/* * This module provides common API for accessing firmware configuration pages * * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c * Copyright (C) 2012-2014 LSI Corporation * Copyright (C) 2013-2014 Avago Technologies * (mailto: [email protected]) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * NO WARRANTY * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is * solely responsible for determining the appropriateness of using and * distributing the Program and assumes all risks associated with its * exercise of rights under this Agreement, including but not limited to * the risks and costs of program errors, damage to or loss of data, * programs or equipment, and unavailability or interruption of operations. * DISCLAIMER OF LIABILITY * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, * USA. */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/errno.h> #include <linux/blkdev.h> #include <linux/sched.h> #include <linux/workqueue.h> #include <linux/delay.h> #include <linux/pci.h> #include "mpt3sas_base.h" /* local definitions */ /* Timeout for config page request (in seconds) */ #define MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT … /* Common sgl flags for READING a config page. */ #define MPT3_CONFIG_COMMON_SGLFLAGS … /* Common sgl flags for WRITING a config page. */ #define MPT3_CONFIG_COMMON_WRITE_SGLFLAGS … /** * struct config_request - obtain dma memory via routine * @sz: size * @page: virt pointer * @page_dma: phys pointer * */ struct config_request { … }; /** * _config_display_some_debug - debug routine * @ioc: per adapter object * @smid: system request message index * @calling_function_name: string pass from calling function * @mpi_reply: reply message frame * Context: none. * * Function for displaying debug info helpful when debugging issues * in this module. */ static void _config_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid, char *calling_function_name, MPI2DefaultReply_t *mpi_reply) { … } /** * _config_alloc_config_dma_memory - obtain physical memory * @ioc: per adapter object * @mem: struct config_request * * A wrapper for obtaining dma-able memory for config page request. * * Return: 0 for success, non-zero for failure. */ static int _config_alloc_config_dma_memory(struct MPT3SAS_ADAPTER *ioc, struct config_request *mem) { … } /** * _config_free_config_dma_memory - wrapper to free the memory * @ioc: per adapter object * @mem: struct config_request * * A wrapper to free dma-able memory when using _config_alloc_config_dma_memory. * * Return: 0 for success, non-zero for failure. */ static void _config_free_config_dma_memory(struct MPT3SAS_ADAPTER *ioc, struct config_request *mem) { … } /** * mpt3sas_config_done - config page completion routine * @ioc: per adapter object * @smid: system request message index * @msix_index: MSIX table index supplied by the OS * @reply: reply message frame(lower 32bit addr) * Context: none. * * The callback handler when using _config_request. * * Return: 1 meaning mf should be freed from _base_interrupt * 0 means the mf is freed from this function. */ u8 mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) { … } /** * _config_request - main routine for sending config page requests * @ioc: per adapter object * @mpi_request: request message frame * @mpi_reply: reply mf payload returned from firmware * @timeout: timeout in seconds * @config_page: contents of the config page * @config_page_sz: size of config page * Context: sleep * * A generic API for config page requests to firmware. * * The ioc->config_cmds.status flag should be MPT3_CMD_NOT_USED before calling * this API. * * The callback index is set inside `ioc->config_cb_idx. * * Return: 0 for success, non-zero for failure. */ static int _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t *mpi_request, Mpi2ConfigReply_t *mpi_reply, int timeout, void *config_page, u16 config_page_sz) { … } /** * mpt3sas_config_get_manufacturing_pg0 - obtain manufacturing page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_manufacturing_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page) { … } /** * mpt3sas_config_get_manufacturing_pg1 - obtain manufacturing page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_manufacturing_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage1_t *config_page) { … } /** * mpt3sas_config_get_manufacturing_pg7 - obtain manufacturing page 7 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @sz: size of buffer passed in config_page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_manufacturing_pg7(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage7_t *config_page, u16 sz) { … } /** * mpt3sas_config_get_manufacturing_pg10 - obtain manufacturing page 10 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_manufacturing_pg10(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, struct Mpi2ManufacturingPage10_t *config_page) { … } /** * mpt3sas_config_get_manufacturing_pg11 - obtain manufacturing page 11 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, struct Mpi2ManufacturingPage11_t *config_page) { … } /** * mpt3sas_config_set_manufacturing_pg11 - set manufacturing page 11 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, struct Mpi2ManufacturingPage11_t *config_page) { … } /** * mpt3sas_config_get_bios_pg2 - obtain bios page 2 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_bios_pg2(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage2_t *config_page) { … } /** * mpt3sas_config_get_bios_pg3 - obtain bios page 3 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_bios_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage3_t *config_page) { … } /** * mpt3sas_config_set_bios_pg4 - write out bios page 4 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @sz_config_pg: sizeof the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_set_bios_pg4(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage4_t *config_page, int sz_config_pg) { … } /** * mpt3sas_config_get_bios_pg4 - read bios page 4 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @sz_config_pg: sizeof the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_bios_pg4(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage4_t *config_page, int sz_config_pg) { … } /** * mpt3sas_config_get_iounit_pg0 - obtain iounit page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_iounit_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage0_t *config_page) { … } /** * mpt3sas_config_get_iounit_pg1 - obtain iounit page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page) { … } /** * mpt3sas_config_set_iounit_pg1 - set iounit page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page) { … } /** * mpt3sas_config_get_iounit_pg3 - obtain iounit page 3 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @sz: size of buffer passed in config_page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_iounit_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz) { … } /** * mpt3sas_config_get_iounit_pg8 - obtain iounit page 8 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page) { … } /** * mpt3sas_config_get_ioc_pg8 - obtain ioc page 8 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_ioc_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page) { … } /** * mpt3sas_config_get_ioc_pg1 - obtain ioc page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_ioc_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage1_t *config_page) { … } /** * mpt3sas_config_set_ioc_pg1 - modify ioc page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_set_ioc_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage1_t *config_page) { … } /** * mpt3sas_config_get_sas_device_pg0 - obtain sas device page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: device handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_sas_device_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u32 handle) { … } /** * mpt3sas_config_get_sas_device_pg1 - obtain sas device page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: device handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_sas_device_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage1_t *config_page, u32 form, u32 handle) { … } /** * mpt3sas_config_get_pcie_device_pg0 - obtain pcie device page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: device handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_pcie_device_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage0_t *config_page, u32 form, u32 handle) { … } /** * mpt3sas_config_get_pcie_iounit_pg1 - obtain pcie iounit page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @sz: size of buffer passed in config_page * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mpt3sas_config_get_pcie_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeIOUnitPage1_t *config_page, u16 sz) { … } /** * mpt3sas_config_get_pcie_device_pg2 - obtain pcie device page 2 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: device handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_pcie_device_pg2(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage2_t *config_page, u32 form, u32 handle) { … } /** * mpt3sas_config_get_number_hba_phys - obtain number of phys on the host * @ioc: per adapter object * @num_phys: pointer returned with the number of phys * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_number_hba_phys(struct MPT3SAS_ADAPTER *ioc, u8 *num_phys) { … } /** * mpt3sas_config_get_sas_iounit_pg0 - obtain sas iounit page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @sz: size of buffer passed in config_page * Context: sleep. * * Calling function should call config_get_number_hba_phys prior to * this function, so enough memory is allocated for config_page. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, u16 sz) { … } /** * mpt3sas_config_get_sas_iounit_pg1 - obtain sas iounit page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @sz: size of buffer passed in config_page * Context: sleep. * * Calling function should call config_get_number_hba_phys prior to * this function, so enough memory is allocated for config_page. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz) { … } /** * mpt3sas_config_set_sas_iounit_pg1 - send sas iounit page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @sz: size of buffer passed in config_page * Context: sleep. * * Calling function should call config_get_number_hba_phys prior to * this function, so enough memory is allocated for config_page. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_set_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz) { … } /** * mpt3sas_config_get_expander_pg0 - obtain expander page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: expander handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_expander_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle) { … } /** * mpt3sas_config_get_expander_pg1 - obtain expander page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @phy_number: phy number * @handle: expander handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_expander_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number, u16 handle) { … } /** * mpt3sas_config_get_enclosure_pg0 - obtain enclosure page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: expander handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_enclosure_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle) { … } /** * mpt3sas_config_get_phy_pg0 - obtain phy page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @phy_number: phy number * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_phy_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number) { … } /** * mpt3sas_config_get_phy_pg1 - obtain phy page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @phy_number: phy number * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_phy_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number) { … } /** * mpt3sas_config_get_raid_volume_pg1 - obtain raid volume page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: volume handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_raid_volume_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, u32 handle) { … } /** * mpt3sas_config_get_number_pds - obtain number of phys disk assigned to volume * @ioc: per adapter object * @handle: volume handle * @num_pds: returns pds count * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_number_pds(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 *num_pds) { … } /** * mpt3sas_config_get_raid_volume_pg0 - obtain raid volume page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: volume handle * @sz: size of buffer passed in config_page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_raid_volume_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form, u32 handle, u16 sz) { … } /** * mpt3sas_config_get_phys_disk_pg0 - obtain phys disk page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_PHYSDISKNUM, PHYSDISKNUM, DEVHANDLE * @form_specific: specific to the form * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_phys_disk_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form, u32 form_specific) { … } /** * mpt3sas_config_get_driver_trigger_pg0 - obtain driver trigger page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mpt3sas_config_get_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage0_t *config_page) { … } /** * _config_set_driver_trigger_pg0 - write driver trigger page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Returns 0 for success, non-zero for failure. */ static int _config_set_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage0_t *config_page) { … } /** * mpt3sas_config_update_driver_trigger_pg0 - update driver trigger page 0 * @ioc: per adapter object * @trigger_flag: trigger type bit map * @set: set ot clear trigger values * Context: sleep. * * Returns 0 for success, non-zero for failure. */ static int mpt3sas_config_update_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc, u16 trigger_flag, bool set) { … } /** * mpt3sas_config_get_driver_trigger_pg1 - obtain driver trigger page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mpt3sas_config_get_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page) { … } /** * _config_set_driver_trigger_pg1 - write driver trigger page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Returns 0 for success, non-zero for failure. */ static int _config_set_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page) { … } /** * mpt3sas_config_update_driver_trigger_pg1 - update driver trigger page 1 * @ioc: per adapter object * @master_tg: Master trigger bit map * @set: set ot clear trigger values * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mpt3sas_config_update_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, struct SL_WH_MASTER_TRIGGER_T *master_tg, bool set) { … } /** * mpt3sas_config_get_driver_trigger_pg2 - obtain driver trigger page 2 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mpt3sas_config_get_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage2_t *config_page) { … } /** * _config_set_driver_trigger_pg2 - write driver trigger page 2 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Returns 0 for success, non-zero for failure. */ static int _config_set_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage2_t *config_page) { … } /** * mpt3sas_config_update_driver_trigger_pg2 - update driver trigger page 2 * @ioc: per adapter object * @event_tg: list of Event Triggers * @set: set ot clear trigger values * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mpt3sas_config_update_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc, struct SL_WH_EVENT_TRIGGERS_T *event_tg, bool set) { … } /** * mpt3sas_config_get_driver_trigger_pg3 - obtain driver trigger page 3 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mpt3sas_config_get_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage3_t *config_page) { … } /** * _config_set_driver_trigger_pg3 - write driver trigger page 3 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Returns 0 for success, non-zero for failure. */ static int _config_set_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage3_t *config_page) { … } /** * mpt3sas_config_update_driver_trigger_pg3 - update driver trigger page 3 * @ioc: per adapter object * @scsi_tg: scsi trigger list * @set: set ot clear trigger values * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mpt3sas_config_update_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc, struct SL_WH_SCSI_TRIGGERS_T *scsi_tg, bool set) { … } /** * mpt3sas_config_get_driver_trigger_pg4 - obtain driver trigger page 4 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mpt3sas_config_get_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage4_t *config_page) { … } /** * _config_set_driver_trigger_pg4 - write driver trigger page 4 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Returns 0 for success, non-zero for failure. */ static int _config_set_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage4_t *config_page) { … } /** * mpt3sas_config_update_driver_trigger_pg4 - update driver trigger page 4 * @ioc: per adapter object * @mpi_tg: mpi trigger list * @set: set ot clear trigger values * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mpt3sas_config_update_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc, struct SL_WH_MPI_TRIGGERS_T *mpi_tg, bool set) { … } /** * mpt3sas_config_get_volume_handle - returns volume handle for give hidden * raid components * @ioc: per adapter object * @pd_handle: phys disk handle * @volume_handle: volume handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_volume_handle(struct MPT3SAS_ADAPTER *ioc, u16 pd_handle, u16 *volume_handle) { … } /** * mpt3sas_config_get_volume_wwid - returns wwid given the volume handle * @ioc: per adapter object * @volume_handle: volume handle * @wwid: volume wwid * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc, u16 volume_handle, u64 *wwid) { … }
Codebase Browser
linux