linux/arch/arm/boot/dts/marvell/mmp3.dtsi

// SPDX-License-Identifier: GPL-2.0+ OR MIT
/*
 *  Copyright (C) 2019 Lubomir Rintel <[email protected]>
 */

#include <dt-bindings/clock/marvell,mmp2.h>
#include <dt-bindings/power/marvell,mmp2.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>

/ {
	#address-cells = <1>;
	#size-cells = <1>;

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;
		enable-method = "marvell,mmp3-smp";

		cpu@0 {
			compatible = "marvell,pj4b";
			device_type = "cpu";
			next-level-cache = <&l2>;
			reg = <0>;
		};

		cpu@1 {
			compatible = "marvell,pj4b";
			device_type = "cpu";
			next-level-cache = <&l2>;
			reg = <1>;
		};
	};

	soc {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		interrupt-parent = <&gic>;
		ranges;

		axi@d4200000 {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0xd4200000 0x00200000>;
			ranges;

			interrupt-controller@d4282000 {
				compatible = "marvell,mmp3-intc";
				interrupt-controller;
				#interrupt-cells = <1>;
				reg = <0xd4282000 0x1000>,
				      <0xd4284000 0x100>;
				mrvl,intc-nr-irqs = <64>;
			};

			pmic_mux: interrupt-controller@d4282150 {
				compatible = "mrvl,mmp2-mux-intc";
				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-controller;
				#interrupt-cells = <1>;
				reg = <0x150 0x4>, <0x168 0x4>;
				reg-names = "mux status", "mux mask";
				mrvl,intc-nr-irqs = <4>;
			};

			rtc_mux: interrupt-controller@d4282154 {
				compatible = "mrvl,mmp2-mux-intc";
				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-controller;
				#interrupt-cells = <1>;
				reg = <0x154 0x4>, <0x16c 0x4>;
				reg-names = "mux status", "mux mask";
				mrvl,intc-nr-irqs = <2>;
			};

			hsi3_mux: interrupt-controller@d42821bc {
				compatible = "mrvl,mmp2-mux-intc";
				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-controller;
				#interrupt-cells = <1>;
				reg = <0x1bc 0x4>, <0x1a4 0x4>;
				reg-names = "mux status", "mux mask";
				mrvl,intc-nr-irqs = <3>;
			};

			gpu_mux: interrupt-controller@d42821c0 {
				compatible = "mrvl,mmp2-mux-intc";
				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-controller;
				#interrupt-cells = <1>;
				reg = <0x1c0 0x4>, <0x1a8 0x4>;
				reg-names = "mux status", "mux mask";
				mrvl,intc-nr-irqs = <3>;
			};

			twsi_mux: interrupt-controller@d4282158 {
				compatible = "mrvl,mmp2-mux-intc";
				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-controller;
				#interrupt-cells = <1>;
				reg = <0x158 0x4>, <0x170 0x4>;
				reg-names = "mux status", "mux mask";
				mrvl,intc-nr-irqs = <5>;
			};

			hsi2_mux: interrupt-controller@d42821c4 {
				compatible = "mrvl,mmp2-mux-intc";
				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-controller;
				#interrupt-cells = <1>;
				reg = <0x1c4 0x4>, <0x1ac 0x4>;
				reg-names = "mux status", "mux mask";
				mrvl,intc-nr-irqs = <2>;
			};

			dxo_mux: interrupt-controller@d42821c8 {
				compatible = "mrvl,mmp2-mux-intc";
				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-controller;
				#interrupt-cells = <1>;
				reg = <0x1c8 0x4>, <0x1b0 0x4>;
				reg-names = "mux status", "mux mask";
				mrvl,intc-nr-irqs = <2>;
			};

			misc1_mux: interrupt-controller@d428215c {
				compatible = "mrvl,mmp2-mux-intc";
				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-controller;
				#interrupt-cells = <1>;
				reg = <0x15c 0x4>, <0x174 0x4>;
				reg-names = "mux status", "mux mask";
				mrvl,intc-nr-irqs = <31>;
			};

			ci_mux: interrupt-controller@d42821cc {
				compatible = "mrvl,mmp2-mux-intc";
				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-controller;
				#interrupt-cells = <1>;
				reg = <0x1cc 0x4>, <0x1b4 0x4>;
				reg-names = "mux status", "mux mask";
				mrvl,intc-nr-irqs = <2>;
			};

			ssp_mux: interrupt-controller@d4282160 {
				compatible = "mrvl,mmp2-mux-intc";
				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-controller;
				#interrupt-cells = <1>;
				reg = <0x160 0x4>, <0x178 0x4>;
				reg-names = "mux status", "mux mask";
				mrvl,intc-nr-irqs = <2>;
			};

			hsi1_mux: interrupt-controller@d4282184 {
				compatible = "mrvl,mmp2-mux-intc";
				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-controller;
				#interrupt-cells = <1>;
				reg = <0x184 0x4>, <0x17c 0x4>;
				reg-names = "mux status", "mux mask";
				mrvl,intc-nr-irqs = <4>;
			};

			misc2_mux: interrupt-controller@d4282188 {
				compatible = "mrvl,mmp2-mux-intc";
				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-controller;
				#interrupt-cells = <1>;
				reg = <0x188 0x4>, <0x180 0x4>;
				reg-names = "mux status", "mux mask";
				mrvl,intc-nr-irqs = <20>;
			};

			hsi0_mux: interrupt-controller@d42821d0 {
				compatible = "mrvl,mmp2-mux-intc";
				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-controller;
				#interrupt-cells = <1>;
				reg = <0x1d0 0x4>, <0x1b8 0x4>;
				reg-names = "mux status", "mux mask";
				mrvl,intc-nr-irqs = <5>;
			};

			usb_otg_phy0: usb-phy@d4207000 {
				compatible = "marvell,mmp3-usb-phy";
				reg = <0xd4207000 0x40>;
				#phy-cells = <0>;
				status = "disabled";
			};

			usb_otg0: usb@d4208000 {
				compatible = "marvell,pxau2o-ehci";
				reg = <0xd4208000 0x200>;
				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&soc_clocks MMP2_CLK_USB>;
				clock-names = "USBCLK";
				phys = <&usb_otg_phy0>;
				phy-names = "usb";
				status = "disabled";
			};

			hsic_phy0: usb-phy@f0001800 {
				compatible = "marvell,mmp3-hsic-phy";
				reg = <0xf0001800 0x40>;
				#phy-cells = <0>;
				status = "disabled";
			};

			hsic0: usb@f0001000 {
				compatible = "marvell,pxau2o-ehci";
				reg = <0xf0001000 0x200>;
				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&soc_clocks MMP2_CLK_USBHSIC0>;
				clock-names = "USBCLK";
				phys = <&hsic_phy0>;
				phy-names = "usb";
				phy_type = "hsic";
				#address-cells = <0x01>;
				#size-cells = <0x00>;
				status = "disabled";
			};

			hsic_phy1: usb-phy@f0002800 {
				compatible = "marvell,mmp3-hsic-phy";
				reg = <0xf0002800 0x40>;
				#phy-cells = <0>;
				status = "disabled";
			};

			hsic1: usb@f0002000 {
				compatible = "marvell,pxau2o-ehci";
				reg = <0xf0002000 0x200>;
				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&soc_clocks MMP2_CLK_USBHSIC1>;
				clock-names = "USBCLK";
				phys = <&hsic_phy1>;
				phy-names = "usb";
				phy_type = "hsic";
				#address-cells = <0x01>;
				#size-cells = <0x00>;
				status = "disabled";
			};

			mmc1: mmc@d4280000 {
				compatible = "mrvl,pxav3-mmc";
				reg = <0xd4280000 0x120>;
				clocks = <&soc_clocks MMP2_CLK_SDH0>;
				clock-names = "io";
				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
				status = "disabled";
			};

			mmc2: mmc@d4280800 {
				compatible = "mrvl,pxav3-mmc";
				reg = <0xd4280800 0x120>;
				clocks = <&soc_clocks MMP2_CLK_SDH1>;
				clock-names = "io";
				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
				status = "disabled";
			};

			mmc3: mmc@d4281000 {
				compatible = "mrvl,pxav3-mmc";
				reg = <0xd4281000 0x120>;
				clocks = <&soc_clocks MMP2_CLK_SDH2>;
				clock-names = "io";
				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
				status = "disabled";
			};

			mmc4: mmc@d4281800 {
				compatible = "mrvl,pxav3-mmc";
				reg = <0xd4281800 0x120>;
				clocks = <&soc_clocks MMP2_CLK_SDH3>;
				clock-names = "io";
				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
				status = "disabled";
			};

			mmc5: mmc@d4217000 {
				compatible = "mrvl,pxav3-mmc";
				reg = <0xd4217000 0x120>;
				clocks = <&soc_clocks MMP3_CLK_SDH4>;
				clock-names = "io";
				interrupt-parent = <&hsi1_mux>;
				interrupts = <0>;
				status = "disabled";
			};

			camera0: camera@d420a000 {
				compatible = "marvell,mmp2-ccic";
				reg = <0xd420a000 0x800>;
				interrupts = <1>;
				interrupt-parent = <&ci_mux>;
				clocks = <&soc_clocks MMP2_CLK_CCIC0>;
				clock-names = "axi";
				power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
				#clock-cells = <0>;
				clock-output-names = "mclk";
				status = "disabled";
			};

			camera1: camera@d420a800 {
				compatible = "marvell,mmp2-ccic";
				reg = <0xd420a800 0x800>;
				interrupts = <2>;
				interrupt-parent = <&ci_mux>;
				clocks = <&soc_clocks MMP2_CLK_CCIC1>;
				clock-names = "axi";
				power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
				#clock-cells = <0>;
				clock-output-names = "mclk";
				status = "disabled";
			};

			gpu_3d: gpu@d420d000 {
				compatible = "vivante,gc";
				reg = <0xd420d000 0x2000>;
				interrupt-parent = <&gpu_mux>;
				interrupts = <0>;
				status = "disabled";
				clocks = <&soc_clocks MMP3_CLK_GPU_3D>,
					 <&soc_clocks MMP3_CLK_GPU_BUS>;
				clock-names = "core", "bus";
				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>;
			};

			gpu_2d: gpu@d420f000 {
				compatible = "vivante,gc";
				reg = <0xd420f000 0x2000>;
				interrupt-parent = <&gpu_mux>;
				interrupts = <2>;
				status = "disabled";
				clocks = <&soc_clocks MMP3_CLK_GPU_2D>,
					 <&soc_clocks MMP3_CLK_GPU_BUS>;
				clock-names = "core", "bus";
				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>;
			};
		};

		apb@d4000000 {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0xd4000000 0x00200000>;
			ranges;

			timer: timer@d4014000 {
				compatible = "mrvl,mmp-timer";
				reg = <0xd4014000 0x100>;
				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&soc_clocks MMP2_CLK_TIMER>;
			};

			uart1: serial@d4030000 {
				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
				reg = <0xd4030000 0x1000>;
				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&soc_clocks MMP2_CLK_UART0>;
				resets = <&soc_clocks MMP2_CLK_UART0>;
				reg-shift = <2>;
				status = "disabled";
			};

			uart2: serial@d4017000 {
				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
				reg = <0xd4017000 0x1000>;
				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&soc_clocks MMP2_CLK_UART1>;
				resets = <&soc_clocks MMP2_CLK_UART1>;
				reg-shift = <2>;
				status = "disabled";
			};

			uart3: serial@d4018000 {
				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
				reg = <0xd4018000 0x1000>;
				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&soc_clocks MMP2_CLK_UART2>;
				resets = <&soc_clocks MMP2_CLK_UART2>;
				reg-shift = <2>;
				status = "disabled";
			};

			uart4: serial@d4016000 {
				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
				reg = <0xd4016000 0x1000>;
				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&soc_clocks MMP2_CLK_UART3>;
				resets = <&soc_clocks MMP2_CLK_UART3>;
				reg-shift = <2>;
				status = "disabled";
			};

			gpio: gpio@d4019000 {
				compatible = "marvell,mmp2-gpio";
				#address-cells = <1>;
				#size-cells = <1>;
				reg = <0xd4019000 0x1000>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-names = "gpio_mux";
				clocks = <&soc_clocks MMP2_CLK_GPIO>;
				resets = <&soc_clocks MMP2_CLK_GPIO>;
				interrupt-controller;
				#interrupt-cells = <2>;
				ranges;

				gcb0: gpio@d4019000 {
					reg = <0xd4019000 0x4>;
				};

				gcb1: gpio@d4019004 {
					reg = <0xd4019004 0x4>;
				};

				gcb2: gpio@d4019008 {
					reg = <0xd4019008 0x4>;
				};

				gcb3: gpio@d4019100 {
					reg = <0xd4019100 0x4>;
				};

				gcb4: gpio@d4019104 {
					reg = <0xd4019104 0x4>;
				};

				gcb5: gpio@d4019108 {
					reg = <0xd4019108 0x4>;
				};
			};

			twsi1: i2c@d4011000 {
				compatible = "mrvl,mmp-twsi";
				reg = <0xd4011000 0x70>;
				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&soc_clocks MMP2_CLK_TWSI0>;
				resets = <&soc_clocks MMP2_CLK_TWSI0>;
				#address-cells = <1>;
				#size-cells = <0>;
				mrvl,i2c-fast-mode;
				status = "disabled";
			};

			twsi2: i2c@d4031000 {
				compatible = "mrvl,mmp-twsi";
				reg = <0xd4031000 0x70>;
				interrupt-parent = <&twsi_mux>;
				interrupts = <0>;
				clocks = <&soc_clocks MMP2_CLK_TWSI1>;
				resets = <&soc_clocks MMP2_CLK_TWSI1>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			twsi3: i2c@d4032000 {
				compatible = "mrvl,mmp-twsi";
				reg = <0xd4032000 0x70>;
				interrupt-parent = <&twsi_mux>;
				interrupts = <1>;
				clocks = <&soc_clocks MMP2_CLK_TWSI2>;
				resets = <&soc_clocks MMP2_CLK_TWSI2>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			twsi4: i2c@d4033000 {
				compatible = "mrvl,mmp-twsi";
				reg = <0xd4033000 0x70>;
				interrupt-parent = <&twsi_mux>;
				interrupts = <2>;
				clocks = <&soc_clocks MMP2_CLK_TWSI3>;
				resets = <&soc_clocks MMP2_CLK_TWSI3>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};


			twsi5: i2c@d4033800 {
				compatible = "mrvl,mmp-twsi";
				reg = <0xd4033800 0x70>;
				interrupt-parent = <&twsi_mux>;
				interrupts = <3>;
				clocks = <&soc_clocks MMP2_CLK_TWSI4>;
				resets = <&soc_clocks MMP2_CLK_TWSI4>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			twsi6: i2c@d4034000 {
				compatible = "mrvl,mmp-twsi";
				reg = <0xd4034000 0x70>;
				interrupt-parent = <&twsi_mux>;
				interrupts = <4>;
				clocks = <&soc_clocks MMP2_CLK_TWSI5>;
				resets = <&soc_clocks MMP2_CLK_TWSI5>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			rtc: rtc@d4010000 {
				compatible = "mrvl,mmp-rtc";
				reg = <0xd4010000 0x1000>;
				interrupts = <1>, <0>;
				interrupt-names = "rtc 1Hz", "rtc alarm";
				interrupt-parent = <&rtc_mux>;
				clocks = <&soc_clocks MMP2_CLK_RTC>;
				resets = <&soc_clocks MMP2_CLK_RTC>;
				status = "disabled";
			};

			ssp1: spi@d4035000 {
				compatible = "marvell,mmp2-ssp";
				reg = <0xd4035000 0x1000>;
				clocks = <&soc_clocks MMP2_CLK_SSP0>;
				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			ssp2: spi@d4036000 {
				compatible = "marvell,mmp2-ssp";
				reg = <0xd4036000 0x1000>;
				clocks = <&soc_clocks MMP2_CLK_SSP1>;
				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			ssp3: spi@d4037000 {
				compatible = "marvell,mmp2-ssp";
				reg = <0xd4037000 0x1000>;
				clocks = <&soc_clocks MMP2_CLK_SSP2>;
				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			ssp4: spi@d4039000 {
				compatible = "marvell,mmp2-ssp";
				reg = <0xd4039000 0x1000>;
				clocks = <&soc_clocks MMP2_CLK_SSP3>;
				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};
		};

		l2: cache-controller@d0020000 {
			compatible = "marvell,tauros3-cache", "arm,pl310-cache";
			reg = <0xd0020000 0x1000>;
			cache-unified;
			cache-level = <2>;
		};

		soc_clocks: clocks@d4050000 {
			compatible = "marvell,mmp3-clock";
			reg = <0xd4050000 0x2000>,
			      <0xd4282800 0x400>,
			      <0xd4015000 0x1000>;
			reg-names = "mpmu", "apmu", "apbc";
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
		};

		snoop-control-unit@e0000000 {
			compatible = "arm,arm11mp-scu";
			reg = <0xe0000000 0x100>;
		};

		gic: interrupt-controller@e0001000 {
			compatible = "arm,arm11mp-gic";
			interrupt-controller;
			#interrupt-cells = <3>;
			reg = <0xe0001000 0x1000>,
			      <0xe0000100 0x100>;
		};

		local-timer@e0000600 {
			compatible = "arm,arm11mp-twd-timer";
			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
						  IRQ_TYPE_EDGE_RISING)>;
			reg = <0xe0000600 0x20>;
		};

		watchdog@e0000620 {
			compatible = "arm,arm11mp-twd-wdt";
			reg = <0xe0000620 0x20>;
			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
						  IRQ_TYPE_EDGE_RISING)>;
		};
	};
};