/* SPDX-License-Identifier: GPL-2.0 */ /* * Written by Mark Hemment, 1996 ([email protected]). * * (C) SGI 2006, Christoph Lameter * Cleaned up and restructured to ease the addition of alternative * implementations of SLAB allocators. * (C) Linux Foundation 2008-2013 * Unified interface for all slab allocators */ #ifndef _LINUX_SLAB_H #define _LINUX_SLAB_H #include <linux/cache.h> #include <linux/gfp.h> #include <linux/overflow.h> #include <linux/types.h> #include <linux/workqueue.h> #include <linux/percpu-refcount.h> #include <linux/cleanup.h> #include <linux/hash.h> enum _slab_flag_bits { … }; #define __SLAB_FLAG_BIT(nr) … #define __SLAB_FLAG_UNUSED … /* * Flags to pass to kmem_cache_create(). * The ones marked DEBUG need CONFIG_SLUB_DEBUG enabled, otherwise are no-op */ /* DEBUG: Perform (expensive) checks on alloc/free */ #define SLAB_CONSISTENCY_CHECKS … /* DEBUG: Red zone objs in a cache */ #define SLAB_RED_ZONE … /* DEBUG: Poison objects */ #define SLAB_POISON … /* Indicate a kmalloc slab */ #define SLAB_KMALLOC … /* Align objs on cache lines */ #define SLAB_HWCACHE_ALIGN … /* Use GFP_DMA memory */ #define SLAB_CACHE_DMA … /* Use GFP_DMA32 memory */ #define SLAB_CACHE_DMA32 … /* DEBUG: Store the last owner for bug hunting */ #define SLAB_STORE_USER … /* Panic if kmem_cache_create() fails */ #define SLAB_PANIC … /* * SLAB_TYPESAFE_BY_RCU - **WARNING** READ THIS! * * This delays freeing the SLAB page by a grace period, it does _NOT_ * delay object freeing. This means that if you do kmem_cache_free() * that memory location is free to be reused at any time. Thus it may * be possible to see another object there in the same RCU grace period. * * This feature only ensures the memory location backing the object * stays valid, the trick to using this is relying on an independent * object validation pass. Something like: * * begin: * rcu_read_lock(); * obj = lockless_lookup(key); * if (obj) { * if (!try_get_ref(obj)) // might fail for free objects * rcu_read_unlock(); * goto begin; * * if (obj->key != key) { // not the object we expected * put_ref(obj); * rcu_read_unlock(); * goto begin; * } * } * rcu_read_unlock(); * * This is useful if we need to approach a kernel structure obliquely, * from its address obtained without the usual locking. We can lock * the structure to stabilize it and check it's still at the given address, * only if we can be sure that the memory has not been meanwhile reused * for some other kind of object (which our subsystem's lock might corrupt). * * rcu_read_lock before reading the address, then rcu_read_unlock after * taking the spinlock within the structure expected at that address. * * Note that it is not possible to acquire a lock within a structure * allocated with SLAB_TYPESAFE_BY_RCU without first acquiring a reference * as described above. The reason is that SLAB_TYPESAFE_BY_RCU pages * are not zeroed before being given to the slab, which means that any * locks must be initialized after each and every kmem_struct_alloc(). * Alternatively, make the ctor passed to kmem_cache_create() initialize * the locks at page-allocation time, as is done in __i915_request_ctor(), * sighand_ctor(), and anon_vma_ctor(). Such a ctor permits readers * to safely acquire those ctor-initialized locks under rcu_read_lock() * protection. * * Note that SLAB_TYPESAFE_BY_RCU was originally named SLAB_DESTROY_BY_RCU. */ /* Defer freeing slabs to RCU */ #define SLAB_TYPESAFE_BY_RCU … /* Trace allocations and frees */ #define SLAB_TRACE … /* Flag to prevent checks on free */ #ifdef CONFIG_DEBUG_OBJECTS #define SLAB_DEBUG_OBJECTS … #else #define SLAB_DEBUG_OBJECTS … #endif /* Avoid kmemleak tracing */ #define SLAB_NOLEAKTRACE … /* * Prevent merging with compatible kmem caches. This flag should be used * cautiously. Valid use cases: * * - caches created for self-tests (e.g. kunit) * - general caches created and used by a subsystem, only when a * (subsystem-specific) debug option is enabled * - performance critical caches, should be very rare and consulted with slab * maintainers, and not used together with CONFIG_SLUB_TINY */ #define SLAB_NO_MERGE … /* Fault injection mark */ #ifdef CONFIG_FAILSLAB #define SLAB_FAILSLAB … #else #define SLAB_FAILSLAB … #endif /* Account to memcg */ #ifdef CONFIG_MEMCG #define SLAB_ACCOUNT … #else #define SLAB_ACCOUNT … #endif #ifdef CONFIG_KASAN_GENERIC #define SLAB_KASAN … #else #define SLAB_KASAN … #endif /* * Ignore user specified debugging flags. * Intended for caches created for self-tests so they have only flags * specified in the code and other flags are ignored. */ #define SLAB_NO_USER_FLAGS … #ifdef CONFIG_KFENCE #define SLAB_SKIP_KFENCE … #else #define SLAB_SKIP_KFENCE … #endif /* The following flags affect the page allocator grouping pages by mobility */ /* Objects are reclaimable */ #ifndef CONFIG_SLUB_TINY #define SLAB_RECLAIM_ACCOUNT … #else #define SLAB_RECLAIM_ACCOUNT … #endif #define SLAB_TEMPORARY … /* Slab created using create_boot_cache */ #ifdef CONFIG_SLAB_OBJ_EXT #define SLAB_NO_OBJ_EXT … #else #define SLAB_NO_OBJ_EXT … #endif /* * freeptr_t represents a SLUB freelist pointer, which might be encoded * and not dereferenceable if CONFIG_SLAB_FREELIST_HARDENED is enabled. */ freeptr_t; /* * ZERO_SIZE_PTR will be returned for zero sized kmalloc requests. * * Dereferencing ZERO_SIZE_PTR will lead to a distinct access fault. * * ZERO_SIZE_PTR can be passed to kfree though in the same way that NULL can. * Both make kfree a no-op. */ #define ZERO_SIZE_PTR … #define ZERO_OR_NULL_PTR(x) … #include <linux/kasan.h> struct list_lru; struct mem_cgroup; /* * struct kmem_cache related prototypes */ bool slab_is_available(void); /** * struct kmem_cache_args - Less common arguments for kmem_cache_create() * * Any uninitialized fields of the structure are interpreted as unused. The * exception is @freeptr_offset where %0 is a valid value, so * @use_freeptr_offset must be also set to %true in order to interpret the field * as used. For @useroffset %0 is also valid, but only with non-%0 * @usersize. * * When %NULL args is passed to kmem_cache_create(), it is equivalent to all * fields unused. */ struct kmem_cache_args { … }; struct kmem_cache *__kmem_cache_create_args(const char *name, unsigned int object_size, struct kmem_cache_args *args, slab_flags_t flags); static inline struct kmem_cache * __kmem_cache_create(const char *name, unsigned int size, unsigned int align, slab_flags_t flags, void (*ctor)(void *)) { … } /** * kmem_cache_create_usercopy - Create a kmem cache with a region suitable * for copying to userspace. * @name: A string which is used in /proc/slabinfo to identify this cache. * @size: The size of objects to be created in this cache. * @align: The required alignment for the objects. * @flags: SLAB flags * @useroffset: Usercopy region offset * @usersize: Usercopy region size * @ctor: A constructor for the objects, or %NULL. * * This is a legacy wrapper, new code should use either KMEM_CACHE_USERCOPY() * if whitelisting a single field is sufficient, or kmem_cache_create() with * the necessary parameters passed via the args parameter (see * &struct kmem_cache_args) * * Return: a pointer to the cache on success, NULL on failure. */ static inline struct kmem_cache * kmem_cache_create_usercopy(const char *name, unsigned int size, unsigned int align, slab_flags_t flags, unsigned int useroffset, unsigned int usersize, void (*ctor)(void *)) { … } /* If NULL is passed for @args, use this variant with default arguments. */ static inline struct kmem_cache * __kmem_cache_default_args(const char *name, unsigned int size, struct kmem_cache_args *args, slab_flags_t flags) { … } /** * kmem_cache_create - Create a kmem cache. * @__name: A string which is used in /proc/slabinfo to identify this cache. * @__object_size: The size of objects to be created in this cache. * @__args: Optional arguments, see &struct kmem_cache_args. Passing %NULL * means defaults will be used for all the arguments. * * This is currently implemented as a macro using ``_Generic()`` to call * either the new variant of the function, or a legacy one. * * The new variant has 4 parameters: * ``kmem_cache_create(name, object_size, args, flags)`` * * See __kmem_cache_create_args() which implements this. * * The legacy variant has 5 parameters: * ``kmem_cache_create(name, object_size, align, flags, ctor)`` * * The align and ctor parameters map to the respective fields of * &struct kmem_cache_args * * Context: Cannot be called within a interrupt, but can be interrupted. * * Return: a pointer to the cache on success, NULL on failure. */ #define kmem_cache_create(__name, __object_size, __args, ...) … void kmem_cache_destroy(struct kmem_cache *s); int kmem_cache_shrink(struct kmem_cache *s); /* * Please use this macro to create slab caches. Simply specify the * name of the structure and maybe some flags that are listed above. * * The alignment of the struct determines object alignment. If you * f.e. add ____cacheline_aligned_in_smp to the struct declaration * then the objects will be properly aligned in SMP configurations. */ #define KMEM_CACHE(__struct, __flags) … /* * To whitelist a single field for copying to/from usercopy, use this * macro instead for KMEM_CACHE() above. */ #define KMEM_CACHE_USERCOPY(__struct, __flags, __field) … /* * Common kmalloc functions provided by all allocators */ void * __must_check krealloc_noprof(const void *objp, size_t new_size, gfp_t flags) __realloc_size(2); #define krealloc(...) … void kfree(const void *objp); void kfree_sensitive(const void *objp); size_t __ksize(const void *objp); DEFINE_FREE(…) /** * ksize - Report actual allocation size of associated object * * @objp: Pointer returned from a prior kmalloc()-family allocation. * * This should not be used for writing beyond the originally requested * allocation size. Either use krealloc() or round up the allocation size * with kmalloc_size_roundup() prior to allocation. If this is used to * access beyond the originally requested allocation size, UBSAN_BOUNDS * and/or FORTIFY_SOURCE may trip, since they only know about the * originally allocated size via the __alloc_size attribute. */ size_t ksize(const void *objp); #ifdef CONFIG_PRINTK bool kmem_dump_obj(void *object); #else static inline bool kmem_dump_obj(void *object) { return false; } #endif /* * Some archs want to perform DMA into kmalloc caches and need a guaranteed * alignment larger than the alignment of a 64-bit integer. * Setting ARCH_DMA_MINALIGN in arch headers allows that. */ #ifdef ARCH_HAS_DMA_MINALIGN #if ARCH_DMA_MINALIGN > 8 && !defined(ARCH_KMALLOC_MINALIGN) #define ARCH_KMALLOC_MINALIGN … #endif #endif #ifndef ARCH_KMALLOC_MINALIGN #define ARCH_KMALLOC_MINALIGN … #elif ARCH_KMALLOC_MINALIGN > 8 #define KMALLOC_MIN_SIZE … #define KMALLOC_SHIFT_LOW … #endif /* * Setting ARCH_SLAB_MINALIGN in arch headers allows a different alignment. * Intended for arches that get misalignment faults even for 64 bit integer * aligned buffers. */ #ifndef ARCH_SLAB_MINALIGN #define ARCH_SLAB_MINALIGN … #endif /* * Arches can define this function if they want to decide the minimum slab * alignment at runtime. The value returned by the function must be a power * of two and >= ARCH_SLAB_MINALIGN. */ #ifndef arch_slab_minalign static inline unsigned int arch_slab_minalign(void) { … } #endif /* * kmem_cache_alloc and friends return pointers aligned to ARCH_SLAB_MINALIGN. * kmalloc and friends return pointers aligned to both ARCH_KMALLOC_MINALIGN * and ARCH_SLAB_MINALIGN, but here we only assume the former alignment. */ #define __assume_kmalloc_alignment … #define __assume_slab_alignment … #define __assume_page_alignment … /* * Kmalloc array related definitions */ /* * SLUB directly allocates requests fitting in to an order-1 page * (PAGE_SIZE*2). Larger requests are passed to the page allocator. */ #define KMALLOC_SHIFT_HIGH … #define KMALLOC_SHIFT_MAX … #ifndef KMALLOC_SHIFT_LOW #define KMALLOC_SHIFT_LOW … #endif /* Maximum allocatable size */ #define KMALLOC_MAX_SIZE … /* Maximum size for which we actually use a slab cache */ #define KMALLOC_MAX_CACHE_SIZE … /* Maximum order allocatable via the slab allocator */ #define KMALLOC_MAX_ORDER … /* * Kmalloc subsystem. */ #ifndef KMALLOC_MIN_SIZE #define KMALLOC_MIN_SIZE … #endif /* * This restriction comes from byte sized index implementation. * Page size is normally 2^12 bytes and, in this case, if we want to use * byte sized index which can represent 2^8 entries, the size of the object * should be equal or greater to 2^12 / 2^8 = 2^4 = 16. * If minimum size of kmalloc is less than 16, we use it as minimum object * size and give up to use byte sized index. */ #define SLAB_OBJ_MIN_SIZE … #ifdef CONFIG_RANDOM_KMALLOC_CACHES #define RANDOM_KMALLOC_CACHES_NR … #else #define RANDOM_KMALLOC_CACHES_NR … #endif /* * Whenever changing this, take care of that kmalloc_type() and * create_kmalloc_caches() still work as intended. * * KMALLOC_NORMAL can contain only unaccounted objects whereas KMALLOC_CGROUP * is for accounted but unreclaimable and non-dma objects. All the other * kmem caches can have both accounted and unaccounted objects. */ enum kmalloc_cache_type { … }; kmem_buckets; extern kmem_buckets kmalloc_caches[NR_KMALLOC_TYPES]; /* * Define gfp bits that should not be set for KMALLOC_NORMAL. */ #define KMALLOC_NOT_NORMAL_BITS … extern unsigned long random_kmalloc_seed; static __always_inline enum kmalloc_cache_type kmalloc_type(gfp_t flags, unsigned long caller) { … } /* * Figure out which kmalloc slab an allocation of a certain size * belongs to. * 0 = zero alloc * 1 = 65 .. 96 bytes * 2 = 129 .. 192 bytes * n = 2^(n-1)+1 .. 2^n * * Note: __kmalloc_index() is compile-time optimized, and not runtime optimized; * typical usage is via kmalloc_index() and therefore evaluated at compile-time. * Callers where !size_is_constant should only be test modules, where runtime * overheads of __kmalloc_index() can be tolerated. Also see kmalloc_slab(). */ static __always_inline unsigned int __kmalloc_index(size_t size, bool size_is_constant) { … } static_assert(…); #define kmalloc_index(s) … #include <linux/alloc_tag.h> /** * kmem_cache_alloc - Allocate an object * @cachep: The cache to allocate from. * @flags: See kmalloc(). * * Allocate an object from this cache. * See kmem_cache_zalloc() for a shortcut of adding __GFP_ZERO to flags. * * Return: pointer to the new object or %NULL in case of error */ void *kmem_cache_alloc_noprof(struct kmem_cache *cachep, gfp_t flags) __assume_slab_alignment __malloc; #define kmem_cache_alloc(...) … void *kmem_cache_alloc_lru_noprof(struct kmem_cache *s, struct list_lru *lru, gfp_t gfpflags) __assume_slab_alignment __malloc; #define kmem_cache_alloc_lru(...) … /** * kmem_cache_charge - memcg charge an already allocated slab memory * @objp: address of the slab object to memcg charge * @gfpflags: describe the allocation context * * kmem_cache_charge allows charging a slab object to the current memcg, * primarily in cases where charging at allocation time might not be possible * because the target memcg is not known (i.e. softirq context) * * The objp should be pointer returned by the slab allocator functions like * kmalloc (with __GFP_ACCOUNT in flags) or kmem_cache_alloc. The memcg charge * behavior can be controlled through gfpflags parameter, which affects how the * necessary internal metadata can be allocated. Including __GFP_NOFAIL denotes * that overcharging is requested instead of failure, but is not applied for the * internal metadata allocation. * * There are several cases where it will return true even if the charging was * not done: * More specifically: * * 1. For !CONFIG_MEMCG or cgroup_disable=memory systems. * 2. Already charged slab objects. * 3. For slab objects from KMALLOC_NORMAL caches - allocated by kmalloc() * without __GFP_ACCOUNT * 4. Allocating internal metadata has failed * * Return: true if charge was successful otherwise false. */ bool kmem_cache_charge(void *objp, gfp_t gfpflags); void kmem_cache_free(struct kmem_cache *s, void *objp); kmem_buckets *kmem_buckets_create(const char *name, slab_flags_t flags, unsigned int useroffset, unsigned int usersize, void (*ctor)(void *)); /* * Bulk allocation and freeing operations. These are accelerated in an * allocator specific way to avoid taking locks repeatedly or building * metadata structures unnecessarily. * * Note that interrupts must be enabled when calling these functions. */ void kmem_cache_free_bulk(struct kmem_cache *s, size_t size, void **p); int kmem_cache_alloc_bulk_noprof(struct kmem_cache *s, gfp_t flags, size_t size, void **p); #define kmem_cache_alloc_bulk(...) … static __always_inline void kfree_bulk(size_t size, void **p) { … } void *kmem_cache_alloc_node_noprof(struct kmem_cache *s, gfp_t flags, int node) __assume_slab_alignment __malloc; #define kmem_cache_alloc_node(...) … /* * These macros allow declaring a kmem_buckets * parameter alongside size, which * can be compiled out with CONFIG_SLAB_BUCKETS=n so that a large number of call * sites don't have to pass NULL. */ #ifdef CONFIG_SLAB_BUCKETS #define DECL_BUCKET_PARAMS … #define PASS_BUCKET_PARAMS … #define PASS_BUCKET_PARAM … #else #define DECL_BUCKET_PARAMS(_size, _b) … #define PASS_BUCKET_PARAMS(_size, _b) … #define PASS_BUCKET_PARAM(_b) … #endif /* * The following functions are not to be used directly and are intended only * for internal use from kmalloc() and kmalloc_node() * with the exception of kunit tests */ void *__kmalloc_noprof(size_t size, gfp_t flags) __assume_kmalloc_alignment __alloc_size(1); void *__kmalloc_node_noprof(DECL_BUCKET_PARAMS(size, b), gfp_t flags, int node) __assume_kmalloc_alignment __alloc_size(1); void *__kmalloc_cache_noprof(struct kmem_cache *s, gfp_t flags, size_t size) __assume_kmalloc_alignment __alloc_size(3); void *__kmalloc_cache_node_noprof(struct kmem_cache *s, gfp_t gfpflags, int node, size_t size) __assume_kmalloc_alignment __alloc_size(4); void *__kmalloc_large_noprof(size_t size, gfp_t flags) __assume_page_alignment __alloc_size(1); void *__kmalloc_large_node_noprof(size_t size, gfp_t flags, int node) __assume_page_alignment __alloc_size(1); /** * kmalloc - allocate kernel memory * @size: how many bytes of memory are required. * @flags: describe the allocation context * * kmalloc is the normal method of allocating memory * for objects smaller than page size in the kernel. * * The allocated object address is aligned to at least ARCH_KMALLOC_MINALIGN * bytes. For @size of power of two bytes, the alignment is also guaranteed * to be at least to the size. For other sizes, the alignment is guaranteed to * be at least the largest power-of-two divisor of @size. * * The @flags argument may be one of the GFP flags defined at * include/linux/gfp_types.h and described at * :ref:`Documentation/core-api/mm-api.rst <mm-api-gfp-flags>` * * The recommended usage of the @flags is described at * :ref:`Documentation/core-api/memory-allocation.rst <memory_allocation>` * * Below is a brief outline of the most useful GFP flags * * %GFP_KERNEL * Allocate normal kernel ram. May sleep. * * %GFP_NOWAIT * Allocation will not sleep. * * %GFP_ATOMIC * Allocation will not sleep. May use emergency pools. * * Also it is possible to set different flags by OR'ing * in one or more of the following additional @flags: * * %__GFP_ZERO * Zero the allocated memory before returning. Also see kzalloc(). * * %__GFP_HIGH * This allocation has high priority and may use emergency pools. * * %__GFP_NOFAIL * Indicate that this allocation is in no way allowed to fail * (think twice before using). * * %__GFP_NORETRY * If memory is not immediately available, * then give up at once. * * %__GFP_NOWARN * If allocation fails, don't issue any warnings. * * %__GFP_RETRY_MAYFAIL * Try really hard to succeed the allocation but fail * eventually. */ static __always_inline __alloc_size(1) void *kmalloc_noprof(size_t size, gfp_t flags) { … } #define kmalloc(...) … #define kmem_buckets_alloc(_b, _size, _flags) … #define kmem_buckets_alloc_track_caller(_b, _size, _flags) … static __always_inline __alloc_size(1) void *kmalloc_node_noprof(size_t size, gfp_t flags, int node) { … } #define kmalloc_node(...) … /** * kmalloc_array - allocate memory for an array. * @n: number of elements. * @size: element size. * @flags: the type of memory to allocate (see kmalloc). */ static inline __alloc_size(1, 2) void *kmalloc_array_noprof(size_t n, size_t size, gfp_t flags) { … } #define kmalloc_array(...) … /** * krealloc_array - reallocate memory for an array. * @p: pointer to the memory chunk to reallocate * @new_n: new number of elements to alloc * @new_size: new size of a single member of the array * @flags: the type of memory to allocate (see kmalloc) * * If __GFP_ZERO logic is requested, callers must ensure that, starting with the * initial memory allocation, every subsequent call to this API for the same * memory allocation is flagged with __GFP_ZERO. Otherwise, it is possible that * __GFP_ZERO is not fully honored by this API. * * See krealloc_noprof() for further details. * * In any case, the contents of the object pointed to are preserved up to the * lesser of the new and old sizes. */ static inline __realloc_size(2, 3) void * __must_check krealloc_array_noprof(void *p, size_t new_n, size_t new_size, gfp_t flags) { … } #define krealloc_array(...) … /** * kcalloc - allocate memory for an array. The memory is set to zero. * @n: number of elements. * @size: element size. * @flags: the type of memory to allocate (see kmalloc). */ #define kcalloc(n, size, flags) … void *__kmalloc_node_track_caller_noprof(DECL_BUCKET_PARAMS(size, b), gfp_t flags, int node, unsigned long caller) __alloc_size(1); #define kmalloc_node_track_caller_noprof(size, flags, node, caller) … #define kmalloc_node_track_caller(...) … /* * kmalloc_track_caller is a special version of kmalloc that records the * calling function of the routine calling it for slab leak tracking instead * of just the calling function (confusing, eh?). * It's useful when the call to kmalloc comes from a widely-used standard * allocator where we care about the real place the memory allocation * request comes from. */ #define kmalloc_track_caller(...) … #define kmalloc_track_caller_noprof(...) … static inline __alloc_size(1, 2) void *kmalloc_array_node_noprof(size_t n, size_t size, gfp_t flags, int node) { … } #define kmalloc_array_node(...) … #define kcalloc_node(_n, _size, _flags, _node) … /* * Shortcuts */ #define kmem_cache_zalloc(_k, _flags) … /** * kzalloc - allocate memory. The memory is set to zero. * @size: how many bytes of memory are required. * @flags: the type of memory to allocate (see kmalloc). */ static inline __alloc_size(1) void *kzalloc_noprof(size_t size, gfp_t flags) { … } #define kzalloc(...) … #define kzalloc_node(_size, _flags, _node) … void *__kvmalloc_node_noprof(DECL_BUCKET_PARAMS(size, b), gfp_t flags, int node) __alloc_size(1); #define kvmalloc_node_noprof(size, flags, node) … #define kvmalloc_node(...) … #define kvmalloc(_size, _flags) … #define kvmalloc_noprof(_size, _flags) … #define kvzalloc(_size, _flags) … #define kvzalloc_node(_size, _flags, _node) … #define kmem_buckets_valloc(_b, _size, _flags) … static inline __alloc_size(1, 2) void * kvmalloc_array_node_noprof(size_t n, size_t size, gfp_t flags, int node) { … } #define kvmalloc_array_noprof(...) … #define kvcalloc_node_noprof(_n,_s,_f,_node) … #define kvcalloc_noprof(...) … #define kvmalloc_array(...) … #define kvcalloc_node(...) … #define kvcalloc(...) … void *kvrealloc_noprof(const void *p, size_t size, gfp_t flags) __realloc_size(2); #define kvrealloc(...) … extern void kvfree(const void *addr); DEFINE_FREE(…) extern void kvfree_sensitive(const void *addr, size_t len); unsigned int kmem_cache_size(struct kmem_cache *s); /** * kmalloc_size_roundup - Report allocation bucket size for the given size * * @size: Number of bytes to round up from. * * This returns the number of bytes that would be available in a kmalloc() * allocation of @size bytes. For example, a 126 byte request would be * rounded up to the next sized kmalloc bucket, 128 bytes. (This is strictly * for the general-purpose kmalloc()-based allocations, and is not for the * pre-sized kmem_cache_alloc()-based allocations.) * * Use this to kmalloc() the full bucket size ahead of time instead of using * ksize() to query the size after an allocation. */ size_t kmalloc_size_roundup(size_t size); void __init kmem_cache_init_late(void); #endif /* _LINUX_SLAB_H */
Codebase Browser
linux