/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2000-2008 LSI Corporation. * * * Name: mpi_cnfg.h * Title: MPI Config message, structures, and Pages * Creation Date: July 27, 2000 * * mpi_cnfg.h Version: 01.05.18 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. * 06-06-00 01.00.01 Update version number for 1.0 release. * 06-08-00 01.00.02 Added _PAGEVERSION definitions for all pages. * Added FcPhLowestVersion, FcPhHighestVersion, Reserved2 * fields to FC_DEVICE_0 page, updated the page version. * Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in * SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages * and updated the page versions. * Added _RESPONSE_ID_MASK definition to SCSI_PORT_1 * page and updated the page version. * Added Information field and _INFO_PARAMS_NEGOTIATED * definitionto SCSI_DEVICE_0 page. * 06-22-00 01.00.03 Removed batch controls from LAN_0 page and updated the * page version. * Added BucketsRemaining to LAN_1 page, redefined the * state values, and updated the page version. * Revised bus width definitions in SCSI_PORT_0, * SCSI_DEVICE_0 and SCSI_DEVICE_1 pages. * 06-30-00 01.00.04 Added MaxReplySize to LAN_1 page and updated the page * version. * Moved FC_DEVICE_0 PageAddress description to spec. * 07-27-00 01.00.05 Corrected the SubsystemVendorID and SubsystemID field * widths in IOC_0 page and updated the page version. * 11-02-00 01.01.01 Original release for post 1.0 work * Added Manufacturing pages, IO Unit Page 2, SCSI SPI * Port Page 2, FC Port Page 4, FC Port Page 5 * 11-15-00 01.01.02 Interim changes to match proposals * 12-04-00 01.01.03 Config page changes to match MPI rev 1.00.01. * 12-05-00 01.01.04 Modified config page actions. * 01-09-01 01.01.05 Added defines for page address formats. * Data size for Manufacturing pages 2 and 3 no longer * defined here. * Io Unit Page 2 size is fixed at 4 adapters and some * flags were changed. * SCSI Port Page 2 Device Settings modified. * New fields added to FC Port Page 0 and some flags * cleaned up. * Removed impedance flash from FC Port Page 1. * Added FC Port pages 6 and 7. * 01-25-01 01.01.06 Added MaxInitiators field to FcPortPage0. * 01-29-01 01.01.07 Changed some defines to make them 32 character unique. * Added some LinkType defines for FcPortPage0. * 02-20-01 01.01.08 Started using MPI_POINTER. * 02-27-01 01.01.09 Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with * MPI_CONFIG_PAGETYPE_RAID_VOLUME. * Added definitions and structures for IOC Page 2 and * RAID Volume Page 2. * 03-27-01 01.01.10 Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9. * CONFIG_PAGE_FC_PORT_3 now supports persistent by DID. * Added VendorId and ProductRevLevel fields to * RAIDVOL2_IM_PHYS_ID struct. * Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_ * defines to make them compatible to MPI version 1.0. * Added structure offset comments. * 04-09-01 01.01.11 Added some new defines for the PageAddress field and * removed some obsolete ones. * Added IO Unit Page 3. * Modified defines for Scsi Port Page 2. * Modified RAID Volume Pages. * 08-08-01 01.02.01 Original release for v1.2 work. * Added SepID and SepBus to RVP2 IMPhysicalDisk struct. * Added defines for the SEP bits in RVP2 VolumeSettings. * Modified the DeviceSettings field in RVP2 to use the * proper structure. * Added defines for SES, SAF-TE, and cross channel for * IOCPage2 CapabilitiesFlags. * Removed define for MPI_IOUNITPAGE2_FLAGS_RAID_DISABLE. * Removed define for * MPI_SCSIPORTPAGE2_PORT_FLAGS_PARITY_ENABLE. * Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT. * 08-29-01 01.02.02 Fixed value for MPI_MANUFACTPAGE_DEVID_53C1035. * Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY * and MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY. * Removed MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS, * MPI_SCSIDEVPAGE0_NP_PACING_TRANSFERS, and * MPI_SCSIDEVPAGE1_RP_PACING_TRANSFERS, and * MPI_SCSIDEVPAGE1_CONF_PPR_ALLOWED. * Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED * and MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED. * Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1. * Added rejected bits to SCSI Device Page 0 Information. * Increased size of ALPA array in FC Port Page 2 by one * and removed a one byte reserved field. * 09-28-01 01.02.03 Swapped NegWireSpeedLow and NegWireSpeedLow in * CONFIG_PAGE_LAN_1 to match preferred 64-bit ordering. * Added structures for Manufacturing Page 4, IO Unit * Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and * RAID PhysDisk Page 0. * 10-04-01 01.02.04 Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK. * Modified some of the new defines to make them 32 * character unique. * Modified how variable length pages (arrays) are defined. * Added generic defines for hot spare pools and RAID * volume types. * 11-01-01 01.02.05 Added define for MPI_IOUNITPAGE1_DISABLE_IR. * 03-14-02 01.02.06 Added PCISlotNum field to CONFIG_PAGE_IOC_1 along with * related define, and bumped the page version define. * 05-31-02 01.02.07 Added a Flags field to CONFIG_PAGE_IOC_2_RAID_VOL in a * reserved byte and added a define. * Added define for * MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE. * Added new config page: CONFIG_PAGE_IOC_5. * Added MaxAliases, MaxHardAliases, and NumCurrentAliases * fields to CONFIG_PAGE_FC_PORT_0. * Added AltConnector and NumRequestedAliases fields to * CONFIG_PAGE_FC_PORT_1. * Added new config page: CONFIG_PAGE_FC_PORT_10. * 07-12-02 01.02.08 Added more MPI_MANUFACTPAGE_DEVID_ defines. * Added additional MPI_SCSIDEVPAGE0_NP_ defines. * Added more MPI_SCSIDEVPAGE1_RP_ defines. * Added define for * MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE. * Added new config page: CONFIG_PAGE_SCSI_DEVICE_3. * Modified MPI_FCPORTPAGE5_FLAGS_ defines. * 09-16-02 01.02.09 Added MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define. * 11-15-02 01.02.10 Added ConnectedID defines for CONFIG_PAGE_SCSI_PORT_0. * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. * Added more Flags defines for CONFIG_PAGE_FC_DEVICE_0. * 04-01-03 01.02.11 Added RR_TOV field and additional Flags defines for * CONFIG_PAGE_FC_PORT_1. * Added define MPI_FCPORTPAGE5_FLAGS_DISABLE to disable * an alias. * Added more device id defines. * 06-26-03 01.02.12 Added MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID define. * Added TargetConfig and IDConfig fields to * CONFIG_PAGE_SCSI_PORT_1. * Added more PortFlags defines for CONFIG_PAGE_SCSI_PORT_2 * to control DV. * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. * In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field * with ADISCHardALPA. * Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define. * 01-16-04 01.02.13 Added InitiatorDeviceTimeout and InitiatorIoPendTimeout * fields and related defines to CONFIG_PAGE_FC_PORT_1. * Added define for * MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK. * Added new fields to the substructures of * CONFIG_PAGE_FC_PORT_10. * 04-29-04 01.02.14 Added define for IDP bit for CONFIG_PAGE_SCSI_PORT_0, * CONFIG_PAGE_SCSI_DEVICE_0, and * CONFIG_PAGE_SCSI_DEVICE_1. Also bumped Page Version for * these pages. * 05-11-04 01.03.01 Added structure for CONFIG_PAGE_INBAND_0. * 08-19-04 01.05.01 Modified MSG_CONFIG request to support extended config * pages. * Added a new structure for extended config page header. * Added new extended config pages types and structures for * SAS IO Unit, SAS Expander, SAS Device, and SAS PHY. * Replaced a reserved byte in CONFIG_PAGE_MANUFACTURING_4 * to add a Flags field. * Two new Manufacturing config pages (5 and 6). * Two new bits defined for IO Unit Page 1 Flags field. * Modified CONFIG_PAGE_IO_UNIT_2 to add three new fields * to specify the BIOS boot device. * Four new Flags bits defined for IO Unit Page 2. * Added IO Unit Page 4. * Added EEDP Flags settings to IOC Page 1. * Added new BIOS Page 1 config page. * 10-05-04 01.05.02 Added define for * MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE. * Added new Flags field to CONFIG_PAGE_MANUFACTURING_5 and * associated defines. * Added more defines for SAS IO Unit Page 0 * DiscoveryStatus field. * Added define for MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK * and MPI_SAS_IOUNIT0_DS_TABLE_LINK. * Added defines for Physical Mapping Modes to SAS IO Unit * Page 2. * Added define for * MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH. * 10-27-04 01.05.03 Added defines for new SAS PHY page addressing mode. * Added defines for MaxTargetSpinUp to BIOS Page 1. * Added 5 new ControlFlags defines for SAS IO Unit * Page 1. * Added MaxNumPhysicalMappedIDs field to SAS IO Unit * Page 2. * Added AccessStatus field to SAS Device Page 0 and added * new Flags bits for supported SATA features. * 12-07-04 01.05.04 Added config page structures for BIOS Page 2, RAID * Volume Page 1, and RAID Physical Disk Page 1. * Replaced IO Unit Page 1 BootTargetID,BootBus, and * BootAdapterNum with reserved field. * Added DataScrubRate and ResyncRate to RAID Volume * Page 0. * Added MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT * define. * 12-09-04 01.05.05 Added Target Mode Large CDB Enable to FC Port Page 1 * Flags field. * Added Auto Port Config flag define for SAS IOUNIT * Page 1 ControlFlags. * Added Disabled bad Phy define to Expander Page 1 * Discovery Info field. * Added SAS/SATA device support to SAS IOUnit Page 1 * ControlFlags. * Added Unsupported device to SAS Dev Page 0 Flags field * Added disable use SATA Hash Address for SAS IOUNIT * page 1 in ControlFields. * 01-15-05 01.05.06 Added defaults for data scrub rate and resync rate to * Manufacturing Page 4. * Added new defines for BIOS Page 1 IOCSettings field. * Added ExtDiskIdentifier field to RAID Physical Disk * Page 0. * Added new defines for SAS IO Unit Page 1 ControlFlags * and to SAS Device Page 0 Flags to control SATA devices. * Added defines and structures for the new Log Page 0, a * new type of configuration page. * 02-09-05 01.05.07 Added InactiveStatus field to RAID Volume Page 0. * Added WWID field to RAID Volume Page 1. * Added PhysicalPort field to SAS Expander pages 0 and 1. * 03-11-05 01.05.08 Removed the EEDP flags from IOC Page 1. * Added Enclosure/Slot boot device format to BIOS Page 2. * New status value for RAID Volume Page 0 VolumeStatus * (VolumeState subfield). * New value for RAID Physical Page 0 InactiveStatus. * Added Inactive Volume Member flag RAID Physical Disk * Page 0 PhysDiskStatus field. * New physical mapping mode in SAS IO Unit Page 2. * Added CONFIG_PAGE_SAS_ENCLOSURE_0. * Added Slot and Enclosure fields to SAS Device Page 0. * 06-24-05 01.05.09 Added EEDP defines to IOC Page 1. * Added more RAID type defines to IOC Page 2. * Added Port Enable Delay settings to BIOS Page 1. * Added Bad Block Table Full define to RAID Volume Page 0. * Added Previous State defines to RAID Physical Disk * Page 0. * Added Max Sata Targets define for DiscoveryStatus field * of SAS IO Unit Page 0. * Added Device Self Test to Control Flags of SAS IO Unit * Page 1. * Added Direct Attach Starting Slot Number define for SAS * IO Unit Page 2. * Added new fields in SAS Device Page 2 for enclosure * mapping. * Added OwnerDevHandle and Flags field to SAS PHY Page 0. * Added IOC GPIO Flags define to SAS Enclosure Page 0. * Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT. * 08-03-05 01.05.10 Removed ISDataScrubRate and ISResyncRate from * Manufacturing Page 4. * Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit. * Added NumDevsPerEnclosure field to SAS IO Unit page 2. * Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP * define. * Added EnclosureHandle field to SAS Expander page 0. * Removed redundant NumTableEntriesProg field from SAS * Expander Page 1. * 08-30-05 01.05.11 Added DeviceID for FC949E and changed the DeviceID for * SAS1078. * Added more defines for Manufacturing Page 4 Flags field. * Added more defines for IOCSettings and added * ExpanderSpinup field to Bios Page 1. * Added postpone SATA Init bit to SAS IO Unit Page 1 * ControlFlags. * Changed LogEntry format for Log Page 0. * 03-27-06 01.05.12 Added two new Flags defines for Manufacturing Page 4. * Added Manufacturing Page 7. * Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING. * Added IOC Page 6. * Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2. * Added MaxLBAHigh field to RAID Volume Page 0. * Added Nvdata version fields to SAS IO Unit Page 0. * Added AdditionalControlFlags, MaxTargetPortConnectTime, * ReportDeviceMissingDelay, and IODeviceMissingDelay * fields to SAS IO Unit Page 1. * 10-11-06 01.05.13 Added NumForceWWID field and ForceWWID array to * Manufacturing Page 5. * Added Manufacturing pages 8 through 10. * Added defines for supported metadata size bits in * CapabilitiesFlags field of IOC Page 6. * Added defines for metadata size bits in VolumeSettings * field of RAID Volume Page 0. * Added SATA Link Reset settings, Enable SATA Asynchronous * Notification bit, and HideNonZeroAttachedPhyIdentifiers * bit to AdditionalControlFlags field of SAS IO Unit * Page 1. * Added defines for Enclosure Devices Unmapped and * Device Limit Exceeded bits in Status field of SAS IO * Unit Page 2. * Added more AccessStatus values for SAS Device Page 0. * Added bit for SATA Asynchronous Notification Support in * Flags field of SAS Device Page 0. * 02-28-07 01.05.14 Added ExtFlags field to Manufacturing Page 4. * Added Disable SMART Polling for CapabilitiesFlags of * IOC Page 6. * Added Disable SMART Polling to DeviceSettings of BIOS * Page 1. * Added Multi-Port Domain bit for DiscoveryStatus field * of SAS IO Unit Page. * Added Multi-Port Domain Illegal flag for SAS IO Unit * Page 1 AdditionalControlFlags field. * 05-24-07 01.05.15 Added Hide Physical Disks with Non-Integrated RAID * Metadata bit to Manufacturing Page 4 ExtFlags field. * Added Internal Connector to End Device Present bit to * Expander Page 0 Flags field. * Fixed define for * MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED. * 08-07-07 01.05.16 Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT * define. * Added BIOS Page 4 structure. * Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID * Physical Disk Page 1. * 01-15-07 01.05.17 Added additional bit defines for ExtFlags field of * Manufacturing Page 4. * Added Solid State Drives Supported bit to IOC Page 6 * Capabilities Flags. * Added new value for AccessStatus field of SAS Device * Page 0 (_SATA_NEEDS_INITIALIZATION). * 03-28-08 01.05.18 Defined new bits in Manufacturing Page 4 ExtFlags field * to control coercion size and the mixing of SAS and SATA * SSD drives. * -------------------------------------------------------------------------- */ #ifndef MPI_CNFG_H #define MPI_CNFG_H /***************************************************************************** * * C o n f i g M e s s a g e a n d S t r u c t u r e s * *****************************************************************************/ pConfigPageHeader_t; PTR_CONFIG_PAGE_HEADER_UNION; pConfigExtendedPageHeader_t; /**************************************************************************** * PageType field values ****************************************************************************/ #define MPI_CONFIG_PAGEATTR_READ_ONLY … #define MPI_CONFIG_PAGEATTR_CHANGEABLE … #define MPI_CONFIG_PAGEATTR_PERSISTENT … #define MPI_CONFIG_PAGEATTR_RO_PERSISTENT … #define MPI_CONFIG_PAGEATTR_MASK … #define MPI_CONFIG_PAGETYPE_IO_UNIT … #define MPI_CONFIG_PAGETYPE_IOC … #define MPI_CONFIG_PAGETYPE_BIOS … #define MPI_CONFIG_PAGETYPE_SCSI_PORT … #define MPI_CONFIG_PAGETYPE_SCSI_DEVICE … #define MPI_CONFIG_PAGETYPE_FC_PORT … #define MPI_CONFIG_PAGETYPE_FC_DEVICE … #define MPI_CONFIG_PAGETYPE_LAN … #define MPI_CONFIG_PAGETYPE_RAID_VOLUME … #define MPI_CONFIG_PAGETYPE_MANUFACTURING … #define MPI_CONFIG_PAGETYPE_RAID_PHYSDISK … #define MPI_CONFIG_PAGETYPE_INBAND … #define MPI_CONFIG_PAGETYPE_EXTENDED … #define MPI_CONFIG_PAGETYPE_MASK … #define MPI_CONFIG_TYPENUM_MASK … /**************************************************************************** * ExtPageType field values ****************************************************************************/ #define MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT … #define MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER … #define MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE … #define MPI_CONFIG_EXTPAGETYPE_SAS_PHY … #define MPI_CONFIG_EXTPAGETYPE_LOG … #define MPI_CONFIG_EXTPAGETYPE_ENCLOSURE … /**************************************************************************** * PageAddress field values ****************************************************************************/ #define MPI_SCSI_PORT_PGAD_PORT_MASK … #define MPI_SCSI_DEVICE_FORM_MASK … #define MPI_SCSI_DEVICE_FORM_BUS_TID … #define MPI_SCSI_DEVICE_TARGET_ID_MASK … #define MPI_SCSI_DEVICE_TARGET_ID_SHIFT … #define MPI_SCSI_DEVICE_BUS_MASK … #define MPI_SCSI_DEVICE_BUS_SHIFT … #define MPI_SCSI_DEVICE_FORM_TARGET_MODE … #define MPI_SCSI_DEVICE_TM_RESPOND_ID_MASK … #define MPI_SCSI_DEVICE_TM_RESPOND_ID_SHIFT … #define MPI_SCSI_DEVICE_TM_BUS_MASK … #define MPI_SCSI_DEVICE_TM_BUS_SHIFT … #define MPI_SCSI_DEVICE_TM_INIT_ID_MASK … #define MPI_SCSI_DEVICE_TM_INIT_ID_SHIFT … #define MPI_FC_PORT_PGAD_PORT_MASK … #define MPI_FC_PORT_PGAD_PORT_SHIFT … #define MPI_FC_PORT_PGAD_FORM_MASK … #define MPI_FC_PORT_PGAD_FORM_INDEX … #define MPI_FC_PORT_PGAD_INDEX_MASK … #define MPI_FC_PORT_PGAD_INDEX_SHIFT … #define MPI_FC_DEVICE_PGAD_PORT_MASK … #define MPI_FC_DEVICE_PGAD_PORT_SHIFT … #define MPI_FC_DEVICE_PGAD_FORM_MASK … #define MPI_FC_DEVICE_PGAD_FORM_NEXT_DID … #define MPI_FC_DEVICE_PGAD_ND_PORT_MASK … #define MPI_FC_DEVICE_PGAD_ND_PORT_SHIFT … #define MPI_FC_DEVICE_PGAD_ND_DID_MASK … #define MPI_FC_DEVICE_PGAD_ND_DID_SHIFT … #define MPI_FC_DEVICE_PGAD_FORM_BUS_TID … #define MPI_FC_DEVICE_PGAD_BT_BUS_MASK … #define MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT … #define MPI_FC_DEVICE_PGAD_BT_TID_MASK … #define MPI_FC_DEVICE_PGAD_BT_TID_SHIFT … #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_MASK … #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_SHIFT … #define MPI_SAS_EXPAND_PGAD_FORM_MASK … #define MPI_SAS_EXPAND_PGAD_FORM_SHIFT … #define MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE … #define MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM … #define MPI_SAS_EXPAND_PGAD_FORM_HANDLE … #define MPI_SAS_EXPAND_PGAD_GNH_MASK_HANDLE … #define MPI_SAS_EXPAND_PGAD_GNH_SHIFT_HANDLE … #define MPI_SAS_EXPAND_PGAD_HPN_MASK_PHY … #define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_PHY … #define MPI_SAS_EXPAND_PGAD_HPN_MASK_HANDLE … #define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_HANDLE … #define MPI_SAS_EXPAND_PGAD_H_MASK_HANDLE … #define MPI_SAS_EXPAND_PGAD_H_SHIFT_HANDLE … #define MPI_SAS_DEVICE_PGAD_FORM_MASK … #define MPI_SAS_DEVICE_PGAD_FORM_SHIFT … #define MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE … #define MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID … #define MPI_SAS_DEVICE_PGAD_FORM_HANDLE … #define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_MASK … #define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_SHIFT … #define MPI_SAS_DEVICE_PGAD_BT_BUS_MASK … #define MPI_SAS_DEVICE_PGAD_BT_BUS_SHIFT … #define MPI_SAS_DEVICE_PGAD_BT_TID_MASK … #define MPI_SAS_DEVICE_PGAD_BT_TID_SHIFT … #define MPI_SAS_DEVICE_PGAD_H_HANDLE_MASK … #define MPI_SAS_DEVICE_PGAD_H_HANDLE_SHIFT … #define MPI_SAS_PHY_PGAD_FORM_MASK … #define MPI_SAS_PHY_PGAD_FORM_SHIFT … #define MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER … #define MPI_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX … #define MPI_SAS_PHY_PGAD_PHY_NUMBER_MASK … #define MPI_SAS_PHY_PGAD_PHY_NUMBER_SHIFT … #define MPI_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK … #define MPI_SAS_PHY_PGAD_PHY_TBL_INDEX_SHIFT … #define MPI_SAS_ENCLOS_PGAD_FORM_MASK … #define MPI_SAS_ENCLOS_PGAD_FORM_SHIFT … #define MPI_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE … #define MPI_SAS_ENCLOS_PGAD_FORM_HANDLE … #define MPI_SAS_ENCLOS_PGAD_GNH_HANDLE_MASK … #define MPI_SAS_ENCLOS_PGAD_GNH_HANDLE_SHIFT … #define MPI_SAS_ENCLOS_PGAD_H_HANDLE_MASK … #define MPI_SAS_ENCLOS_PGAD_H_HANDLE_SHIFT … /**************************************************************************** * Config Request Message ****************************************************************************/ pConfig_t; /**************************************************************************** * Action field values ****************************************************************************/ #define MPI_CONFIG_ACTION_PAGE_HEADER … #define MPI_CONFIG_ACTION_PAGE_READ_CURRENT … #define MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT … #define MPI_CONFIG_ACTION_PAGE_DEFAULT … #define MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM … #define MPI_CONFIG_ACTION_PAGE_READ_DEFAULT … #define MPI_CONFIG_ACTION_PAGE_READ_NVRAM … /* Config Reply Message */ pConfigReply_t; /***************************************************************************** * * C o n f i g u r a t i o n P a g e s * *****************************************************************************/ /**************************************************************************** * Manufacturing Config pages ****************************************************************************/ #define MPI_MANUFACTPAGE_VENDORID_LSILOGIC … /* Fibre Channel */ #define MPI_MANUFACTPAGE_DEVICEID_FC909 … #define MPI_MANUFACTPAGE_DEVICEID_FC919 … #define MPI_MANUFACTPAGE_DEVICEID_FC929 … #define MPI_MANUFACTPAGE_DEVICEID_FC919X … #define MPI_MANUFACTPAGE_DEVICEID_FC929X … #define MPI_MANUFACTPAGE_DEVICEID_FC939X … #define MPI_MANUFACTPAGE_DEVICEID_FC949X … #define MPI_MANUFACTPAGE_DEVICEID_FC949E … /* SCSI */ #define MPI_MANUFACTPAGE_DEVID_53C1030 … #define MPI_MANUFACTPAGE_DEVID_53C1030ZC … #define MPI_MANUFACTPAGE_DEVID_1030_53C1035 … #define MPI_MANUFACTPAGE_DEVID_1030ZC_53C1035 … #define MPI_MANUFACTPAGE_DEVID_53C1035 … #define MPI_MANUFACTPAGE_DEVID_53C1035ZC … /* SAS */ #define MPI_MANUFACTPAGE_DEVID_SAS1064 … #define MPI_MANUFACTPAGE_DEVID_SAS1064A … #define MPI_MANUFACTPAGE_DEVID_SAS1064E … #define MPI_MANUFACTPAGE_DEVID_SAS1066 … #define MPI_MANUFACTPAGE_DEVID_SAS1066E … #define MPI_MANUFACTPAGE_DEVID_SAS1068 … #define MPI_MANUFACTPAGE_DEVID_SAS1068E … #define MPI_MANUFACTPAGE_DEVID_SAS1068_820XELP … #define MPI_MANUFACTPAGE_DEVID_SAS1078 … pManufacturingPage0_t; #define MPI_MANUFACTURING0_PAGEVERSION … pManufacturingPage1_t; #define MPI_MANUFACTURING1_PAGEVERSION … pMpiChipRevisionId_t; /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_MAN_PAGE_2_HW_SETTINGS_WORDS #define MPI_MAN_PAGE_2_HW_SETTINGS_WORDS … #endif pManufacturingPage2_t; #define MPI_MANUFACTURING2_PAGEVERSION … /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_MAN_PAGE_3_INFO_WORDS #define MPI_MAN_PAGE_3_INFO_WORDS … #endif pManufacturingPage3_t; #define MPI_MANUFACTURING3_PAGEVERSION … pManufacturingPage4_t; #define MPI_MANUFACTURING4_PAGEVERSION … /* defines for the Flags field */ #define MPI_MANPAGE4_FORCE_BAD_BLOCK_TABLE … #define MPI_MANPAGE4_FORCE_OFFLINE_FAILOVER … #define MPI_MANPAGE4_IME_DISABLE … #define MPI_MANPAGE4_IM_DISABLE … #define MPI_MANPAGE4_IS_DISABLE … #define MPI_MANPAGE4_IR_MODEPAGE8_DISABLE … #define MPI_MANPAGE4_IM_RESYNC_CACHE_ENABLE … #define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA … /* defines for the ExtFlags field */ #define MPI_MANPAGE4_EXTFLAGS_MASK_COERCION_SIZE … #define MPI_MANPAGE4_EXTFLAGS_SHIFT_COERCION_SIZE … #define MPI_MANPAGE4_EXTFLAGS_1GB_COERCION_SIZE … #define MPI_MANPAGE4_EXTFLAGS_128MB_COERCION_SIZE … #define MPI_MANPAGE4_EXTFLAGS_NO_MIX_SSD_SAS_SATA … #define MPI_MANPAGE4_EXTFLAGS_MIX_SSD_AND_NON_SSD … #define MPI_MANPAGE4_EXTFLAGS_DUAL_PORT_SUPPORT … #define MPI_MANPAGE4_EXTFLAGS_HIDE_NON_IR_METADATA … #define MPI_MANPAGE4_EXTFLAGS_SAS_CACHE_DISABLE … #define MPI_MANPAGE4_EXTFLAGS_SATA_CACHE_DISABLE … #define MPI_MANPAGE4_EXTFLAGS_LEGACY_MODE … #ifndef MPI_MANPAGE5_NUM_FORCEWWID #define MPI_MANPAGE5_NUM_FORCEWWID … #endif pManufacturingPage5_t; #define MPI_MANUFACTURING5_PAGEVERSION … /* defines for the Flags field */ #define MPI_MANPAGE5_TWO_WWID_PER_PHY … pManufacturingPage6_t; #define MPI_MANUFACTURING6_PAGEVERSION … pMpiManPage7ConnectorInfo_t; /* defines for the Pinout field */ #define MPI_MANPAGE7_PINOUT_SFF_8484_L4 … #define MPI_MANPAGE7_PINOUT_SFF_8484_L3 … #define MPI_MANPAGE7_PINOUT_SFF_8484_L2 … #define MPI_MANPAGE7_PINOUT_SFF_8484_L1 … #define MPI_MANPAGE7_PINOUT_SFF_8470_L4 … #define MPI_MANPAGE7_PINOUT_SFF_8470_L3 … #define MPI_MANPAGE7_PINOUT_SFF_8470_L2 … #define MPI_MANPAGE7_PINOUT_SFF_8470_L1 … #define MPI_MANPAGE7_PINOUT_SFF_8482 … #define MPI_MANPAGE7_PINOUT_CONNECTION_UNKNOWN … /* defines for the Location field */ #define MPI_MANPAGE7_LOCATION_UNKNOWN … #define MPI_MANPAGE7_LOCATION_INTERNAL … #define MPI_MANPAGE7_LOCATION_EXTERNAL … #define MPI_MANPAGE7_LOCATION_SWITCHABLE … #define MPI_MANPAGE7_LOCATION_AUTO … #define MPI_MANPAGE7_LOCATION_NOT_PRESENT … #define MPI_MANPAGE7_LOCATION_NOT_CONNECTED … /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check NumPhys at runtime. */ #ifndef MPI_MANPAGE7_CONNECTOR_INFO_MAX #define MPI_MANPAGE7_CONNECTOR_INFO_MAX … #endif pManufacturingPage7_t; #define MPI_MANUFACTURING7_PAGEVERSION … /* defines for the Flags field */ #define MPI_MANPAGE7_FLAG_USE_SLOT_INFO … pManufacturingPage8_t; #define MPI_MANUFACTURING8_PAGEVERSION … pManufacturingPage9_t; #define MPI_MANUFACTURING9_PAGEVERSION … pManufacturingPage10_t; #define MPI_MANUFACTURING10_PAGEVERSION … /**************************************************************************** * IO Unit Config Pages ****************************************************************************/ pIOUnitPage0_t; #define MPI_IOUNITPAGE0_PAGEVERSION … pIOUnitPage1_t; #define MPI_IOUNITPAGE1_PAGEVERSION … /* IO Unit Page 1 Flags defines */ #define MPI_IOUNITPAGE1_MULTI_FUNCTION … #define MPI_IOUNITPAGE1_SINGLE_FUNCTION … #define MPI_IOUNITPAGE1_MULTI_PATHING … #define MPI_IOUNITPAGE1_SINGLE_PATHING … #define MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID … #define MPI_IOUNITPAGE1_DISABLE_QUEUE_FULL_HANDLING … #define MPI_IOUNITPAGE1_DISABLE_IR … #define MPI_IOUNITPAGE1_FORCE_32 … #define MPI_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE … #define MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE … pMpiAdapterInfo_t; #define MPI_ADAPTER_INFO_FLAGS_EMBEDDED … #define MPI_ADAPTER_INFO_FLAGS_INIT_STATUS … pIOUnitPage2_t; #define MPI_IOUNITPAGE2_PAGEVERSION … #define MPI_IOUNITPAGE2_FLAGS_PAUSE_ON_ERROR … #define MPI_IOUNITPAGE2_FLAGS_VERBOSE_ENABLE … #define MPI_IOUNITPAGE2_FLAGS_COLOR_VIDEO_DISABLE … #define MPI_IOUNITPAGE2_FLAGS_DONT_HOOK_INT_40 … #define MPI_IOUNITPAGE2_FLAGS_DEV_LIST_DISPLAY_MASK … #define MPI_IOUNITPAGE2_FLAGS_INSTALLED_DEV_DISPLAY … #define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DISPLAY … #define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DEV_DISPLAY … /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX #define MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX … #endif pIOUnitPage3_t; #define MPI_IOUNITPAGE3_PAGEVERSION … #define MPI_IOUNITPAGE3_GPIO_FUNCTION_MASK … #define MPI_IOUNITPAGE3_GPIO_FUNCTION_SHIFT … #define MPI_IOUNITPAGE3_GPIO_SETTING_OFF … #define MPI_IOUNITPAGE3_GPIO_SETTING_ON … pIOUnitPage4_t; #define MPI_IOUNITPAGE4_PAGEVERSION … /**************************************************************************** * IOC Config Pages ****************************************************************************/ pIOCPage0_t; #define MPI_IOCPAGE0_PAGEVERSION … pIOCPage1_t; #define MPI_IOCPAGE1_PAGEVERSION … /* defines for the Flags field */ #define MPI_IOCPAGE1_EEDP_MODE_MASK … #define MPI_IOCPAGE1_EEDP_MODE_OFF … #define MPI_IOCPAGE1_EEDP_MODE_T10 … #define MPI_IOCPAGE1_EEDP_MODE_LSI_1 … #define MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE … #define MPI_IOCPAGE1_REPLY_COALESCING … #define MPI_IOCPAGE1_PCISLOTNUM_UNKNOWN … pConfigPageIoc2RaidVol_t; /* IOC Page 2 Volume RAID Type values, also used in RAID Volume pages */ #define MPI_RAID_VOL_TYPE_IS … #define MPI_RAID_VOL_TYPE_IME … #define MPI_RAID_VOL_TYPE_IM … #define MPI_RAID_VOL_TYPE_RAID_5 … #define MPI_RAID_VOL_TYPE_RAID_6 … #define MPI_RAID_VOL_TYPE_RAID_10 … #define MPI_RAID_VOL_TYPE_RAID_50 … #define MPI_RAID_VOL_TYPE_UNKNOWN … /* IOC Page 2 Volume Flags values */ #define MPI_IOCPAGE2_FLAG_VOLUME_INACTIVE … pIOCPage2_t; #define MPI_IOCPAGE2_PAGEVERSION … /* IOC Page 2 Capabilities flags */ #define MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT … #define MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT … #define MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT … #define MPI_IOCPAGE2_CAP_FLAGS_RAID_5_SUPPORT … #define MPI_IOCPAGE2_CAP_FLAGS_RAID_6_SUPPORT … #define MPI_IOCPAGE2_CAP_FLAGS_RAID_10_SUPPORT … #define MPI_IOCPAGE2_CAP_FLAGS_RAID_50_SUPPORT … #define MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING … #define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT … #define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT … #define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT … pIoc3PhysDisk_t; pIOCPage3_t; #define MPI_IOCPAGE3_PAGEVERSION … pIoc4Sep_t; pIOCPage4_t; #define MPI_IOCPAGE4_PAGEVERSION … pIoc5HotSpare_t; /* IOC Page 5 HotSpare Flags */ #define MPI_IOC_PAGE_5_HOT_SPARE_ACTIVE … /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_IOC_PAGE_5_HOT_SPARE_MAX #define MPI_IOC_PAGE_5_HOT_SPARE_MAX … #endif pIOCPage5_t; #define MPI_IOCPAGE5_PAGEVERSION … pIOCPage6_t; #define MPI_IOCPAGE6_PAGEVERSION … /* IOC Page 6 Capabilities Flags */ #define MPI_IOCPAGE6_CAP_FLAGS_SSD_SUPPORT … #define MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT … #define MPI_IOCPAGE6_CAP_FLAGS_DISABLE_SMART_POLLING … #define MPI_IOCPAGE6_CAP_FLAGS_MASK_METADATA_SIZE … #define MPI_IOCPAGE6_CAP_FLAGS_64MB_METADATA_SIZE … #define MPI_IOCPAGE6_CAP_FLAGS_512MB_METADATA_SIZE … #define MPI_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE … /**************************************************************************** * BIOS Config Pages ****************************************************************************/ pBIOSPage1_t; #define MPI_BIOSPAGE1_PAGEVERSION … /* values for the BiosOptions field */ #define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE … #define MPI_BIOSPAGE1_OPTIONS_FC_ENABLE … #define MPI_BIOSPAGE1_OPTIONS_SAS_ENABLE … #define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS … /* values for the IOCSettings field */ #define MPI_BIOSPAGE1_IOCSET_MASK_INITIAL_SPINUP_DELAY … #define MPI_BIOSPAGE1_IOCSET_SHIFT_INITIAL_SPINUP_DELAY … #define MPI_BIOSPAGE1_IOCSET_MASK_PORT_ENABLE_DELAY … #define MPI_BIOSPAGE1_IOCSET_SHIFT_PORT_ENABLE_DELAY … #define MPI_BIOSPAGE1_IOCSET_AUTO_PORT_ENABLE … #define MPI_BIOSPAGE1_IOCSET_DIRECT_ATTACH_SPINUP_MODE … #define MPI_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE … #define MPI_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT … #define MPI_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT … #define MPI_BIOSPAGE1_IOCSET_MASK_MAX_TARGET_SPIN_UP … #define MPI_BIOSPAGE1_IOCSET_SHIFT_MAX_TARGET_SPIN_UP … #define MPI_BIOSPAGE1_IOCSET_MASK_SPINUP_DELAY … #define MPI_BIOSPAGE1_IOCSET_SHIFT_SPINUP_DELAY … #define MPI_BIOSPAGE1_IOCSET_MASK_RM_SETTING … #define MPI_BIOSPAGE1_IOCSET_NONE_RM_SETTING … #define MPI_BIOSPAGE1_IOCSET_BOOT_RM_SETTING … #define MPI_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING … #define MPI_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT … #define MPI_BIOSPAGE1_IOCSET_NO_SUPPORT … #define MPI_BIOSPAGE1_IOCSET_BIOS_SUPPORT … #define MPI_BIOSPAGE1_IOCSET_OS_SUPPORT … #define MPI_BIOSPAGE1_IOCSET_ALL_SUPPORT … #define MPI_BIOSPAGE1_IOCSET_ALTERNATE_CHS … /* values for the DeviceSettings field */ #define MPI_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING … #define MPI_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN … #define MPI_BIOSPAGE1_DEVSET_DISABLE_RM_LUN … #define MPI_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN … #define MPI_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN … /* defines for the ExpanderSpinup field */ #define MPI_BIOSPAGE1_EXPSPINUP_MASK_MAX_TARGET … #define MPI_BIOSPAGE1_EXPSPINUP_SHIFT_MAX_TARGET … #define MPI_BIOSPAGE1_EXPSPINUP_MASK_DELAY … PTR_MPI_BOOT_DEVICE_ADAPTER_ORDER; PTR_MPI_BOOT_DEVICE_ADAPTER_NUMBER; PTR_MPI_BOOT_DEVICE_PCI_ADDRESS; PTR_MPI_BOOT_DEVICE_PCI_SLOT_NUMBER; PTR_MPI_BOOT_DEVICE_FC_WWN; PTR_MPI_BOOT_DEVICE_SAS_WWN; PTR_MPI_BOOT_DEVICE_ENCLOSURE_SLOT; PTR_MPI_BIOSPAGE2_BOOT_DEVICE; pBIOSPage2_t; #define MPI_BIOSPAGE2_PAGEVERSION … #define MPI_BIOSPAGE2_FORM_MASK … #define MPI_BIOSPAGE2_FORM_ADAPTER_ORDER … #define MPI_BIOSPAGE2_FORM_ADAPTER_NUMBER … #define MPI_BIOSPAGE2_FORM_PCI_ADDRESS … #define MPI_BIOSPAGE2_FORM_PCI_SLOT_NUMBER … #define MPI_BIOSPAGE2_FORM_FC_WWN … #define MPI_BIOSPAGE2_FORM_SAS_WWN … #define MPI_BIOSPAGE2_FORM_ENCLOSURE_SLOT … pBIOSPage4_t; #define MPI_BIOSPAGE4_PAGEVERSION … /**************************************************************************** * SCSI Port Config Pages ****************************************************************************/ pSCSIPortPage0_t; #define MPI_SCSIPORTPAGE0_PAGEVERSION … #define MPI_SCSIPORTPAGE0_CAP_IU … #define MPI_SCSIPORTPAGE0_CAP_DT … #define MPI_SCSIPORTPAGE0_CAP_QAS … #define MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK … #define MPI_SCSIPORTPAGE0_SYNC_ASYNC … #define MPI_SCSIPORTPAGE0_SYNC_5 … #define MPI_SCSIPORTPAGE0_SYNC_10 … #define MPI_SCSIPORTPAGE0_SYNC_20 … #define MPI_SCSIPORTPAGE0_SYNC_33_33 … #define MPI_SCSIPORTPAGE0_SYNC_40 … #define MPI_SCSIPORTPAGE0_SYNC_80 … #define MPI_SCSIPORTPAGE0_SYNC_160 … #define MPI_SCSIPORTPAGE0_SYNC_UNKNOWN … #define MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD … #define MPI_SCSIPORTPAGE0_CAP_GET_MIN_SYNC_PERIOD(Cap) … #define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK … #define MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET … #define MPI_SCSIPORTPAGE0_CAP_GET_MAX_SYNC_OFFSET(Cap) … #define MPI_SCSIPORTPAGE0_CAP_IDP … #define MPI_SCSIPORTPAGE0_CAP_WIDE … #define MPI_SCSIPORTPAGE0_CAP_AIP … #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK … #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD … #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE … #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_LVD … #define MPI_SCSIPORTPAGE0_PHY_MASK_CONNECTED_ID … #define MPI_SCSIPORTPAGE0_PHY_SHIFT_CONNECTED_ID … #define MPI_SCSIPORTPAGE0_PHY_BUS_FREE_CONNECTED_ID … #define MPI_SCSIPORTPAGE0_PHY_UNKNOWN_CONNECTED_ID … pSCSIPortPage1_t; #define MPI_SCSIPORTPAGE1_PAGEVERSION … /* Configuration values */ #define MPI_SCSIPORTPAGE1_CFG_PORT_SCSI_ID_MASK … #define MPI_SCSIPORTPAGE1_CFG_PORT_RESPONSE_ID_MASK … #define MPI_SCSIPORTPAGE1_CFG_SHIFT_PORT_RESPONSE_ID … /* TargetConfig values */ #define MPI_SCSIPORTPAGE1_TARGCONFIG_TARG_ONLY … #define MPI_SCSIPORTPAGE1_TARGCONFIG_INIT_TARG … pMpiDeviceInfo_t; pSCSIPortPage2_t; #define MPI_SCSIPORTPAGE2_PAGEVERSION … /* PortFlags values */ #define MPI_SCSIPORTPAGE2_PORT_FLAGS_SCAN_HIGH_TO_LOW … #define MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET … #define MPI_SCSIPORTPAGE2_PORT_FLAGS_ALTERNATE_CHS … #define MPI_SCSIPORTPAGE2_PORT_FLAGS_TERMINATION_DISABLE … #define MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK … #define MPI_SCSIPORTPAGE2_PORT_FLAGS_FULL_DV … #define MPI_SCSIPORTPAGE2_PORT_FLAGS_BASIC_DV_ONLY … #define MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV … /* PortSettings values */ #define MPI_SCSIPORTPAGE2_PORT_HOST_ID_MASK … #define MPI_SCSIPORTPAGE2_PORT_MASK_INIT_HBA … #define MPI_SCSIPORTPAGE2_PORT_DISABLE_INIT_HBA … #define MPI_SCSIPORTPAGE2_PORT_BIOS_INIT_HBA … #define MPI_SCSIPORTPAGE2_PORT_OS_INIT_HBA … #define MPI_SCSIPORTPAGE2_PORT_BIOS_OS_INIT_HBA … #define MPI_SCSIPORTPAGE2_PORT_REMOVABLE_MEDIA … #define MPI_SCSIPORTPAGE2_PORT_RM_NONE … #define MPI_SCSIPORTPAGE2_PORT_RM_BOOT_ONLY … #define MPI_SCSIPORTPAGE2_PORT_RM_WITH_MEDIA … #define MPI_SCSIPORTPAGE2_PORT_SPINUP_DELAY_MASK … #define MPI_SCSIPORTPAGE2_PORT_SHIFT_SPINUP_DELAY … #define MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS … #define MPI_SCSIPORTPAGE2_PORT_NEGO_MASTER_SETTINGS … #define MPI_SCSIPORTPAGE2_PORT_NONE_MASTER_SETTINGS … #define MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS … #define MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE … #define MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE … #define MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE … #define MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE … #define MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE … #define MPI_SCSIPORTPAGE2_DEVICE_BOOT_CHOICE … /**************************************************************************** * SCSI Target Device Config Pages ****************************************************************************/ pSCSIDevicePage0_t; #define MPI_SCSIDEVPAGE0_PAGEVERSION … #define MPI_SCSIDEVPAGE0_NP_IU … #define MPI_SCSIDEVPAGE0_NP_DT … #define MPI_SCSIDEVPAGE0_NP_QAS … #define MPI_SCSIDEVPAGE0_NP_HOLD_MCS … #define MPI_SCSIDEVPAGE0_NP_WR_FLOW … #define MPI_SCSIDEVPAGE0_NP_RD_STRM … #define MPI_SCSIDEVPAGE0_NP_RTI … #define MPI_SCSIDEVPAGE0_NP_PCOMP_EN … #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK … #define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD … #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK … #define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET … #define MPI_SCSIDEVPAGE0_NP_IDP … #define MPI_SCSIDEVPAGE0_NP_WIDE … #define MPI_SCSIDEVPAGE0_NP_AIP … #define MPI_SCSIDEVPAGE0_INFO_PARAMS_NEGOTIATED … #define MPI_SCSIDEVPAGE0_INFO_SDTR_REJECTED … #define MPI_SCSIDEVPAGE0_INFO_WDTR_REJECTED … #define MPI_SCSIDEVPAGE0_INFO_PPR_REJECTED … pSCSIDevicePage1_t; #define MPI_SCSIDEVPAGE1_PAGEVERSION … #define MPI_SCSIDEVPAGE1_RP_IU … #define MPI_SCSIDEVPAGE1_RP_DT … #define MPI_SCSIDEVPAGE1_RP_QAS … #define MPI_SCSIDEVPAGE1_RP_HOLD_MCS … #define MPI_SCSIDEVPAGE1_RP_WR_FLOW … #define MPI_SCSIDEVPAGE1_RP_RD_STRM … #define MPI_SCSIDEVPAGE1_RP_RTI … #define MPI_SCSIDEVPAGE1_RP_PCOMP_EN … #define MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK … #define MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD … #define MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK … #define MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET … #define MPI_SCSIDEVPAGE1_RP_IDP … #define MPI_SCSIDEVPAGE1_RP_WIDE … #define MPI_SCSIDEVPAGE1_RP_AIP … #define MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED … #define MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED … #define MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE … #define MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG … pSCSIDevicePage2_t; #define MPI_SCSIDEVPAGE2_PAGEVERSION … #define MPI_SCSIDEVPAGE2_DV_ISI_ENABLE … #define MPI_SCSIDEVPAGE2_DV_SECONDARY_DRIVER_ENABLE … #define MPI_SCSIDEVPAGE2_DV_SLEW_RATE_CTRL … #define MPI_SCSIDEVPAGE2_DV_PRIM_DRIVE_STR_CTRL … #define MPI_SCSIDEVPAGE2_DV_SECOND_DRIVE_STR_CTRL … #define MPI_SCSIDEVPAGE2_DV_XCLKH_ST … #define MPI_SCSIDEVPAGE2_DV_XCLKS_ST … #define MPI_SCSIDEVPAGE2_DV_XCLKH_DT … #define MPI_SCSIDEVPAGE2_DV_XCLKS_DT … #define MPI_SCSIDEVPAGE2_PPS_PPS_MASK … #define MPI_SCSIDEVPAGE2_DPS_BIT_0_PL_SELECT_MASK … #define MPI_SCSIDEVPAGE2_DPS_BIT_1_PL_SELECT_MASK … #define MPI_SCSIDEVPAGE2_DPS_BIT_2_PL_SELECT_MASK … #define MPI_SCSIDEVPAGE2_DPS_BIT_3_PL_SELECT_MASK … #define MPI_SCSIDEVPAGE2_DPS_BIT_4_PL_SELECT_MASK … #define MPI_SCSIDEVPAGE2_DPS_BIT_5_PL_SELECT_MASK … #define MPI_SCSIDEVPAGE2_DPS_BIT_6_PL_SELECT_MASK … #define MPI_SCSIDEVPAGE2_DPS_BIT_7_PL_SELECT_MASK … #define MPI_SCSIDEVPAGE2_DPS_BIT_8_PL_SELECT_MASK … #define MPI_SCSIDEVPAGE2_DPS_BIT_9_PL_SELECT_MASK … #define MPI_SCSIDEVPAGE2_DPS_BIT_10_PL_SELECT_MASK … #define MPI_SCSIDEVPAGE2_DPS_BIT_11_PL_SELECT_MASK … #define MPI_SCSIDEVPAGE2_DPS_BIT_12_PL_SELECT_MASK … #define MPI_SCSIDEVPAGE2_DPS_BIT_13_PL_SELECT_MASK … #define MPI_SCSIDEVPAGE2_DPS_BIT_14_PL_SELECT_MASK … #define MPI_SCSIDEVPAGE2_DPS_BIT_15_PL_SELECT_MASK … pSCSIDevicePage3_t; #define MPI_SCSIDEVPAGE3_PAGEVERSION … #define MPI_SCSIDEVPAGE3_MAX_COUNTER … #define MPI_SCSIDEVPAGE3_UNSUPPORTED_COUNTER … /**************************************************************************** * FC Port Config Pages ****************************************************************************/ pFCPortPage0_t; #define MPI_FCPORTPAGE0_PAGEVERSION … #define MPI_FCPORTPAGE0_FLAGS_PROT_MASK … #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_INIT … #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_TARG … #define MPI_FCPORTPAGE0_FLAGS_PROT_LAN … #define MPI_FCPORTPAGE0_FLAGS_PROT_LOGBUSADDR … #define MPI_FCPORTPAGE0_FLAGS_ALIAS_ALPA_SUPPORTED … #define MPI_FCPORTPAGE0_FLAGS_ALIAS_WWN_SUPPORTED … #define MPI_FCPORTPAGE0_FLAGS_FABRIC_WWN_VALID … #define MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK … #define MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT … #define MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT … #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP … #define MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT … #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP … #define MPI_FCPORTPAGE0_LTYPE_RESERVED … #define MPI_FCPORTPAGE0_LTYPE_OTHER … #define MPI_FCPORTPAGE0_LTYPE_UNKNOWN … #define MPI_FCPORTPAGE0_LTYPE_COPPER … #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1300 … #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1500 … #define MPI_FCPORTPAGE0_LTYPE_50_LASER_MULTI … #define MPI_FCPORTPAGE0_LTYPE_50_LED_MULTI … #define MPI_FCPORTPAGE0_LTYPE_62_LASER_MULTI … #define MPI_FCPORTPAGE0_LTYPE_62_LED_MULTI … #define MPI_FCPORTPAGE0_LTYPE_MULTI_LONG_WAVE … #define MPI_FCPORTPAGE0_LTYPE_MULTI_SHORT_WAVE … #define MPI_FCPORTPAGE0_LTYPE_LASER_SHORT_WAVE … #define MPI_FCPORTPAGE0_LTYPE_LED_SHORT_WAVE … #define MPI_FCPORTPAGE0_LTYPE_1300_LONG_WAVE … #define MPI_FCPORTPAGE0_LTYPE_1500_LONG_WAVE … #define MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN … #define MPI_FCPORTPAGE0_PORTSTATE_ONLINE … #define MPI_FCPORTPAGE0_PORTSTATE_OFFLINE … #define MPI_FCPORTPAGE0_PORTSTATE_BYPASSED … #define MPI_FCPORTPAGE0_PORTSTATE_DIAGNOST … #define MPI_FCPORTPAGE0_PORTSTATE_LINKDOWN … #define MPI_FCPORTPAGE0_PORTSTATE_ERROR … #define MPI_FCPORTPAGE0_PORTSTATE_LOOPBACK … #define MPI_FCPORTPAGE0_SUPPORT_CLASS_1 … #define MPI_FCPORTPAGE0_SUPPORT_CLASS_2 … #define MPI_FCPORTPAGE0_SUPPORT_CLASS_3 … #define MPI_FCPORTPAGE0_SUPPORT_SPEED_UNKNOWN … #define MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED … #define MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED … #define MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED … #define MPI_FCPORTPAGE0_SUPPORT_4GBIT_SPEED … #define MPI_FCPORTPAGE0_CURRENT_SPEED_UNKNOWN … #define MPI_FCPORTPAGE0_CURRENT_SPEED_1GBIT … #define MPI_FCPORTPAGE0_CURRENT_SPEED_2GBIT … #define MPI_FCPORTPAGE0_CURRENT_SPEED_10GBIT … #define MPI_FCPORTPAGE0_CURRENT_SPEED_4GBIT … #define MPI_FCPORTPAGE0_CURRENT_SPEED_NOT_NEGOTIATED … pFCPortPage1_t; #define MPI_FCPORTPAGE1_PAGEVERSION … #define MPI_FCPORTPAGE1_FLAGS_EXT_FCP_STATUS_EN … #define MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY … #define MPI_FCPORTPAGE1_FLAGS_FORCE_USE_NOSEEPROM_WWNS … #define MPI_FCPORTPAGE1_FLAGS_VERBOSE_RESCAN_EVENTS … #define MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID … #define MPI_FCPORTPAGE1_FLAGS_PORT_OFFLINE … #define MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK … #define MPI_FCPORTPAGE1_FLAGS_TARGET_LARGE_CDB_ENABLE … #define MPI_FCPORTPAGE1_FLAGS_MASK_RR_TOV_UNITS … #define MPI_FCPORTPAGE1_FLAGS_SUPPRESS_PROT_REG … #define MPI_FCPORTPAGE1_FLAGS_PLOGI_ON_LOGO … #define MPI_FCPORTPAGE1_FLAGS_MAINTAIN_LOGINS … #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_DID … #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_WWN … #define MPI_FCPORTPAGE1_FLAGS_PROT_MASK … #define MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT … #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT … #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG … #define MPI_FCPORTPAGE1_FLAGS_PROT_LAN … #define MPI_FCPORTPAGE1_FLAGS_PROT_LOGBUSADDR … #define MPI_FCPORTPAGE1_FLAGS_NONE_RR_TOV_UNITS … #define MPI_FCPORTPAGE1_FLAGS_THOUSANDTH_RR_TOV_UNITS … #define MPI_FCPORTPAGE1_FLAGS_TENTH_RR_TOV_UNITS … #define MPI_FCPORTPAGE1_FLAGS_TEN_RR_TOV_UNITS … #define MPI_FCPORTPAGE1_HARD_ALPA_NOT_USED … #define MPI_FCPORTPAGE1_LCONFIG_SPEED_MASK … #define MPI_FCPORTPAGE1_LCONFIG_SPEED_1GIG … #define MPI_FCPORTPAGE1_LCONFIG_SPEED_2GIG … #define MPI_FCPORTPAGE1_LCONFIG_SPEED_4GIG … #define MPI_FCPORTPAGE1_LCONFIG_SPEED_10GIG … #define MPI_FCPORTPAGE1_LCONFIG_SPEED_AUTO … #define MPI_FCPORTPAGE1_TOPOLOGY_MASK … #define MPI_FCPORTPAGE1_TOPOLOGY_NLPORT … #define MPI_FCPORTPAGE1_TOPOLOGY_NPORT … #define MPI_FCPORTPAGE1_TOPOLOGY_AUTO … #define MPI_FCPORTPAGE1_ALT_CONN_UNKNOWN … #define MPI_FCPORTPAGE1_INITIATOR_DEV_TIMEOUT_MASK … #define MPI_FCPORTPAGE1_INITIATOR_DEV_UNIT_16 … pFCPortPage2_t; #define MPI_FCPORTPAGE2_PAGEVERSION … pWWNFormat; pPersistentPhysicalId_t; pPersistentData_t; #define MPI_PERSISTENT_FLAGS_SHIFT … #define MPI_PERSISTENT_FLAGS_ENTRY_VALID … #define MPI_PERSISTENT_FLAGS_SCAN_ID … #define MPI_PERSISTENT_FLAGS_SCAN_LUNS … #define MPI_PERSISTENT_FLAGS_BOOT_DEVICE … #define MPI_PERSISTENT_FLAGS_BY_DID … /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_FC_PORT_PAGE_3_ENTRY_MAX #define MPI_FC_PORT_PAGE_3_ENTRY_MAX … #endif pFCPortPage3_t; #define MPI_FCPORTPAGE3_PAGEVERSION … pFCPortPage4_t; #define MPI_FCPORTPAGE4_PAGEVERSION … #define MPI_FCPORTPAGE4_PORT_FLAGS_ALTERNATE_CHS … #define MPI_FCPORTPAGE4_PORT_MASK_INIT_HBA … #define MPI_FCPORTPAGE4_PORT_DISABLE_INIT_HBA … #define MPI_FCPORTPAGE4_PORT_BIOS_INIT_HBA … #define MPI_FCPORTPAGE4_PORT_OS_INIT_HBA … #define MPI_FCPORTPAGE4_PORT_BIOS_OS_INIT_HBA … #define MPI_FCPORTPAGE4_PORT_REMOVABLE_MEDIA … #define MPI_FCPORTPAGE4_PORT_SPINUP_DELAY_MASK … pFcPortPage5AliasInfo_t; pFCPortPage5_t; #define MPI_FCPORTPAGE5_PAGEVERSION … #define MPI_FCPORTPAGE5_FLAGS_ALPA_ACQUIRED … #define MPI_FCPORTPAGE5_FLAGS_HARD_ALPA … #define MPI_FCPORTPAGE5_FLAGS_HARD_WWNN … #define MPI_FCPORTPAGE5_FLAGS_HARD_WWPN … #define MPI_FCPORTPAGE5_FLAGS_DISABLE … pFCPortPage6_t; #define MPI_FCPORTPAGE6_PAGEVERSION … pFCPortPage7_t; #define MPI_FCPORTPAGE7_PAGEVERSION … pFCPortPage8_t; #define MPI_FCPORTPAGE8_PAGEVERSION … pFCPortPage9_t; #define MPI_FCPORTPAGE9_PAGEVERSION … pFCPortPage10BaseSfpData_t; #define MPI_FCPORT10_BASE_ID_UNKNOWN … #define MPI_FCPORT10_BASE_ID_GBIC … #define MPI_FCPORT10_BASE_ID_FIXED … #define MPI_FCPORT10_BASE_ID_SFP … #define MPI_FCPORT10_BASE_ID_SFP_MIN … #define MPI_FCPORT10_BASE_ID_SFP_MAX … #define MPI_FCPORT10_BASE_ID_VEND_SPEC_MASK … #define MPI_FCPORT10_BASE_EXTID_UNKNOWN … #define MPI_FCPORT10_BASE_EXTID_MODDEF1 … #define MPI_FCPORT10_BASE_EXTID_MODDEF2 … #define MPI_FCPORT10_BASE_EXTID_MODDEF3 … #define MPI_FCPORT10_BASE_EXTID_SEEPROM … #define MPI_FCPORT10_BASE_EXTID_MODDEF5 … #define MPI_FCPORT10_BASE_EXTID_MODDEF6 … #define MPI_FCPORT10_BASE_EXTID_MODDEF7 … #define MPI_FCPORT10_BASE_EXTID_VNDSPC_MASK … #define MPI_FCPORT10_BASE_CONN_UNKNOWN … #define MPI_FCPORT10_BASE_CONN_SC … #define MPI_FCPORT10_BASE_CONN_COPPER1 … #define MPI_FCPORT10_BASE_CONN_COPPER2 … #define MPI_FCPORT10_BASE_CONN_BNC_TNC … #define MPI_FCPORT10_BASE_CONN_COAXIAL … #define MPI_FCPORT10_BASE_CONN_FIBERJACK … #define MPI_FCPORT10_BASE_CONN_LC … #define MPI_FCPORT10_BASE_CONN_MT_RJ … #define MPI_FCPORT10_BASE_CONN_MU … #define MPI_FCPORT10_BASE_CONN_SG … #define MPI_FCPORT10_BASE_CONN_OPT_PIGT … #define MPI_FCPORT10_BASE_CONN_RSV1_MIN … #define MPI_FCPORT10_BASE_CONN_RSV1_MAX … #define MPI_FCPORT10_BASE_CONN_HSSDC_II … #define MPI_FCPORT10_BASE_CONN_CPR_PIGT … #define MPI_FCPORT10_BASE_CONN_RSV2_MIN … #define MPI_FCPORT10_BASE_CONN_RSV2_MAX … #define MPI_FCPORT10_BASE_CONN_VNDSPC_MASK … #define MPI_FCPORT10_BASE_ENCODE_UNSPEC … #define MPI_FCPORT10_BASE_ENCODE_8B10B … #define MPI_FCPORT10_BASE_ENCODE_4B5B … #define MPI_FCPORT10_BASE_ENCODE_NRZ … #define MPI_FCPORT10_BASE_ENCODE_MANCHESTER … pFCPortPage10ExtendedSfpData_t; #define MPI_FCPORT10_EXT_OPTION1_RATESEL … #define MPI_FCPORT10_EXT_OPTION1_TX_DISABLE … #define MPI_FCPORT10_EXT_OPTION1_TX_FAULT … #define MPI_FCPORT10_EXT_OPTION1_LOS_INVERT … #define MPI_FCPORT10_EXT_OPTION1_LOS … pFCPortPage10_t; #define MPI_FCPORTPAGE10_PAGEVERSION … /* standard MODDEF pin definitions (from GBIC spec.) */ #define MPI_FCPORTPAGE10_FLAGS_MODDEF_MASK … #define MPI_FCPORTPAGE10_FLAGS_MODDEF2 … #define MPI_FCPORTPAGE10_FLAGS_MODDEF1 … #define MPI_FCPORTPAGE10_FLAGS_MODDEF0 … #define MPI_FCPORTPAGE10_FLAGS_MODDEF_NOGBIC … #define MPI_FCPORTPAGE10_FLAGS_MODDEF_CPR_IEEE_CX … #define MPI_FCPORTPAGE10_FLAGS_MODDEF_COPPER … #define MPI_FCPORTPAGE10_FLAGS_MODDEF_OPTICAL_LW … #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SEEPROM … #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SW_OPTICAL … #define MPI_FCPORTPAGE10_FLAGS_MODDEF_LX_IEEE_OPT_LW … #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SX_IEEE_OPT_SW … #define MPI_FCPORTPAGE10_FLAGS_CC_BASE_OK … #define MPI_FCPORTPAGE10_FLAGS_CC_EXT_OK … /**************************************************************************** * FC Device Config Pages ****************************************************************************/ pFCDevicePage0_t; #define MPI_FC_DEVICE_PAGE0_PAGEVERSION … #define MPI_FC_DEVICE_PAGE0_FLAGS_TARGETID_BUS_VALID … #define MPI_FC_DEVICE_PAGE0_FLAGS_PLOGI_INVALID … #define MPI_FC_DEVICE_PAGE0_FLAGS_PRLI_INVALID … #define MPI_FC_DEVICE_PAGE0_PROT_IP … #define MPI_FC_DEVICE_PAGE0_PROT_FCP_TARGET … #define MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR … #define MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY … #define MPI_FC_DEVICE_PAGE0_PGAD_PORT_MASK … #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_MASK … #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_NEXT_DID … #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_BUS_TID … #define MPI_FC_DEVICE_PAGE0_PGAD_DID_MASK … #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_MASK … #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_SHIFT … #define MPI_FC_DEVICE_PAGE0_PGAD_TID_MASK … #define MPI_FC_DEVICE_PAGE0_HARD_ALPA_UNKNOWN … /**************************************************************************** * RAID Volume Config Pages ****************************************************************************/ pRaidVol0PhysDisk_t; #define MPI_RAIDVOL0_PHYSDISK_PRIMARY … #define MPI_RAIDVOL0_PHYSDISK_SECONDARY … pRaidVol0Status_t; /* RAID Volume Page 0 VolumeStatus defines */ #define MPI_RAIDVOL0_STATUS_FLAG_ENABLED … #define MPI_RAIDVOL0_STATUS_FLAG_QUIESCED … #define MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS … #define MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE … #define MPI_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL … #define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL … #define MPI_RAIDVOL0_STATUS_STATE_DEGRADED … #define MPI_RAIDVOL0_STATUS_STATE_FAILED … #define MPI_RAIDVOL0_STATUS_STATE_MISSING … pRaidVol0Settings; /* RAID Volume Page 0 VolumeSettings defines */ #define MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE … #define MPI_RAIDVOL0_SETTING_OFFLINE_ON_SMART … #define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE … #define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC … #define MPI_RAIDVOL0_SETTING_FAST_DATA_SCRUBBING_0102 … #define MPI_RAIDVOL0_SETTING_MASK_METADATA_SIZE … #define MPI_RAIDVOL0_SETTING_64MB_METADATA_SIZE … #define MPI_RAIDVOL0_SETTING_512MB_METADATA_SIZE … #define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX … #define MPI_RAIDVOL0_SETTING_USE_DEFAULTS … /* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */ #define MPI_RAID_HOT_SPARE_POOL_0 … #define MPI_RAID_HOT_SPARE_POOL_1 … #define MPI_RAID_HOT_SPARE_POOL_2 … #define MPI_RAID_HOT_SPARE_POOL_3 … #define MPI_RAID_HOT_SPARE_POOL_4 … #define MPI_RAID_HOT_SPARE_POOL_5 … #define MPI_RAID_HOT_SPARE_POOL_6 … #define MPI_RAID_HOT_SPARE_POOL_7 … pRaidVolumePage0_t; #define MPI_RAIDVOLPAGE0_PAGEVERSION … /* values for RAID Volume Page 0 InactiveStatus field */ #define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE … #define MPI_RAIDVOLPAGE0_STALE_METADATA_INACTIVE … #define MPI_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE … #define MPI_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE … #define MPI_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE … #define MPI_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE … #define MPI_RAIDVOLPAGE0_PREVIOUSLY_DELETED … pRaidVolumePage1_t; #define MPI_RAIDVOLPAGE1_PAGEVERSION … /**************************************************************************** * RAID Physical Disk Config Pages ****************************************************************************/ pRaidPhysDisk0ErrorData_t; pRaidPhysDisk0InquiryData; pRaidPhysDiskSettings_t; pRaidPhysDiskStatus_t; /* RAID Physical Disk PhysDiskStatus flags */ #define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC … #define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED … #define MPI_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME … #define MPI_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS … #define MPI_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS … #define MPI_PHYSDISK0_STATUS_ONLINE … #define MPI_PHYSDISK0_STATUS_MISSING … #define MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE … #define MPI_PHYSDISK0_STATUS_FAILED … #define MPI_PHYSDISK0_STATUS_INITIALIZING … #define MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED … #define MPI_PHYSDISK0_STATUS_FAILED_REQUESTED … #define MPI_PHYSDISK0_STATUS_OTHER_OFFLINE … pRaidPhysDiskPage0_t; #define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION … pRaidPhysDisk1Path_t; /* RAID Physical Disk Page 1 Flags field defines */ #define MPI_RAID_PHYSDISK1_FLAG_BROKEN … #define MPI_RAID_PHYSDISK1_FLAG_INVALID … pRaidPhysDiskPage1_t; #define MPI_RAIDPHYSDISKPAGE1_PAGEVERSION … /**************************************************************************** * LAN Config Pages ****************************************************************************/ pLANPage0_t; #define MPI_LAN_PAGE0_PAGEVERSION … #define MPI_LAN_PAGE0_RETURN_LOOPBACK … #define MPI_LAN_PAGE0_SUPPRESS_LOOPBACK … #define MPI_LAN_PAGE0_LOOPBACK_MASK … pLANPage1_t; #define MPI_LAN_PAGE1_PAGEVERSION … #define MPI_LAN_PAGE1_DEV_STATE_RESET … #define MPI_LAN_PAGE1_DEV_STATE_OPERATIONAL … /**************************************************************************** * Inband Config Pages ****************************************************************************/ pInbandPage0_t; #define MPI_INBAND_PAGEVERSION … /**************************************************************************** * SAS IO Unit Config Pages ****************************************************************************/ pSasIOUnit0PhyData; pSasIOUnitPage0_t; #define MPI_SASIOUNITPAGE0_PAGEVERSION … /* values for SAS IO Unit Page 0 PortFlags */ #define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS … #define MPI_SAS_IOUNIT0_PORT_FLAGS_0_TARGET_IOC_NUM … #define MPI_SAS_IOUNIT0_PORT_FLAGS_1_TARGET_IOC_NUM … #define MPI_SAS_IOUNIT0_PORT_FLAGS_AUTO_PORT_CONFIG … /* values for SAS IO Unit Page 0 PhyFlags */ #define MPI_SAS_IOUNIT0_PHY_FLAGS_PHY_DISABLED … #define MPI_SAS_IOUNIT0_PHY_FLAGS_TX_INVERT … #define MPI_SAS_IOUNIT0_PHY_FLAGS_RX_INVERT … /* values for SAS IO Unit Page 0 NegotiatedLinkRate */ #define MPI_SAS_IOUNIT0_RATE_UNKNOWN … #define MPI_SAS_IOUNIT0_RATE_PHY_DISABLED … #define MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION … #define MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE … #define MPI_SAS_IOUNIT0_RATE_1_5 … #define MPI_SAS_IOUNIT0_RATE_3_0 … #define MPI_SAS_IOUNIT0_RATE_6_0 … /* see mpi_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */ /* values for SAS IO Unit Page 0 DiscoveryStatus */ #define MPI_SAS_IOUNIT0_DS_LOOP_DETECTED … #define MPI_SAS_IOUNIT0_DS_UNADDRESSABLE_DEVICE … #define MPI_SAS_IOUNIT0_DS_MULTIPLE_PORTS … #define MPI_SAS_IOUNIT0_DS_EXPANDER_ERR … #define MPI_SAS_IOUNIT0_DS_SMP_TIMEOUT … #define MPI_SAS_IOUNIT0_DS_OUT_ROUTE_ENTRIES … #define MPI_SAS_IOUNIT0_DS_INDEX_NOT_EXIST … #define MPI_SAS_IOUNIT0_DS_SMP_FUNCTION_FAILED … #define MPI_SAS_IOUNIT0_DS_SMP_CRC_ERROR … #define MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK … #define MPI_SAS_IOUNIT0_DS_TABLE_LINK … #define MPI_SAS_IOUNIT0_DS_UNSUPPORTED_DEVICE … #define MPI_SAS_IOUNIT0_DS_MAX_SATA_TARGETS … #define MPI_SAS_IOUNIT0_DS_MULTI_PORT_DOMAIN … pSasIOUnit1PhyData; /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_SAS_IOUNIT1_PHY_MAX #define MPI_SAS_IOUNIT1_PHY_MAX … #endif pSasIOUnitPage1_t; #define MPI_SASIOUNITPAGE1_PAGEVERSION … /* values for SAS IO Unit Page 1 ControlFlags */ #define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST … #define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX … #define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX … #define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE … #define MPI_SAS_IOUNIT1_CONTROL_DISABLE_SAS_HASH … #define MPI_SAS_IOUNIT1_CONTROL_MASK_DEV_SUPPORT … #define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT … #define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH … #define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT … #define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT … #define MPI_SAS_IOUNIT1_CONTROL_POSTPONE_SATA_INIT … #define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED … #define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED … #define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED … #define MPI_SAS_IOUNIT1_CONTROL_SATA_FUA_REQUIRED … #define MPI_SAS_IOUNIT1_CONTROL_PHY_ENABLE_ORDER_HIGH … #define MPI_SAS_IOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL … #define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY … #define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION … /* values for SAS IO Unit Page 1 AdditionalControlFlags */ #define MPI_SAS_IOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL … #define MPI_SAS_IOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION … #define MPI_SAS_IOUNIT1_ACONTROL_HIDE_NONZERO_ATTACHED_PHY_IDENT … #define MPI_SAS_IOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET … #define MPI_SAS_IOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET … #define MPI_SAS_IOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET … #define MPI_SAS_IOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET … #define MPI_SAS_IOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE … /* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */ #define MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK … #define MPI_SAS_IOUNIT1_REPORT_MISSING_UNIT_16 … /* values for SAS IO Unit Page 1 PortFlags */ #define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM … #define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM … #define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG … /* values for SAS IO Unit Page 0 PhyFlags */ #define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE … #define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT … #define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT … /* values for SAS IO Unit Page 0 MaxMinLinkRate */ #define MPI_SAS_IOUNIT1_MAX_RATE_MASK … #define MPI_SAS_IOUNIT1_MAX_RATE_1_5 … #define MPI_SAS_IOUNIT1_MAX_RATE_3_0 … #define MPI_SAS_IOUNIT1_MIN_RATE_MASK … #define MPI_SAS_IOUNIT1_MIN_RATE_1_5 … #define MPI_SAS_IOUNIT1_MIN_RATE_3_0 … /* see mpi_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ pSasIOUnitPage2_t; #define MPI_SASIOUNITPAGE2_PAGEVERSION … /* values for SAS IO Unit Page 2 Status field */ #define MPI_SAS_IOUNIT2_STATUS_DEVICE_LIMIT_EXCEEDED … #define MPI_SAS_IOUNIT2_STATUS_ENCLOSURE_DEVICES_UNMAPPED … #define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS … #define MPI_SAS_IOUNIT2_STATUS_FULL_PERSISTENT_MAPPINGS … /* values for SAS IO Unit Page 2 Flags field */ #define MPI_SAS_IOUNIT2_FLAGS_DISABLE_PERSISTENT_MAPPINGS … /* Physical Mapping Modes */ #define MPI_SAS_IOUNIT2_FLAGS_MASK_PHYS_MAP_MODE … #define MPI_SAS_IOUNIT2_FLAGS_SHIFT_PHYS_MAP_MODE … #define MPI_SAS_IOUNIT2_FLAGS_NO_PHYS_MAP … #define MPI_SAS_IOUNIT2_FLAGS_DIRECT_ATTACH_PHYS_MAP … #define MPI_SAS_IOUNIT2_FLAGS_ENCLOSURE_SLOT_PHYS_MAP … #define MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP … #define MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT … #define MPI_SAS_IOUNIT2_FLAGS_DA_STARTING_SLOT … pSasIOUnitPage3_t; #define MPI_SASIOUNITPAGE3_PAGEVERSION … /**************************************************************************** * SAS Expander Config Pages ****************************************************************************/ pSasExpanderPage0_t; #define MPI_SASEXPANDER0_PAGEVERSION … /* values for SAS Expander Page 0 DiscoveryStatus field */ #define MPI_SAS_EXPANDER0_DS_LOOP_DETECTED … #define MPI_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE … #define MPI_SAS_EXPANDER0_DS_MULTIPLE_PORTS … #define MPI_SAS_EXPANDER0_DS_EXPANDER_ERR … #define MPI_SAS_EXPANDER0_DS_SMP_TIMEOUT … #define MPI_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES … #define MPI_SAS_EXPANDER0_DS_INDEX_NOT_EXIST … #define MPI_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED … #define MPI_SAS_EXPANDER0_DS_SMP_CRC_ERROR … #define MPI_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK … #define MPI_SAS_EXPANDER0_DS_TABLE_LINK … #define MPI_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE … /* values for SAS Expander Page 0 Flags field */ #define MPI_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE … #define MPI_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG … #define MPI_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS … pSasExpanderPage1_t; #define MPI_SASEXPANDER1_PAGEVERSION … /* use MPI_SAS_PHY0_PRATE_ defines for ProgrammedLinkRate */ /* use MPI_SAS_PHY0_HWRATE_ defines for HwLinkRate */ /* use MPI_SAS_PHY0_PHYINFO_ defines for PhyInfo */ /* see mpi_sas.h for values for SAS Expander Page 1 AttachedDeviceInfo values */ /* values for SAS Expander Page 1 DiscoveryInfo field */ #define MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED … #define MPI_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE … #define MPI_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES … /* values for SAS Expander Page 1 NegotiatedLinkRate field */ #define MPI_SAS_EXPANDER1_NEG_RATE_UNKNOWN … #define MPI_SAS_EXPANDER1_NEG_RATE_PHY_DISABLED … #define MPI_SAS_EXPANDER1_NEG_RATE_FAILED_NEGOTIATION … #define MPI_SAS_EXPANDER1_NEG_RATE_SATA_OOB_COMPLETE … #define MPI_SAS_EXPANDER1_NEG_RATE_1_5 … #define MPI_SAS_EXPANDER1_NEG_RATE_3_0 … /**************************************************************************** * SAS Device Config Pages ****************************************************************************/ pSasDevicePage0_t; #define MPI_SASDEVICE0_PAGEVERSION … /* values for SAS Device Page 0 AccessStatus field */ #define MPI_SAS_DEVICE0_ASTATUS_NO_ERRORS … #define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED … #define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED … #define MPI_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT … #define MPI_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION … /* specific values for SATA Init failures */ #define MPI_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN … #define MPI_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT … #define MPI_SAS_DEVICE0_ASTATUS_SIF_DIAG … #define MPI_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION … #define MPI_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER … #define MPI_SAS_DEVICE0_ASTATUS_SIF_PIO_SN … #define MPI_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN … #define MPI_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN … #define MPI_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION … #define MPI_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE … #define MPI_SAS_DEVICE0_ASTATUS_SIF_MAX … /* values for SAS Device Page 0 Flags field */ #define MPI_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY … #define MPI_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE … #define MPI_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE … #define MPI_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED … #define MPI_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED … #define MPI_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED … #define MPI_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED … #define MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH … #define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT … #define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED … #define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT … /* see mpi_sas.h for values for SAS Device Page 0 DeviceInfo values */ pSasDevicePage1_t; #define MPI_SASDEVICE1_PAGEVERSION … pSasDevicePage2_t; #define MPI_SASDEVICE2_PAGEVERSION … /* defines for SAS Device Page 2 EnclosureMapping field */ #define MPI_SASDEVICE2_ENC_MAP_MASK_MISSING_COUNT … #define MPI_SASDEVICE2_ENC_MAP_SHIFT_MISSING_COUNT … #define MPI_SASDEVICE2_ENC_MAP_MASK_NUM_SLOTS … #define MPI_SASDEVICE2_ENC_MAP_SHIFT_NUM_SLOTS … #define MPI_SASDEVICE2_ENC_MAP_MASK_START_INDEX … #define MPI_SASDEVICE2_ENC_MAP_SHIFT_START_INDEX … /**************************************************************************** * SAS PHY Config Pages ****************************************************************************/ pSasPhyPage0_t; #define MPI_SASPHY0_PAGEVERSION … /* values for SAS PHY Page 0 ProgrammedLinkRate field */ #define MPI_SAS_PHY0_PRATE_MAX_RATE_MASK … #define MPI_SAS_PHY0_PRATE_MAX_RATE_NOT_PROGRAMMABLE … #define MPI_SAS_PHY0_PRATE_MAX_RATE_1_5 … #define MPI_SAS_PHY0_PRATE_MAX_RATE_3_0 … #define MPI_SAS_PHY0_PRATE_MIN_RATE_MASK … #define MPI_SAS_PHY0_PRATE_MIN_RATE_NOT_PROGRAMMABLE … #define MPI_SAS_PHY0_PRATE_MIN_RATE_1_5 … #define MPI_SAS_PHY0_PRATE_MIN_RATE_3_0 … /* values for SAS PHY Page 0 HwLinkRate field */ #define MPI_SAS_PHY0_HWRATE_MAX_RATE_MASK … #define MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5 … #define MPI_SAS_PHY0_HWRATE_MAX_RATE_3_0 … #define MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK … #define MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5 … #define MPI_SAS_PHY0_HWRATE_MIN_RATE_3_0 … /* values for SAS PHY Page 0 Flags field */ #define MPI_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC … /* values for SAS PHY Page 0 PhyInfo field */ #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_ACTIVE … #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_SELECTOR … #define MPI_SAS_PHY0_PHYINFO_VIRTUAL_PHY … #define MPI_SAS_PHY0_PHYINFO_MASK_PARTIAL_PATHWAY_TIME … #define MPI_SAS_PHY0_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME … #define MPI_SAS_PHY0_PHYINFO_MASK_ROUTING_ATTRIBUTE … #define MPI_SAS_PHY0_PHYINFO_DIRECT_ROUTING … #define MPI_SAS_PHY0_PHYINFO_SUBTRACTIVE_ROUTING … #define MPI_SAS_PHY0_PHYINFO_TABLE_ROUTING … #define MPI_SAS_PHY0_PHYINFO_MASK_LINK_RATE … #define MPI_SAS_PHY0_PHYINFO_UNKNOWN_LINK_RATE … #define MPI_SAS_PHY0_PHYINFO_PHY_DISABLED … #define MPI_SAS_PHY0_PHYINFO_NEGOTIATION_FAILED … #define MPI_SAS_PHY0_PHYINFO_SATA_OOB_COMPLETE … #define MPI_SAS_PHY0_PHYINFO_RATE_1_5 … #define MPI_SAS_PHY0_PHYINFO_RATE_3_0 … pSasPhyPage1_t; #define MPI_SASPHY1_PAGEVERSION … /**************************************************************************** * SAS Enclosure Config Pages ****************************************************************************/ pSasEnclosurePage0_t; #define MPI_SASENCLOSURE0_PAGEVERSION … /* values for SAS Enclosure Page 0 Flags field */ #define MPI_SAS_ENCLS0_FLAGS_SEP_BUS_ID_VALID … #define MPI_SAS_ENCLS0_FLAGS_START_BUS_ID_VALID … #define MPI_SAS_ENCLS0_FLAGS_MNG_MASK … #define MPI_SAS_ENCLS0_FLAGS_MNG_UNKNOWN … #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_SES … #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO … #define MPI_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO … #define MPI_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE … #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO … /**************************************************************************** * Log Config Pages ****************************************************************************/ /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check NumLogEntries at runtime. */ #ifndef MPI_LOG_0_NUM_LOG_ENTRIES #define MPI_LOG_0_NUM_LOG_ENTRIES … #endif #define MPI_LOG_0_LOG_DATA_LENGTH … pMpiLog0Entry_t; /* values for Log Page 0 LogEntry LogEntryQualifier field */ #define MPI_LOG_0_ENTRY_QUAL_ENTRY_UNUSED … #define MPI_LOG_0_ENTRY_QUAL_POWER_ON_RESET … pLogPage0_t; #define MPI_LOG_0_PAGEVERSION … #endif
Codebase Browser
linux