// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2016 NXP Semiconductors.
* Author: Fabio Estevam <[email protected]>
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "imx7s.dtsi"
/ {
model = "Element14 Warp i.MX7 Board";
compatible = "element14,imx7s-warp", "fsl,imx7s";
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>;
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&pinctrl_gpio>;
autorepeat;
back {
label = "Back";
gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_BACK>;
wakeup-source;
};
};
reg_brcm: regulator-brcm {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_brcm_reg>;
regulator-name = "brcm_reg";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <200000>;
};
reg_bt: regulator-bt {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_bt_reg>;
enable-active-high;
gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
regulator-name = "bt_reg";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_peri_3p15v: regulator-peri-3p15v {
compatible = "regulator-fixed";
regulator-name = "peri_3p15v_reg";
regulator-min-microvolt = <3150000>;
regulator-max-microvolt = <3150000>;
regulator-always-on;
};
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "imx7-sgtl5000";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&dailink_master>;
simple-audio-card,frame-master = <&dailink_master>;
simple-audio-card,cpu {
sound-dai = <&sai1>;
};
dailink_master: simple-audio-card,codec {
sound-dai = <&codec>;
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
};
};
};
&clks {
assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
assigned-clock-rates = <884736000>;
};
&csi {
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pmic: pmic@8 {
compatible = "fsl,pfuze3000";
reg = <0x08>;
regulators {
sw1a_reg: sw1a {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1475000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
/* use sw1c_reg to align with pfuze100/pfuze200 */
sw1c_reg: sw1b {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1475000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw2_reg: sw2 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1850000>;
regulator-boot-on;
regulator-always-on;
};
sw3a_reg: sw3 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1650000>;
regulator-boot-on;
regulator-always-on;
};
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
regulator-boot-on;
regulator-always-on;
};
snvs_reg: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
vref_reg: vrefddr {
regulator-boot-on;
regulator-always-on;
};
vgen1_reg: vldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen2_reg: vldo2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vgen3_reg: vccsd {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen4_reg: v33 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen5_reg: vldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen6_reg: vldo4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
ov2680: camera@36 {
compatible = "ovti,ov2680";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ov2680>;
reg = <0x36>;
clocks = <&osc>;
clock-names = "xvclk";
reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
DOVDD-supply = <&sw2_reg>;
DVDD-supply = <&sw2_reg>;
AVDD-supply = <®_peri_3p15v>;
port {
ov2680_to_mipi: endpoint {
remote-endpoint = <&mipi_from_sensor>;
clock-lanes = <0>;
data-lanes = <1>;
link-frequencies = /bits/ 64 <330000000>;
};
};
};
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
&i2c4 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
codec: sgtl5000@a {
#sound-dai-cells = <0>;
reg = <0x0a>;
compatible = "fsl,sgtl5000";
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1_mclk>;
VDDA-supply = <&vgen4_reg>;
VDDIO-supply = <&vgen4_reg>;
VDDD-supply = <&vgen2_reg>;
};
mpl3115@60 {
compatible = "fsl,mpl3115";
reg = <0x60>;
};
};
&mipi_csi {
clock-frequency = <166000000>;
status = "okay";
ports {
port@0 {
reg = <0>;
mipi_from_sensor: endpoint {
remote-endpoint = <&ov2680_to_mipi>;
data-lanes = <1>;
};
};
};
};
&sai1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1>;
assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
<&clks IMX7D_SAI1_ROOT_CLK>;
assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
assigned-clock-rates = <0>, <36864000>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
uart-has-rtscts;
status = "okay";
};
&uart6 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart6>;
assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
fsl,dte-mode;
status = "okay";
};
&usbotg1 {
dr_mode = "peripheral";
status = "okay";
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <4>;
keep-power-in-suspend;
no-1-8-v;
non-removable;
vmmc-supply = <®_brcm>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
assigned-clock-rates = <400000000>;
bus-width = <8>;
no-1-8-v;
fsl,tuning-step = <2>;
non-removable;
status = "okay";
};
&video_mux {
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl_brcm_reg: brcmreggrp {
fsl,pins = <
MX7D_PAD_SD2_WP__GPIO5_IO10 0x14 /* WL_REG_ON */
>;
};
pinctrl_bt_reg: btreggrp {
fsl,pins = <
MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* BT_REG_ON */
>;
};
pinctrl_gpio: gpiogrp {
fsl,pins = <
MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1 0x14
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
>;
};
pinctrl_ov2680: ov2660grp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x14
>;
};
pinctrl_sai1: sai1grp {
fsl,pins = <
MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1f
MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x1f
MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f
MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x30
>;
};
pinctrl_sai1_mclk: sai1mclkgrp {
fsl,pins = <
MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x79
MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x79
MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x79
MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x79
>;
};
pinctrl_uart6: uart6grp {
fsl,pins = <
MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX 0x79
MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX 0x79
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX7D_PAD_SD1_CMD__SD1_CMD 0x59
MX7D_PAD_SD1_CLK__SD1_CLK 0x19
MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* WL_HOST_WAKE */
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x59
MX7D_PAD_SD3_CLK__SD3_CLK 0x19
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x19
>;
};
pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x1a
>;
};
pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x1b
>;
};
};
&iomuxc_lpsr {
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
>;
};
};
Codebase Browser
linux