D2
bool "SAMA5D2 family"
depends on ARCH_MULTI_V7
select SOC_SAMA5
select CACHE_L2X0
select HAVE_AT91_UTMI
select HAVE_AT91_USB_CLK
select HAVE_AT91_H32MX
select HAVE_AT91_GENERATED_CLK
select HAVE_AT91_AUDIO_PLL
select HAVE_AT91_I2S_MUX_CLK
select PINCTRL_AT91PIO4
help
Select this if ou are using one of Microchip's SAMA5D2 family SoC.
config SOC_SAMA5D3
bool "SAMA5D3 family"
depends on ARCH_MULTI_V7
select SOC_SAMA5
select HAVE_AT91_UTMI
select HAVE_AT91_SMD
select HAVE_AT91_USB_CLK
select PINCTRL_AT91
help
Select this if you are using one of Microchip's SAMA5D3 family SoC.
This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
config SOC_SAMA5D4
bool "SAMA5D4 family"
depends on ARCH_MULTI_V7
select SOC_SAMA5
select CACHE_L2X0
select HAVE_AT91_UTMI
select HAVE_AT91_SMD
select HAVE_AT91_USB_CLK
select HAVE_AT91_H32MX
select PINCTRL_AT91
help
Select this if you are using one of Microchip's SAMA5D4 family SoC.
config SOC_SAMA7G5
bool "SAMA7G5 family"
depends on ARCH_MULTI_V7
select HAVE_AT91_GENERATED_CLK
select HAVE_AT91_SAM9X60_PLL
select HAVE_AT91_UTMI
select PM_OPP
select SOC_SAMA7
help
Select this if you are using one of Microchip's SAMA7G5 family SoC.
config SOC_LAN966
bool "ARMv7 based Microchip LAN966 SoC family"
depends on ARCH_MULTI_V7
select DW_APB_TIMER_OF
select ARM_GIC
select MEMORY
help
This enables support for ARMv7 based Microchip LAN966 SoC family.
config SOC_AT91RM9200
bool "AT91RM9200"
depends on ARCH_MULTI_V4T
select ATMEL_AIC_IRQ
select ATMEL_PM if PM
select ATMEL_ST
select CPU_ARM920T
select HAVE_AT91_USB_CLK
select PINCTRL_AT91
select SOC_SAM_V4_V5
select SRAM if PM
help
Select this if you are using Microchip's AT91RM9200 SoC.
config SOC_AT91SAM9
bool "AT91SAM9"
depends on ARCH_MULTI_V5
select ATMEL_AIC_IRQ
select ATMEL_PM if PM
select CPU_ARM926T
select HAVE_AT91_SMD
select HAVE_AT91_USB_CLK
select HAVE_AT91_UTMI
select HAVE_FB_ATMEL
select MEMORY
select PINCTRL_AT91
select SOC_SAM_V4_V5
select SRAM if PM
help
Select this if you are using one of those Microchip SoC:
AT91SAM9260
AT91SAM9261
AT91SAM9263
AT91SAM9G15
AT91SAM9G20
AT91SAM9G25
AT91SAM9G35
AT91SAM9G45
AT91SAM9G46
AT91SAM9M10
AT91SAM9M11
AT91SAM9N12
AT91SAM9RL
AT91SAM9X25
AT91SAM9X35
AT91SAM9XE
config SOC_SAM9X60
bool "SAM9X60"
depends on ARCH_MULTI_V5
select ATMEL_AIC5_IRQ
select ATMEL_PM if PM
select CPU_ARM926T
select HAVE_AT91_USB_CLK
select HAVE_AT91_GENERATED_CLK
select HAVE_AT91_SAM9X60_PLL
select MEMORY
select PINCTRL_AT91
select SOC_SAM_V4_V5
select SRAM if PM
help
Select this if you are using Microchip's SAM9X60 SoC
config SOC_SAM9X7
bool "SAM9X7"
depends on ARCH_MULTI_V5
select ATMEL_AIC5_IRQ
select ATMEL_PM if PM
select CPU_ARM926T
select HAVE_AT91_USB_CLK
select HAVE_AT91_GENERATED_CLK
select HAVE_AT91_SAM9X60_PLL
select MEMORY
select PINCTRL_AT91
select SOC_SAM_V4_V5
select SRAM if PM
help
Select this if you are using Microchip's SAM9X7 SoC
comment "Clocksource driver selection"
config ATMEL_CLOCKSOURCE_PIT
bool "Periodic Interval Timer (PIT) support"
depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5
default SOC_AT91SAM9 || SOC_SAMA5
select ATMEL_PIT
help
Select this to get a clocksource based on the Atmel Periodic Interval
Timer. It has a relatively low resolution and the TC Block clocksource
should be preferred.
config ATMEL_CLOCKSOURCE_TCB
bool "Timer Counter Blocks (TCB) support"
default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5
select ATMEL_TCB_CLKSRC
help
Select this to get a high precision clocksource based on a
TC block with a 5+ MHz base clock rate.
On platforms with 16-bit counters, two timer channels are combined
to make a single 32-bit timer.
It can also be used as a clock event device supporting oneshot mode.
config MICROCHIP_CLOCKSOURCE_PIT64B
bool "64-bit Periodic Interval Timer (PIT64B) support"
default SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA7
select MICROCHIP_PIT64B
help
Select this to get a high resolution clockevent (SAM9X60) or
clocksource and clockevent (SAMA7G5) based on Microchip 64-bit
Periodic Interval Timer.
config HAVE_AT91_UTMI
bool
config HAVE_AT91_USB_CLK
bool
config COMMON_CLK_AT91
bool
select MFD_SYSCON
config HAVE_AT91_SMD
bool
config HAVE_AT91_H32MX
bool
config HAVE_AT91_GENERATED_CLK
bool
config HAVE_AT91_AUDIO_PLL
bool
config HAVE_AT91_I2S_MUX_CLK
bool
config HAVE_AT91_SAM9X60_PLL
bool
config SOC_SAM_V4_V5
bool
config SOC_SAM_V7
bool
config SOC_SAMA5
bool
select ATMEL_AIC5_IRQ
select ATMEL_PM if PM
select MEMORY
select SOC_SAM_V7
select SRAM if PM
config ATMEL_PM
bool
config ATMEL_SECURE_PM
bool "Atmel Secure PM support"
depends on SOC_SAMA5D2 && ATMEL_PM
select ARM_PSCI
help
When running under a TEE, the suspend mode must be requested to be set
at TEE level. When enable, this option will use secure monitor calls
to set the suspend level. PSCI is then used to enter suspend.
config SOC_SAMA7
bool
select ARM_GIC
select ATMEL_PM if PM
select MEMORY
select SOC_SAM_V7
select SRAM if PM
endif
Codebase Browser
linux