// SPDX-License-Identifier: GPL-2.0+
#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
/ {
model = "Aspeed BMC";
compatible = "aspeed,ast2500";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&vic>;
aliases {
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
i2c7 = &i2c7;
i2c8 = &i2c8;
i2c9 = &i2c9;
i2c10 = &i2c10;
i2c11 = &i2c11;
i2c12 = &i2c12;
i2c13 = &i2c13;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
serial5 = &vuart;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,arm1176jzf-s";
device_type = "cpu";
reg = <0>;
};
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0>;
};
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
fmc: spi@1e620000 {
reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-fmc";
clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
interrupts = <19>;
flash@0 {
reg = < 0 >;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
spi-rx-bus-width = <2>;
status = "disabled";
};
flash@1 {
reg = < 1 >;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
spi-rx-bus-width = <2>;
status = "disabled";
};
flash@2 {
reg = < 2 >;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
spi-rx-bus-width = <2>;
status = "disabled";
};
};
spi1: spi@1e630000 {
reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-spi";
clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
flash@0 {
reg = < 0 >;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
spi-rx-bus-width = <2>;
status = "disabled";
};
flash@1 {
reg = < 1 >;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
spi-rx-bus-width = <2>;
status = "disabled";
};
};
spi2: spi@1e631000 {
reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-spi";
clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
flash@0 {
reg = < 0 >;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
spi-rx-bus-width = <2>;
status = "disabled";
};
flash@1 {
reg = < 1 >;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
spi-rx-bus-width = <2>;
status = "disabled";
};
};
vic: interrupt-controller@1e6c0080 {
compatible = "aspeed,ast2400-vic";
interrupt-controller;
#interrupt-cells = <1>;
valid-sources = <0xfefff7ff 0x0807ffff>;
reg = <0x1e6c0080 0x80>;
};
cvic: copro-interrupt-controller@1e6c2000 {
compatible = "aspeed,ast2500-cvic", "aspeed-cvic";
valid-sources = <0xffffffff>;
copro-sw-interrupts = <1>;
reg = <0x1e6c2000 0x80>;
};
mac0: ethernet@1e660000 {
compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
reg = <0x1e660000 0x180>;
interrupts = <2>;
clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
status = "disabled";
};
mac1: ethernet@1e680000 {
compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
reg = <0x1e680000 0x180>;
interrupts = <3>;
clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
status = "disabled";
};
ehci0: usb@1e6a1000 {
compatible = "aspeed,ast2500-ehci", "generic-ehci";
reg = <0x1e6a1000 0x100>;
interrupts = <5>;
clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2ah_default>;
status = "disabled";
};
ehci1: usb@1e6a3000 {
compatible = "aspeed,ast2500-ehci", "generic-ehci";
reg = <0x1e6a3000 0x100>;
interrupts = <13>;
clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2bh_default>;
status = "disabled";
};
uhci: usb@1e6b0000 {
compatible = "aspeed,ast2500-uhci", "generic-uhci";
reg = <0x1e6b0000 0x100>;
interrupts = <14>;
#ports = <2>;
clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
status = "disabled";
/*
* No default pinmux, it will follow EHCI, use an explicit pinmux
* override if you don't enable EHCI
*/
};
vhub: usb-vhub@1e6a0000 {
compatible = "aspeed,ast2500-usb-vhub";
reg = <0x1e6a0000 0x300>;
interrupts = <5>;
clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
aspeed,vhub-downstream-ports = <5>;
aspeed,vhub-generic-endpoints = <15>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2ad_default>;
status = "disabled";
};
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
edac: memory-controller@1e6e0000 {
compatible = "aspeed,ast2500-sdram-edac";
reg = <0x1e6e0000 0x174>;
interrupts = <0>;
status = "disabled";
};
syscon: syscon@1e6e2000 {
compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1e6e2000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
scu_ic: interrupt-controller@18 {
#interrupt-cells = <1>;
compatible = "aspeed,ast2500-scu-ic";
reg = <0x18 0x4>;
interrupts = <21>;
interrupt-controller;
};
p2a: p2a-control@2c {
compatible = "aspeed,ast2500-p2a-ctrl";
reg = <0x2c 0x4>;
status = "disabled";
};
silicon-id@7c {
compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
reg = <0x7c 0x4 0x150 0x8>;
};
pinctrl: pinctrl@80 {
compatible = "aspeed,ast2500-pinctrl";
reg = <0x80 0x18>, <0xa0 0x10>;
aspeed,external-nodes = <&gfx>, <&lhc>;
};
};
rng: hwrng@1e6e2078 {
compatible = "timeriomem_rng";
reg = <0x1e6e2078 0x4>;
period = <1>;
quality = <100>;
};
hace: crypto@1e6e3000 {
compatible = "aspeed,ast2500-hace";
reg = <0x1e6e3000 0x100>;
interrupts = <4>;
clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
resets = <&syscon ASPEED_RESET_HACE>;
};
gfx: display@1e6e6000 {
compatible = "aspeed,ast2500-gfx", "syscon";
reg = <0x1e6e6000 0x1000>;
reg-io-width = <4>;
clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
resets = <&syscon ASPEED_RESET_CRT1>;
syscon = <&syscon>;
status = "disabled";
interrupts = <0x19>;
};
xdma: xdma@1e6e7000 {
compatible = "aspeed,ast2500-xdma";
reg = <0x1e6e7000 0x100>;
clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
resets = <&syscon ASPEED_RESET_XDMA>;
interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>;
aspeed,pcie-device = "bmc";
aspeed,scu = <&syscon>;
status = "disabled";
};
adc: adc@1e6e9000 {
compatible = "aspeed,ast2500-adc";
reg = <0x1e6e9000 0xb0>;
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_ADC>;
#io-channel-cells = <1>;
status = "disabled";
};
video: video@1e700000 {
compatible = "aspeed,ast2500-video-engine";
reg = <0x1e700000 0x1000>;
clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
<&syscon ASPEED_CLK_GATE_ECLK>;
clock-names = "vclk", "eclk";
interrupts = <7>;
status = "disabled";
};
sram: sram@1e720000 {
compatible = "mmio-sram";
reg = <0x1e720000 0x9000>; // 36K
};
sdmmc: sd-controller@1e740000 {
compatible = "aspeed,ast2500-sd-controller";
reg = <0x1e740000 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1e740000 0x10000>;
clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
status = "disabled";
sdhci0: sdhci@100 {
compatible = "aspeed,ast2500-sdhci";
reg = <0x100 0x100>;
interrupts = <26>;
sdhci,auto-cmd12;
clocks = <&syscon ASPEED_CLK_SDIO>;
status = "disabled";
};
sdhci1: sdhci@200 {
compatible = "aspeed,ast2500-sdhci";
reg = <0x200 0x100>;
interrupts = <26>;
sdhci,auto-cmd12;
clocks = <&syscon ASPEED_CLK_SDIO>;
status = "disabled";
};
};
gpio: gpio@1e780000 {
#gpio-cells = <2>;
gpio-controller;
compatible = "aspeed,ast2500-gpio";
reg = <0x1e780000 0x200>;
interrupts = <20>;
gpio-ranges = <&pinctrl 0 0 232>;
clocks = <&syscon ASPEED_CLK_APB>;
interrupt-controller;
#interrupt-cells = <2>;
};
sgpio: sgpio@1e780200 {
#gpio-cells = <2>;
compatible = "aspeed,ast2500-sgpio";
gpio-controller;
interrupts = <40>;
reg = <0x1e780200 0x0100>;
clocks = <&syscon ASPEED_CLK_APB>;
#interrupt-cells = <2>;
interrupt-controller;
bus-frequency = <12000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgpm_default>;
status = "disabled";
};
rtc: rtc@1e781000 {
compatible = "aspeed,ast2500-rtc";
reg = <0x1e781000 0x18>;
status = "disabled";
};
timer: timer@1e782000 {
/* This timer is a Faraday FTTMR010 derivative */
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
interrupts = <16 17 18 35 36 37 38 39>;
clocks = <&syscon ASPEED_CLK_APB>;
clock-names = "PCLK";
};
uart1: serial@1e783000 {
compatible = "ns16550a";
reg = <0x1e783000 0x20>;
reg-shift = <2>;
interrupts = <9>;
clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
resets = <&lpc_reset 4>;
no-loopback-test;
status = "disabled";
};
uart5: serial@1e784000 {
compatible = "ns16550a";
reg = <0x1e784000 0x20>;
reg-shift = <2>;
interrupts = <10>;
clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
no-loopback-test;
status = "disabled";
};
wdt1: watchdog@1e785000 {
compatible = "aspeed,ast2500-wdt";
reg = <0x1e785000 0x20>;
clocks = <&syscon ASPEED_CLK_APB>;
};
wdt2: watchdog@1e785020 {
compatible = "aspeed,ast2500-wdt";
reg = <0x1e785020 0x20>;
clocks = <&syscon ASPEED_CLK_APB>;
};
wdt3: watchdog@1e785040 {
compatible = "aspeed,ast2500-wdt";
reg = <0x1e785040 0x20>;
clocks = <&syscon ASPEED_CLK_APB>;
status = "disabled";
};
pwm_tacho: pwm-tacho-controller@1e786000 {
compatible = "aspeed,ast2500-pwm-tacho";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1e786000 0x1000>;
clocks = <&syscon ASPEED_CLK_24M>;
resets = <&syscon ASPEED_RESET_PWM>;
status = "disabled";
};
vuart: serial@1e787000 {
compatible = "aspeed,ast2500-vuart";
reg = <0x1e787000 0x40>;
reg-shift = <2>;
interrupts = <8>;
clocks = <&syscon ASPEED_CLK_APB>;
no-loopback-test;
status = "disabled";
};
lpc: lpc@1e789000 {
compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
reg = <0x1e789000 0x1000>;
reg-io-width = <4>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x1e789000 0x1000>;
kcs1: kcs@24 {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
interrupts = <8>;
clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
status = "disabled";
};
kcs2: kcs@28 {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
interrupts = <8>;
clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
status = "disabled";
};
kcs3: kcs@2c {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
interrupts = <8>;
clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
status = "disabled";
};
kcs4: kcs@114 {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
interrupts = <8>;
clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
status = "disabled";
};
lpc_ctrl: lpc-ctrl@80 {
compatible = "aspeed,ast2500-lpc-ctrl";
reg = <0x80 0x10>;
clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
status = "disabled";
};
lpc_snoop: lpc-snoop@90 {
compatible = "aspeed,ast2500-lpc-snoop";
reg = <0x90 0x8>;
interrupts = <8>;
clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
status = "disabled";
};
lpc_reset: reset-controller@98 {
compatible = "aspeed,ast2500-lpc-reset";
reg = <0x98 0x4>;
#reset-cells = <1>;
};
uart_routing: uart-routing@9c {
compatible = "aspeed,ast2500-uart-routing";
reg = <0x9c 0x4>;
status = "disabled";
};
lhc: lhc@a0 {
compatible = "aspeed,ast2500-lhc";
reg = <0xa0 0x24 0xc8 0x8>;
};
ibt: ibt@140 {
compatible = "aspeed,ast2500-ibt-bmc";
reg = <0x140 0x18>;
interrupts = <8>;
clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
status = "disabled";
};
};
peci0: peci-controller@1e78b000 {
compatible = "aspeed,ast2500-peci";
reg = <0x1e78b000 0x60>;
interrupts = <15>;
clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
resets = <&syscon ASPEED_RESET_PECI>;
cmd-timeout-ms = <1000>;
clock-frequency = <1000000>;
status = "disabled";
};
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
reg-shift = <2>;
interrupts = <32>;
clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
resets = <&lpc_reset 5>;
no-loopback-test;
status = "disabled";
};
uart3: serial@1e78e000 {
compatible = "ns16550a";
reg = <0x1e78e000 0x20>;
reg-shift = <2>;
interrupts = <33>;
clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
resets = <&lpc_reset 6>;
no-loopback-test;
status = "disabled";
};
uart4: serial@1e78f000 {
compatible = "ns16550a";
reg = <0x1e78f000 0x20>;
reg-shift = <2>;
interrupts = <34>;
clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
resets = <&lpc_reset 7>;
no-loopback-test;
status = "disabled";
};
i2c: bus@1e78a000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1e78a000 0x1000>;
};
};
};
};
&i2c {
i2c_ic: interrupt-controller@0 {
#interrupt-cells = <1>;
compatible = "aspeed,ast2500-i2c-ic";
reg = <0x0 0x40>;
interrupts = <12>;
interrupt-controller;
};
i2c0: i2c@40 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <0>;
interrupt-parent = <&i2c_ic>;
status = "disabled";
/* Does not need pinctrl properties */
};
i2c1: i2c@80 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <1>;
interrupt-parent = <&i2c_ic>;
status = "disabled";
/* Does not need pinctrl properties */
};
i2c2: i2c@c0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0xc0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <2>;
interrupt-parent = <&i2c_ic>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_default>;
status = "disabled";
};
i2c3: i2c@100 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x100 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <3>;
interrupt-parent = <&i2c_ic>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4_default>;
status = "disabled";
};
i2c4: i2c@140 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x140 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <4>;
interrupt-parent = <&i2c_ic>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c5_default>;
status = "disabled";
};
i2c5: i2c@180 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x180 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <5>;
interrupt-parent = <&i2c_ic>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c6_default>;
status = "disabled";
};
i2c6: i2c@1c0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1c0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <6>;
interrupt-parent = <&i2c_ic>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c7_default>;
status = "disabled";
};
i2c7: i2c@300 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x300 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <7>;
interrupt-parent = <&i2c_ic>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c8_default>;
status = "disabled";
};
i2c8: i2c@340 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x340 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <8>;
interrupt-parent = <&i2c_ic>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c9_default>;
status = "disabled";
};
i2c9: i2c@380 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x380 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <9>;
interrupt-parent = <&i2c_ic>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c10_default>;
status = "disabled";
};
i2c10: i2c@3c0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3c0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <10>;
interrupt-parent = <&i2c_ic>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c11_default>;
status = "disabled";
};
i2c11: i2c@400 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x400 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <11>;
interrupt-parent = <&i2c_ic>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c12_default>;
status = "disabled";
};
i2c12: i2c@440 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x440 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <12>;
interrupt-parent = <&i2c_ic>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c13_default>;
status = "disabled";
};
i2c13: i2c@480 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x480 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <13>;
interrupt-parent = <&i2c_ic>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c14_default>;
status = "disabled";
};
};
&pinctrl {
pinctrl_acpi_default: acpi_default {
function = "ACPI";
groups = "ACPI";
};
pinctrl_adc0_default: adc0_default {
function = "ADC0";
groups = "ADC0";
};
pinctrl_adc1_default: adc1_default {
function = "ADC1";
groups = "ADC1";
};
pinctrl_adc10_default: adc10_default {
function = "ADC10";
groups = "ADC10";
};
pinctrl_adc11_default: adc11_default {
function = "ADC11";
groups = "ADC11";
};
pinctrl_adc12_default: adc12_default {
function = "ADC12";
groups = "ADC12";
};
pinctrl_adc13_default: adc13_default {
function = "ADC13";
groups = "ADC13";
};
pinctrl_adc14_default: adc14_default {
function = "ADC14";
groups = "ADC14";
};
pinctrl_adc15_default: adc15_default {
function = "ADC15";
groups = "ADC15";
};
pinctrl_adc2_default: adc2_default {
function = "ADC2";
groups = "ADC2";
};
pinctrl_adc3_default: adc3_default {
function = "ADC3";
groups = "ADC3";
};
pinctrl_adc4_default: adc4_default {
function = "ADC4";
groups = "ADC4";
};
pinctrl_adc5_default: adc5_default {
function = "ADC5";
groups = "ADC5";
};
pinctrl_adc6_default: adc6_default {
function = "ADC6";
groups = "ADC6";
};
pinctrl_adc7_default: adc7_default {
function = "ADC7";
groups = "ADC7";
};
pinctrl_adc8_default: adc8_default {
function = "ADC8";
groups = "ADC8";
};
pinctrl_adc9_default: adc9_default {
function = "ADC9";
groups = "ADC9";
};
pinctrl_bmcint_default: bmcint_default {
function = "BMCINT";
groups = "BMCINT";
};
pinctrl_ddcclk_default: ddcclk_default {
function = "DDCCLK";
groups = "DDCCLK";
};
pinctrl_ddcdat_default: ddcdat_default {
function = "DDCDAT";
groups = "DDCDAT";
};
pinctrl_espi_default: espi_default {
function = "ESPI";
groups = "ESPI";
};
pinctrl_fwspics1_default: fwspics1_default {
function = "FWSPICS1";
groups = "FWSPICS1";
};
pinctrl_fwspics2_default: fwspics2_default {
function = "FWSPICS2";
groups = "FWSPICS2";
};
pinctrl_gpid0_default: gpid0_default {
function = "GPID0";
groups = "GPID0";
};
pinctrl_gpid2_default: gpid2_default {
function = "GPID2";
groups = "GPID2";
};
pinctrl_gpid4_default: gpid4_default {
function = "GPID4";
groups = "GPID4";
};
pinctrl_gpid6_default: gpid6_default {
function = "GPID6";
groups = "GPID6";
};
pinctrl_gpie0_default: gpie0_default {
function = "GPIE0";
groups = "GPIE0";
};
pinctrl_gpie2_default: gpie2_default {
function = "GPIE2";
groups = "GPIE2";
};
pinctrl_gpie4_default: gpie4_default {
function = "GPIE4";
groups = "GPIE4";
};
pinctrl_gpie6_default: gpie6_default {
function = "GPIE6";
groups = "GPIE6";
};
pinctrl_i2c10_default: i2c10_default {
function = "I2C10";
groups = "I2C10";
};
pinctrl_i2c11_default: i2c11_default {
function = "I2C11";
groups = "I2C11";
};
pinctrl_i2c12_default: i2c12_default {
function = "I2C12";
groups = "I2C12";
};
pinctrl_i2c13_default: i2c13_default {
function = "I2C13";
groups = "I2C13";
};
pinctrl_i2c14_default: i2c14_default {
function = "I2C14";
groups = "I2C14";
};
pinctrl_i2c3_default: i2c3_default {
function = "I2C3";
groups = "I2C3";
};
pinctrl_i2c4_default: i2c4_default {
function = "I2C4";
groups = "I2C4";
};
pinctrl_i2c5_default: i2c5_default {
function = "I2C5";
groups = "I2C5";
};
pinctrl_i2c6_default: i2c6_default {
function = "I2C6";
groups = "I2C6";
};
pinctrl_i2c7_default: i2c7_default {
function = "I2C7";
groups = "I2C7";
};
pinctrl_i2c8_default: i2c8_default {
function = "I2C8";
groups = "I2C8";
};
pinctrl_i2c9_default: i2c9_default {
function = "I2C9";
groups = "I2C9";
};
pinctrl_lad0_default: lad0_default {
function = "LAD0";
groups = "LAD0";
};
pinctrl_lad1_default: lad1_default {
function = "LAD1";
groups = "LAD1";
};
pinctrl_lad2_default: lad2_default {
function = "LAD2";
groups = "LAD2";
};
pinctrl_lad3_default: lad3_default {
function = "LAD3";
groups = "LAD3";
};
pinctrl_lclk_default: lclk_default {
function = "LCLK";
groups = "LCLK";
};
pinctrl_lframe_default: lframe_default {
function = "LFRAME";
groups = "LFRAME";
};
pinctrl_lpchc_default: lpchc_default {
function = "LPCHC";
groups = "LPCHC";
};
pinctrl_lpcpd_default: lpcpd_default {
function = "LPCPD";
groups = "LPCPD";
};
pinctrl_lpcplus_default: lpcplus_default {
function = "LPCPLUS";
groups = "LPCPLUS";
};
pinctrl_lpcpme_default: lpcpme_default {
function = "LPCPME";
groups = "LPCPME";
};
pinctrl_lpcrst_default: lpcrst_default {
function = "LPCRST";
groups = "LPCRST";
};
pinctrl_lpcsmi_default: lpcsmi_default {
function = "LPCSMI";
groups = "LPCSMI";
};
pinctrl_lsirq_default: lsirq_default {
function = "LSIRQ";
groups = "LSIRQ";
};
pinctrl_mac1link_default: mac1link_default {
function = "MAC1LINK";
groups = "MAC1LINK";
};
pinctrl_mac2link_default: mac2link_default {
function = "MAC2LINK";
groups = "MAC2LINK";
};
pinctrl_mdio1_default: mdio1_default {
function = "MDIO1";
groups = "MDIO1";
};
pinctrl_mdio2_default: mdio2_default {
function = "MDIO2";
groups = "MDIO2";
};
pinctrl_ncts1_default: ncts1_default {
function = "NCTS1";
groups = "NCTS1";
};
pinctrl_ncts2_default: ncts2_default {
function = "NCTS2";
groups = "NCTS2";
};
pinctrl_ncts3_default: ncts3_default {
function = "NCTS3";
groups = "NCTS3";
};
pinctrl_ncts4_default: ncts4_default {
function = "NCTS4";
groups = "NCTS4";
};
pinctrl_ndcd1_default: ndcd1_default {
function = "NDCD1";
groups = "NDCD1";
};
pinctrl_ndcd2_default: ndcd2_default {
function = "NDCD2";
groups = "NDCD2";
};
pinctrl_ndcd3_default: ndcd3_default {
function = "NDCD3";
groups = "NDCD3";
};
pinctrl_ndcd4_default: ndcd4_default {
function = "NDCD4";
groups = "NDCD4";
};
pinctrl_ndsr1_default: ndsr1_default {
function = "NDSR1";
groups = "NDSR1";
};
pinctrl_ndsr2_default: ndsr2_default {
function = "NDSR2";
groups = "NDSR2";
};
pinctrl_ndsr3_default: ndsr3_default {
function = "NDSR3";
groups = "NDSR3";
};
pinctrl_ndsr4_default: ndsr4_default {
function = "NDSR4";
groups = "NDSR4";
};
pinctrl_ndtr1_default: ndtr1_default {
function = "NDTR1";
groups = "NDTR1";
};
pinctrl_ndtr2_default: ndtr2_default {
function = "NDTR2";
groups = "NDTR2";
};
pinctrl_ndtr3_default: ndtr3_default {
function = "NDTR3";
groups = "NDTR3";
};
pinctrl_ndtr4_default: ndtr4_default {
function = "NDTR4";
groups = "NDTR4";
};
pinctrl_nri1_default: nri1_default {
function = "NRI1";
groups = "NRI1";
};
pinctrl_nri2_default: nri2_default {
function = "NRI2";
groups = "NRI2";
};
pinctrl_nri3_default: nri3_default {
function = "NRI3";
groups = "NRI3";
};
pinctrl_nri4_default: nri4_default {
function = "NRI4";
groups = "NRI4";
};
pinctrl_nrts1_default: nrts1_default {
function = "NRTS1";
groups = "NRTS1";
};
pinctrl_nrts2_default: nrts2_default {
function = "NRTS2";
groups = "NRTS2";
};
pinctrl_nrts3_default: nrts3_default {
function = "NRTS3";
groups = "NRTS3";
};
pinctrl_nrts4_default: nrts4_default {
function = "NRTS4";
groups = "NRTS4";
};
pinctrl_oscclk_default: oscclk_default {
function = "OSCCLK";
groups = "OSCCLK";
};
pinctrl_pewake_default: pewake_default {
function = "PEWAKE";
groups = "PEWAKE";
};
pinctrl_pnor_default: pnor_default {
function = "PNOR";
groups = "PNOR";
};
pinctrl_pwm0_default: pwm0_default {
function = "PWM0";
groups = "PWM0";
};
pinctrl_pwm1_default: pwm1_default {
function = "PWM1";
groups = "PWM1";
};
pinctrl_pwm2_default: pwm2_default {
function = "PWM2";
groups = "PWM2";
};
pinctrl_pwm3_default: pwm3_default {
function = "PWM3";
groups = "PWM3";
};
pinctrl_pwm4_default: pwm4_default {
function = "PWM4";
groups = "PWM4";
};
pinctrl_pwm5_default: pwm5_default {
function = "PWM5";
groups = "PWM5";
};
pinctrl_pwm6_default: pwm6_default {
function = "PWM6";
groups = "PWM6";
};
pinctrl_pwm7_default: pwm7_default {
function = "PWM7";
groups = "PWM7";
};
pinctrl_rgmii1_default: rgmii1_default {
function = "RGMII1";
groups = "RGMII1";
};
pinctrl_rgmii2_default: rgmii2_default {
function = "RGMII2";
groups = "RGMII2";
};
pinctrl_rmii1_default: rmii1_default {
function = "RMII1";
groups = "RMII1";
};
pinctrl_rmii2_default: rmii2_default {
function = "RMII2";
groups = "RMII2";
};
pinctrl_rxd1_default: rxd1_default {
function = "RXD1";
groups = "RXD1";
};
pinctrl_rxd2_default: rxd2_default {
function = "RXD2";
groups = "RXD2";
};
pinctrl_rxd3_default: rxd3_default {
function = "RXD3";
groups = "RXD3";
};
pinctrl_rxd4_default: rxd4_default {
function = "RXD4";
groups = "RXD4";
};
pinctrl_salt1_default: salt1_default {
function = "SALT1";
groups = "SALT1";
};
pinctrl_salt10_default: salt10_default {
function = "SALT10";
groups = "SALT10";
};
pinctrl_salt11_default: salt11_default {
function = "SALT11";
groups = "SALT11";
};
pinctrl_salt12_default: salt12_default {
function = "SALT12";
groups = "SALT12";
};
pinctrl_salt13_default: salt13_default {
function = "SALT13";
groups = "SALT13";
};
pinctrl_salt14_default: salt14_default {
function = "SALT14";
groups = "SALT14";
};
pinctrl_salt2_default: salt2_default {
function = "SALT2";
groups = "SALT2";
};
pinctrl_salt3_default: salt3_default {
function = "SALT3";
groups = "SALT3";
};
pinctrl_salt4_default: salt4_default {
function = "SALT4";
groups = "SALT4";
};
pinctrl_salt5_default: salt5_default {
function = "SALT5";
groups = "SALT5";
};
pinctrl_salt6_default: salt6_default {
function = "SALT6";
groups = "SALT6";
};
pinctrl_salt7_default: salt7_default {
function = "SALT7";
groups = "SALT7";
};
pinctrl_salt8_default: salt8_default {
function = "SALT8";
groups = "SALT8";
};
pinctrl_salt9_default: salt9_default {
function = "SALT9";
groups = "SALT9";
};
pinctrl_scl1_default: scl1_default {
function = "SCL1";
groups = "SCL1";
};
pinctrl_scl2_default: scl2_default {
function = "SCL2";
groups = "SCL2";
};
pinctrl_sd1_default: sd1_default {
function = "SD1";
groups = "SD1";
};
pinctrl_sd2_default: sd2_default {
function = "SD2";
groups = "SD2";
};
pinctrl_sda1_default: sda1_default {
function = "SDA1";
groups = "SDA1";
};
pinctrl_sda2_default: sda2_default {
function = "SDA2";
groups = "SDA2";
};
pinctrl_sgpm_default: sgpm_default {
function = "SGPM";
groups = "SGPM";
};
pinctrl_sgps1_default: sgps1_default {
function = "SGPS1";
groups = "SGPS1";
};
pinctrl_sgps2_default: sgps2_default {
function = "SGPS2";
groups = "SGPS2";
};
pinctrl_sioonctrl_default: sioonctrl_default {
function = "SIOONCTRL";
groups = "SIOONCTRL";
};
pinctrl_siopbi_default: siopbi_default {
function = "SIOPBI";
groups = "SIOPBI";
};
pinctrl_siopbo_default: siopbo_default {
function = "SIOPBO";
groups = "SIOPBO";
};
pinctrl_siopwreq_default: siopwreq_default {
function = "SIOPWREQ";
groups = "SIOPWREQ";
};
pinctrl_siopwrgd_default: siopwrgd_default {
function = "SIOPWRGD";
groups = "SIOPWRGD";
};
pinctrl_sios3_default: sios3_default {
function = "SIOS3";
groups = "SIOS3";
};
pinctrl_sios5_default: sios5_default {
function = "SIOS5";
groups = "SIOS5";
};
pinctrl_siosci_default: siosci_default {
function = "SIOSCI";
groups = "SIOSCI";
};
pinctrl_spi1_default: spi1_default {
function = "SPI1";
groups = "SPI1";
};
pinctrl_spi1cs1_default: spi1cs1_default {
function = "SPI1CS1";
groups = "SPI1CS1";
};
pinctrl_spi1debug_default: spi1debug_default {
function = "SPI1DEBUG";
groups = "SPI1DEBUG";
};
pinctrl_spi1passthru_default: spi1passthru_default {
function = "SPI1PASSTHRU";
groups = "SPI1PASSTHRU";
};
pinctrl_spi2ck_default: spi2ck_default {
function = "SPI2CK";
groups = "SPI2CK";
};
pinctrl_spi2cs0_default: spi2cs0_default {
function = "SPI2CS0";
groups = "SPI2CS0";
};
pinctrl_spi2cs1_default: spi2cs1_default {
function = "SPI2CS1";
groups = "SPI2CS1";
};
pinctrl_spi2miso_default: spi2miso_default {
function = "SPI2MISO";
groups = "SPI2MISO";
};
pinctrl_spi2mosi_default: spi2mosi_default {
function = "SPI2MOSI";
groups = "SPI2MOSI";
};
pinctrl_timer3_default: timer3_default {
function = "TIMER3";
groups = "TIMER3";
};
pinctrl_timer4_default: timer4_default {
function = "TIMER4";
groups = "TIMER4";
};
pinctrl_timer5_default: timer5_default {
function = "TIMER5";
groups = "TIMER5";
};
pinctrl_timer6_default: timer6_default {
function = "TIMER6";
groups = "TIMER6";
};
pinctrl_timer7_default: timer7_default {
function = "TIMER7";
groups = "TIMER7";
};
pinctrl_timer8_default: timer8_default {
function = "TIMER8";
groups = "TIMER8";
};
pinctrl_txd1_default: txd1_default {
function = "TXD1";
groups = "TXD1";
};
pinctrl_txd2_default: txd2_default {
function = "TXD2";
groups = "TXD2";
};
pinctrl_txd3_default: txd3_default {
function = "TXD3";
groups = "TXD3";
};
pinctrl_txd4_default: txd4_default {
function = "TXD4";
groups = "TXD4";
};
pinctrl_uart6_default: uart6_default {
function = "UART6";
groups = "UART6";
};
pinctrl_usbcki_default: usbcki_default {
function = "USBCKI";
groups = "USBCKI";
};
pinctrl_usb2ah_default: usb2ah_default {
function = "USB2AH";
groups = "USB2AH";
};
pinctrl_usb2ad_default: usb2ad_default {
function = "USB2AD";
groups = "USB2AD";
};
pinctrl_usb11bhid_default: usb11bhid_default {
function = "USB11BHID";
groups = "USB11BHID";
};
pinctrl_usb2bh_default: usb2bh_default {
function = "USB2BH";
groups = "USB2BH";
};
pinctrl_vgabiosrom_default: vgabiosrom_default {
function = "VGABIOSROM";
groups = "VGABIOSROM";
};
pinctrl_vgahs_default: vgahs_default {
function = "VGAHS";
groups = "VGAHS";
};
pinctrl_vgavs_default: vgavs_default {
function = "VGAVS";
groups = "VGAVS";
};
pinctrl_vpi24_default: vpi24_default {
function = "VPI24";
groups = "VPI24";
};
pinctrl_vpo_default: vpo_default {
function = "VPO";
groups = "VPO";
};
pinctrl_wdtrst1_default: wdtrst1_default {
function = "WDTRST1";
groups = "WDTRST1";
};
pinctrl_wdtrst2_default: wdtrst2_default {
function = "WDTRST2";
groups = "WDTRST2";
};
};
Codebase Browser
linux