linux/drivers/comedi/drivers/8255.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * comedi/drivers/8255.c
 * Driver for 8255
 *
 * COMEDI - Linux Control and Measurement Device Interface
 * Copyright (C) 1998 David A. Schleef <[email protected]>
 */

/*
 * Driver: 8255
 * Description: generic 8255 support
 * Devices: [standard] 8255 (8255)
 * Author: ds
 * Status: works
 * Updated: Fri,  7 Jun 2002 12:56:45 -0700
 *
 * The classic in digital I/O.  The 8255 appears in Comedi as a single
 * digital I/O subdevice with 24 channels.  The channel 0 corresponds
 * to the 8255's port A, bit 0; channel 23 corresponds to port C, bit
 * 7.  Direction configuration is done in blocks, with channels 0-7,
 * 8-15, 16-19, and 20-23 making up the 4 blocks.  The only 8255 mode
 * supported is mode 0.
 *
 * You should enable compilation this driver if you plan to use a board
 * that has an 8255 chip.  For multifunction boards, the main driver will
 * configure the 8255 subdevice automatically.
 *
 * This driver also works independently with ISA and PCI cards that
 * directly map the 8255 registers to I/O ports, including cards with
 * multiple 8255 chips.  To configure the driver for such a card, the
 * option list should be a list of the I/O port bases for each of the
 * 8255 chips.  For example,
 *
 *   comedi_config /dev/comedi0 8255 0x200,0x204,0x208,0x20c
 *
 * Note that most PCI 8255 boards do NOT work with this driver, and
 * need a separate driver as a wrapper.  For those that do work, the
 * I/O port base address can be found in the output of 'lspci -v'.
 */

#include <linux/module.h>
#include <linux/comedi/comedidev.h>
#include <linux/comedi/comedi_8255.h>

static int dev_8255_attach(struct comedi_device *dev,
			   struct comedi_devconfig *it)
{ … }

static void dev_8255_detach(struct comedi_device *dev)
{ … }

static struct comedi_driver dev_8255_driver = …;
module_comedi_driver(…);

MODULE_AUTHOR(…) …;
MODULE_DESCRIPTION(…) …;
MODULE_LICENSE(…) …;