# SPDX-License-Identifier: GPL-2.0-only
include ../../scripts/Makefile.include
include ../../scripts/utilities.mak
ARTICLES =
# with their own formatting rules.
SP_ARTICLES =
MAN1_TXT= \
$(filter-out $(addsuffix .txt, $(ARTICLES) $(SP_ARTICLES)), \
$(wildcard perf-*.txt)) \
perf.txt
MAN5_TXT=
MAN7_TXT=
MAN_TXT = $(MAN1_TXT) $(MAN5_TXT) $(MAN7_TXT)
_MAN_XML=$(patsubst %.txt,%.xml,$(MAN_TXT))
_MAN_HTML=$(patsubst %.txt,%.html,$(MAN_TXT))
MAN_XML=$(addprefix $(OUTPUT),$(_MAN_XML))
MAN_HTML=$(addprefix $(OUTPUT),$(_MAN_HTML))
_DOC_HTML = $(_MAN_HTML)
_DOC_HTML+=$(patsubst %,%.html,$(ARTICLES) $(SP_ARTICLES))
DOC_HTML=$(addprefix $(OUTPUT),$(_DOC_HTML))
_DOC_MAN1=$(patsubst %.txt,%.1,$(MAN1_TXT))
_DOC_MAN5=$(patsubst %.txt,%.5,$(MAN5_TXT))
_DOC_MAN7=$(patsubst %.txt,%.7,$(MAN7_TXT))
DOC_MAN1=$(addprefix $(OUTPUT),$(_DOC_MAN1))
DOC_MAN5=$(addprefix $(OUTPUT),$(_DOC_MAN5))
DOC_MAN7=$(addprefix $(OUTPUT),$(_DOC_MAN7))
# Make the path relative to DESTDIR, not prefix
ifndef DESTDIR
prefix?=$(HOME)
endif
bindir?=$(prefix)/bin
htmldir?=$(prefix)/share/doc/perf-doc
pdfdir?=$(prefix)/share/doc/perf-doc
mandir?=$(prefix)/share/man
man1dir=$(mandir)/man1
man5dir=$(mandir)/man5
man7dir=$(mandir)/man7
ASCIIDOC=asciidoc
ASCIIDOC_EXTRA += --unsafe -f asciidoc.conf
ASCIIDOC_HTML = xhtml11
MANPAGE_XSL = manpage-normal.xsl
XMLTO_EXTRA =
INSTALL?=install
RM ?= rm -f
DOC_REF = origin/man
HTML_REF = origin/html
ifdef USE_ASCIIDOCTOR
ASCIIDOC = asciidoctor
ASCIIDOC_EXTRA += -a compat-mode
ASCIIDOC_EXTRA += -I. -rasciidoctor-extensions
ASCIIDOC_EXTRA += -a mansource="perf" -a manmanual="perf Manual"
ASCIIDOC_HTML = xhtml5
endif
infodir?=$(prefix)/share/info
MAKEINFO=makeinfo
INSTALL_INFO=install-info
DOCBOOK2X_TEXI=docbook2x-texi
DBLATEX=dblatex
XMLTO=xmlto
ifndef PERL_PATH
PERL_PATH = /usr/bin/perl
endif
-include ../config.mak.autogen
-include ../config.mak
_tmp_tool_path := $(call get-executable,$(ASCIIDOC))
ifeq ($(_tmp_tool_path),)
missing_tools = $(ASCIIDOC)
endif
ifndef USE_ASCIIDOCTOR
_tmp_tool_path := $(call get-executable,$(XMLTO))
ifeq ($(_tmp_tool_path),)
missing_tools += $(XMLTO)
endif
endif
#
# For asciidoc ...
# -7.1.2, no extra settings are needed.
# 8.0-, set ASCIIDOC8.
#
#
# For docbook-xsl ...
# -1.68.1, set ASCIIDOC_NO_ROFF? (based on changelog from 1.73.0)
# 1.69.0, no extra settings are needed?
# 1.69.1-1.71.0, set DOCBOOK_SUPPRESS_SP?
# 1.71.1, no extra settings are needed?
# 1.72.0, set DOCBOOK_XSL_172.
# 1.73.0-, set ASCIIDOC_NO_ROFF
#
#
# If you had been using DOCBOOK_XSL_172 in an attempt to get rid
# of 'the ".ft C" problem' in your generated manpages, and you
# instead ended up with weird characters around callouts, try
# using ASCIIDOC_NO_ROFF instead (it works fine with ASCIIDOC8).
#
ifdef ASCIIDOC8
ASCIIDOC_EXTRA += -a asciidoc7compatible
endif
ifdef DOCBOOK_XSL_172
ASCIIDOC_EXTRA += -a perf-asciidoc-no-roff
MANPAGE_XSL = manpage-1.72.xsl
else
ifdef ASCIIDOC_NO_ROFF
# docbook-xsl after 1.72 needs the regular XSL, but will not
# pass-thru raw roff codes from asciidoc.conf, so turn them off.
ASCIIDOC_EXTRA += -a perf-asciidoc-no-roff
endif
endif
ifdef MAN_BOLD_LITERAL
XMLTO_EXTRA += -m manpage-bold-literal.xsl
endif
ifdef DOCBOOK_SUPPRESS_SP
XMLTO_EXTRA += -m manpage-suppress-sp.xsl
endif
SHELL_PATH ?= $(SHELL)
# Shell quote;
SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
#
# Please note that there is a minor bug in asciidoc.
# The version after 6.0.3 _will_ include the patch found here:
# http://marc.theaimsgroup.com/?l=perf&m=111558757202243&w=2
#
# Until that version is released you may have to apply the patch
# yourself - yes, all 6 characters of it!
#
QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir
QUIET_SUBDIR1 =
ifneq ($(findstring $(MAKEFLAGS),w),w)
PRINT_DIR = --no-print-directory
else # "make -w"
NO_SUBDIR = :
endif
ifneq ($(findstring $(MAKEFLAGS),s),s)
ifneq ($(V),1)
QUIET_ASCIIDOC = @echo ' ASCIIDOC '$@;
QUIET_XMLTO = @echo ' XMLTO '$@;
QUIET_DB2TEXI = @echo ' DB2TEXI '$@;
QUIET_MAKEINFO = @echo ' MAKEINFO '$@;
QUIET_DBLATEX = @echo ' DBLATEX '$@;
QUIET_XSLTPROC = @echo ' XSLTPROC '$@;
QUIET_GEN = @echo ' GEN '$@;
QUIET_STDERR = 2> /dev/null
QUIET_SUBDIR0 = +@subdir=
QUIET_SUBDIR1 = ;$(NO_SUBDIR) \
echo ' SUBDIR ' $$subdir; \
$(MAKE) $(PRINT_DIR) -C $$subdir
export V
endif
endif
all: html man info
html: $(DOC_HTML)
$(DOC_HTML) $(DOC_MAN1) $(DOC_MAN5) $(DOC_MAN7): asciidoc.conf
man: man1 man5 man7
man1: $(DOC_MAN1)
man5: $(DOC_MAN5)
man7: $(DOC_MAN7)
info: $(OUTPUT)perf.info $(OUTPUT)perfman.info
install: install-man
check-man-tools:
ifdef missing_tools
$(error "You need to install $(missing_tools) for man pages")
endif
do-install-man: man
$(call QUIET_INSTALL, Documentation-man) \
$(INSTALL) -d -m 755 $(DESTDIR)$(man1dir); \
# $(INSTALL) -d -m 755 $(DESTDIR)$(man5dir); \
# $(INSTALL) -d -m 755 $(DESTDIR)$(man7dir); \
$(INSTALL) -m 644 $(DOC_MAN1) $(DESTDIR)$(man1dir); \
# $(INSTALL) -m 644 $(DOC_MAN5) $(DESTDIR)$(man5dir); \
# $(INSTALL) -m 644 $(DOC_MAN7) $(DESTDIR)$(man7dir)
install-man: check-man-tools man do-install-man
ifdef missing_tools
DO_INSTALL_MAN = $(warning Please install $(missing_tools) to have the man pages installed)
else
DO_INSTALL_MAN = do-install-man
endif
try-install-man: $(DO_INSTALL_MAN)
install-info: info
$(call QUIET_INSTALL, Documentation-info) \
$(INSTALL) -d -m 755 $(DESTDIR)$(infodir); \
$(INSTALL) -m 644 $(OUTPUT)perf.info $(OUTPUT)perfman.info $(DESTDIR)$(infodir); \
if test -r $(DESTDIR)$(infodir)/dir; then \
$(INSTALL_INFO) --info-dir=$(DESTDIR)$(infodir) perf.info ;\
$(INSTALL_INFO) --info-dir=$(DESTDIR)$(infodir) perfman.info ;\
else \
echo "No directory found in $(DESTDIR)$(infodir)" >&2 ; \
fi
#install-html: html
# '$(SHELL_PATH_SQ)' ./install-webdoc.sh $(DESTDIR)$(htmldir)
#
# Determine "include::" file references in asciidoc files.
#
$(OUTPUT)doc.dep : $(wildcard *.txt) build-docdep.perl
$(QUIET_GEN)$(RM) $@+ $@ && \
$(PERL_PATH) ./build-docdep.perl >$@+ $(QUIET_STDERR) && \
mv $@+ $@
-include $(OUTPUT)doc.dep
CLEAN_FILES = \
$(MAN_XML) $(addsuffix +,$(MAN_XML)) \
$(MAN_HTML) $(addsuffix +,$(MAN_HTML)) \
$(DOC_HTML) $(DOC_MAN1) $(DOC_MAN5) $(DOC_MAN7) \
$(OUTPUT)*.texi $(OUTPUT)*.texi+ $(OUTPUT)*.texi++ \
$(OUTPUT)perf.info $(OUTPUT)perfman.info $(OUTPUT)doc.dep \
$(OUTPUT)technical/api-*.html $(OUTPUT)technical/api-index.txt
clean:
$(call QUIET_CLEAN, Documentation) $(RM) $(CLEAN_FILES)
$(MAN_HTML): $(OUTPUT)%.html : %.txt
$(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
$(ASCIIDOC) -b $(ASCIIDOC_HTML) -d manpage \
$(ASCIIDOC_EXTRA) -aperf_version=$(PERF_VERSION) -o $@+ $< && \
mv $@+ $@
# Generate date from either KBUILD_BUILD_TIMESTAMP or git log of
# the doc input file
PERF_DATE = $(strip \
$(if $(KBUILD_BUILD_TIMESTAMP), \
$(shell date -u -d '$(KBUILD_BUILD_TIMESTAMP)' +%Y-%m-%d), \
$(shell git log -1 --pretty="format:%cd" \
--date=short --no-show-signature $<)))
ifdef USE_ASCIIDOCTOR
$(OUTPUT)%.1 $(OUTPUT)%.5 $(OUTPUT)%.7 : %.txt
$(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
$(ASCIIDOC) -b manpage -d manpage \
$(ASCIIDOC_EXTRA) -aperf_version=$(PERF_VERSION) \
-adocdate=$(PERF_DATE) -o $@+ $< && \
mv $@+ $@
endif
$(OUTPUT)%.1 $(OUTPUT)%.5 $(OUTPUT)%.7 : $(OUTPUT)%.xml
$(QUIET_XMLTO)$(RM) $@ && \
$(XMLTO) -o $(OUTPUT). -m $(MANPAGE_XSL) $(XMLTO_EXTRA) man $<
$(OUTPUT)%.xml : %.txt
$(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
$(ASCIIDOC) -b docbook -d manpage \
$(ASCIIDOC_EXTRA) -aperf_version=$(PERF_VERSION) \
-aperf_date=$(PERF_DATE) -o $@+ $< && \
mv $@+ $@
XSLT = docbook.xsl
XSLTOPTS = --xinclude --stringparam html.stylesheet docbook-xsl.css
$(OUTPUT)perfman.texi: $(MAN_XML) cat-texi.perl
$(QUIET_DB2TEXI)$(RM) $@+ $@ && \
($(foreach xml,$(MAN_XML),$(DOCBOOK2X_TEXI) --encoding=UTF-8 \
--to-stdout $(xml) &&) true) > $@++ && \
$(PERL_PATH) cat-texi.perl $@ <$@++ >$@+ && \
rm $@++ && \
mv $@+ $@
$(OUTPUT)perfman.info: $(OUTPUT)perfman.texi
$(QUIET_MAKEINFO)$(MAKEINFO) --no-split --no-validate -o $@ $*.texi
$(patsubst %.txt,%.texi,$(MAN_TXT)): %.texi : %.xml
$(QUIET_DB2TEXI)$(RM) $@+ $@ && \
$(DOCBOOK2X_TEXI) --to-stdout $*.xml >$@+ && \
mv $@+ $@
$(patsubst %,%.html,$(ARTICLES)) : %.html : %.txt
$(QUIET_ASCIIDOC)$(ASCIIDOC) -b $(ASCIIDOC_HTML) $*.txt
WEBDOC_DEST = /pub/software/tools/perf/docs
# UNIMPLEMENTED
#install-webdoc : html
# '$(SHELL_PATH_SQ)' ./install-webdoc.sh $(WEBDOC_DEST)
# quick-install: quick-install-man
# quick-install-man:
# '$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(DOC_REF) $(DESTDIR)$(mandir)
#quick-install-html:
# '$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(HTML_REF) $(DESTDIR)$(htmldir)
Codebase Browser
linux