// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Marvell Armada XP family SoC
*
* Copyright (C) 2012 Marvell
*
* Thomas Petazzoni <[email protected]>
*
* Contains definitions specific to the Armada XP MV78260 SoC that are not
* common to all Armada XP SoCs.
*/
#include "armada-xp.dtsi"
/ {
model = "Marvell Armada XP MV78260 SoC";
compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "marvell,armada-xp-smp";
cpu@0 {
device_type = "cpu";
compatible = "marvell,sheeva-v7";
reg = <0>;
clocks = <&cpuclk 0>;
clock-latency = <1000000>;
};
cpu@1 {
device_type = "cpu";
compatible = "marvell,sheeva-v7";
reg = <1>;
clocks = <&cpuclk 1>;
clock-latency = <1000000>;
};
};
soc {
/*
* MV78260 has 3 PCIe units Gen2.0: Two units can be
* configured as x4 or quad x1 lanes. One unit is
* x4 only.
*/
pciec: pcie@82000000 {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
msi-parent = <&mpic>;
bus-range = <0x00 0xff>;
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */
0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */
0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */
0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */
0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
pcie1: pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
interrupt-names = "intx";
interrupts-extended = <&mpic 58>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie1_intc 0>,
<0 0 0 2 &pcie1_intc 1>,
<0 0 0 3 &pcie1_intc 2>,
<0 0 0 4 &pcie1_intc 3>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
status = "disabled";
pcie1_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
};
};
pcie2: pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
interrupt-names = "intx";
interrupts-extended = <&mpic 59>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie2_intc 0>,
<0 0 0 2 &pcie2_intc 1>,
<0 0 0 3 &pcie2_intc 2>,
<0 0 0 4 &pcie2_intc 3>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 6>;
status = "disabled";
pcie2_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
};
};
pcie3: pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
interrupt-names = "intx";
interrupts-extended = <&mpic 60>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie3_intc 0>,
<0 0 0 2 &pcie3_intc 1>,
<0 0 0 3 &pcie3_intc 2>,
<0 0 0 4 &pcie3_intc 3>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <2>;
clocks = <&gateclk 7>;
status = "disabled";
pcie3_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
};
};
pcie4: pcie@4,0 {
device_type = "pci";
assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
interrupt-names = "intx";
interrupts-extended = <&mpic 61>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie4_intc 0>,
<0 0 0 2 &pcie4_intc 1>,
<0 0 0 3 &pcie4_intc 2>,
<0 0 0 4 &pcie4_intc 3>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <3>;
clocks = <&gateclk 8>;
status = "disabled";
pcie4_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
};
};
pcie5: pcie@5,0 {
device_type = "pci";
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
interrupt-names = "intx";
interrupts-extended = <&mpic 62>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
0x81000000 0 0 0x81000000 0x5 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie5_intc 0>,
<0 0 0 2 &pcie5_intc 1>,
<0 0 0 3 &pcie5_intc 2>,
<0 0 0 4 &pcie5_intc 3>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 9>;
status = "disabled";
pcie5_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
};
};
pcie6: pcie@6,0 {
device_type = "pci";
assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
reg = <0x3000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
interrupt-names = "intx";
interrupts-extended = <&mpic 63>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
0x81000000 0 0 0x81000000 0x6 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie6_intc 0>,
<0 0 0 2 &pcie6_intc 1>,
<0 0 0 3 &pcie6_intc 2>,
<0 0 0 4 &pcie6_intc 3>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 10>;
status = "disabled";
pcie6_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
};
};
pcie7: pcie@7,0 {
device_type = "pci";
assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
reg = <0x3800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
interrupt-names = "intx";
interrupts-extended = <&mpic 64>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
0x81000000 0 0 0x81000000 0x7 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie7_intc 0>,
<0 0 0 2 &pcie7_intc 1>,
<0 0 0 3 &pcie7_intc 2>,
<0 0 0 4 &pcie7_intc 3>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <2>;
clocks = <&gateclk 11>;
status = "disabled";
pcie7_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
};
};
pcie8: pcie@8,0 {
device_type = "pci";
assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
reg = <0x4000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
interrupt-names = "intx";
interrupts-extended = <&mpic 65>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
0x81000000 0 0 0x81000000 0x8 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie8_intc 0>,
<0 0 0 2 &pcie8_intc 1>,
<0 0 0 3 &pcie8_intc 2>,
<0 0 0 4 &pcie8_intc 3>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <3>;
clocks = <&gateclk 12>;
status = "disabled";
pcie8_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
};
};
pcie9: pcie@9,0 {
device_type = "pci";
assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
interrupt-names = "intx";
interrupts-extended = <&mpic 99>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
0x81000000 0 0 0x81000000 0x9 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie9_intc 0>,
<0 0 0 2 &pcie9_intc 1>,
<0 0 0 3 &pcie9_intc 2>,
<0 0 0 4 &pcie9_intc 3>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 26>;
status = "disabled";
pcie9_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
};
};
};
internal-regs {
gpio0: gpio@18100 {
compatible = "marvell,armada-370-gpio",
"marvell,orion-gpio";
reg = <0x18100 0x40>, <0x181c0 0x08>;
reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
#pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
clocks = <&coreclk 0>;
};
gpio1: gpio@18140 {
compatible = "marvell,armada-370-gpio",
"marvell,orion-gpio";
reg = <0x18140 0x40>, <0x181c8 0x08>;
reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
#pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
clocks = <&coreclk 0>;
};
gpio2: gpio@18180 {
compatible = "marvell,armada-370-gpio",
"marvell,orion-gpio";
reg = <0x18180 0x40>;
ngpios = <3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <91>;
};
eth3: ethernet@34000 {
compatible = "marvell,armada-xp-neta";
reg = <0x34000 0x4000>;
interrupts = <14>;
clocks = <&gateclk 1>;
status = "disabled";
};
};
};
};
&pinctrl {
compatible = "marvell,mv78260-pinctrl";
};