// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Actions Semi S500 SoC
*
* Copyright (c) 2016-2017 Andreas Färber
*/
#include <dt-bindings/clock/actions,s500-cmu.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/owl-s500-powergate.h>
#include <dt-bindings/reset/actions,s500-reset.h>
/ {
compatible = "actions,s500";
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
aliases {
};
chosen {
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x0>;
enable-method = "actions,s500-smp";
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x1>;
enable-method = "actions,s500-smp";
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x2>;
enable-method = "actions,s500-smp";
power-domains = <&sps S500_PD_CPU2>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x3>;
enable-method = "actions,s500-smp";
power-domains = <&sps S500_PD_CPU3>;
};
};
arm-pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
hosc: hosc {
compatible = "fixed-clock";
clock-frequency = <24000000>;
#clock-cells = <0>;
};
losc: losc {
compatible = "fixed-clock";
clock-frequency = <32768>;
#clock-cells = <0>;
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
scu: scu@b0020000 {
compatible = "arm,cortex-a9-scu";
reg = <0xb0020000 0x100>;
};
global_timer: timer@b0020200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0xb0020200 0x100>;
interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
status = "disabled";
};
twd_timer: timer@b0020600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xb0020600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
status = "disabled";
};
twd_wdt: wdt@b0020620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0xb0020620 0xe0>;
interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
status = "disabled";
};
gic: interrupt-controller@b0021000 {
compatible = "arm,cortex-a9-gic";
reg = <0xb0021000 0x1000>,
<0xb0020100 0x0100>;
interrupt-controller;
#interrupt-cells = <3>;
};
l2: cache-controller@b0022000 {
compatible = "arm,pl310-cache";
reg = <0xb0022000 0x1000>;
cache-unified;
cache-level = <2>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
arm,tag-latency = <3 3 2>;
arm,data-latency = <5 3 3>;
};
uart0: serial@b0120000 {
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb0120000 0x2000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART0>;
status = "disabled";
};
uart1: serial@b0122000 {
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb0122000 0x2000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART1>;
status = "disabled";
};
uart2: serial@b0124000 {
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb0124000 0x2000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART2>;
status = "disabled";
};
uart3: serial@b0126000 {
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb0126000 0x2000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART3>;
status = "disabled";
};
uart4: serial@b0128000 {
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb0128000 0x2000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART4>;
status = "disabled";
};
uart5: serial@b012a000 {
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb012a000 0x2000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART5>;
status = "disabled";
};
uart6: serial@b012c000 {
compatible = "actions,s500-uart", "actions,owl-uart";
reg = <0xb012c000 0x2000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART6>;
status = "disabled";
};
cmu: clock-controller@b0160000 {
compatible = "actions,s500-cmu";
reg = <0xb0160000 0x8000>;
clocks = <&hosc>, <&losc>;
#clock-cells = <1>;
#reset-cells = <1>;
};
i2c0: i2c@b0170000 {
compatible = "actions,s500-i2c";
reg = <0xb0170000 0x4000>;
clocks = <&cmu CLK_I2C0>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@b0174000 {
compatible = "actions,s500-i2c";
reg = <0xb0174000 0x4000>;
clocks = <&cmu CLK_I2C1>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c2: i2c@b0178000 {
compatible = "actions,s500-i2c";
reg = <0xb0178000 0x4000>;
clocks = <&cmu CLK_I2C2>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c3: i2c@b017c000 {
compatible = "actions,s500-i2c";
reg = <0xb017c000 0x4000>;
clocks = <&cmu CLK_I2C3>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
sirq: interrupt-controller@b01b0200 {
compatible = "actions,s500-sirq";
reg = <0xb01b0200 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ0 */
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ1 */
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; /* SIRQ2 */
};
timer: timer@b0168000 {
compatible = "actions,s500-timer";
reg = <0xb0168000 0x8000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "2hz0", "2hz1", "timer0", "timer1";
};
sps: power-controller@b01b0100 {
compatible = "actions,s500-sps";
reg = <0xb01b0100 0x100>;
#power-domain-cells = <1>;
};
pinctrl: pinctrl@b01b0000 {
compatible = "actions,s500-pinctrl";
reg = <0xb01b0000 0x40>, /* GPIO */
<0xb01b0040 0x10>, /* Multiplexing Control */
<0xb01b0060 0x18>, /* PAD Control */
<0xb01b0080 0xc>; /* PAD Drive Capacity */
clocks = <&cmu CLK_GPIO>;
gpio-controller;
gpio-ranges = <&pinctrl 0 0 132>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* GPIOA */
<GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* GPIOB */
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* GPIOC */
<GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, /* GPIOD */
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; /* GPIOE */
};
dma: dma-controller@b0260000 {
compatible = "actions,s500-dma";
reg = <0xb0260000 0xd00>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
dma-channels = <12>;
dma-requests = <46>;
clocks = <&cmu CLK_DMAC>;
power-domains = <&sps S500_PD_DMA>;
};
mmc0: mmc@b0230000 {
compatible = "actions,s500-mmc", "actions,owl-mmc";
reg = <0xb0230000 0x38>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SD0>;
resets = <&cmu RESET_SD0>;
dmas = <&dma 2>;
dma-names = "mmc";
status = "disabled";
};
mmc1: mmc@b0234000 {
compatible = "actions,s500-mmc", "actions,owl-mmc";
reg = <0xb0234000 0x38>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SD1>;
resets = <&cmu RESET_SD1>;
dmas = <&dma 3>;
dma-names = "mmc";
status = "disabled";
};
mmc2: mmc@b0238000 {
compatible = "actions,s500-mmc", "actions,owl-mmc";
reg = <0xb0238000 0x38>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SD2>;
resets = <&cmu RESET_SD2>;
dmas = <&dma 4>;
dma-names = "mmc";
status = "disabled";
};
ethernet: ethernet@b0310000 {
compatible = "actions,s500-emac", "actions,owl-emac";
reg = <0xb0310000 0x10000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_ETHERNET>, <&cmu CLK_RMII_REF>;
clock-names = "eth", "rmii";
resets = <&cmu RESET_ETHERNET>;
status = "disabled";
};
};
};
Codebase Browser
linux