/*
* Device Tree file for Buffalo/Revogear Kurobox Pro
*
* Copyright (C) 2016
* Roger Shimizu <[email protected]>
*
* Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c
* Copyright (C) Ronen Shitrit <[email protected]>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "orion5x-linkstation.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Buffalo/Revogear Kurobox Pro";
compatible = "buffalo,kurobox-pro", "marvell,orion5x-88f5182", "marvell,orion5x";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
<MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
<MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>,
<MBUS_ID(0x01, 0x1e) 0 0xfc000000 0x1000000>;
};
memory { /* 128 MB */
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
};
&pinctrl {
pmx_power_hdd: pmx-power-hdd {
marvell,pins = "mpp1";
marvell,function = "gpio";
};
pmx_power_usb: pmx-power-usb {
marvell,pins = "mpp9";
marvell,function = "gpio";
};
};
&devbus_cs0 {
status = "okay";
compatible = "marvell,orion-nand";
reg = <MBUS_ID(0x01, 0x1e) 0 0x400>;
cle = <0>;
ale = <1>;
bank-width = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uImage@0 { /* 4 MB */
reg = <0 0x400000>;
read-only;
};
rootfs@400000 { /* 64 MB */
reg = <0x400000 0x4000000>;
read-only;
};
extra@4400000 { /* 188 MB */
reg = <0x4400000 0xBC00000>;
read-only;
};
};
};
&hdd_power {
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
};
&usb_power {
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
&sata {
nr-ports = <2>;
};
&ehci1 {
status = "okay";
};
Codebase Browser
linux