linux/arch/arm/boot/dts/microchip/sama5d3.dtsi

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
 *                applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC
 *
 *  Copyright (C) 2013 Atmel,
 *                2013 Ludovic Desroches <[email protected]>
 */

#include <dt-bindings/dma/at91.h>
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/at91.h>
#include <dt-bindings/mfd/at91-usart.h>

/ {
	#address-cells = <1>;
	#size-cells = <1>;
	model = "Atmel SAMA5D3 family SoC";
	compatible = "atmel,sama5d3", "atmel,sama5";
	interrupt-parent = <&aic>;

	aliases {
		serial0 = &dbgu;
		serial1 = &usart0;
		serial2 = &usart1;
		serial3 = &usart2;
		serial4 = &usart3;
		serial5 = &uart0;
		gpio0 = &pioA;
		gpio1 = &pioB;
		gpio2 = &pioC;
		gpio3 = &pioD;
		gpio4 = &pioE;
		tcb0 = &tcb0;
		i2c0 = &i2c0;
		i2c1 = &i2c1;
		i2c2 = &i2c2;
		ssc0 = &ssc0;
		ssc1 = &ssc1;
		pwm0 = &pwm0;
	};
	cpus {
		#address-cells = <1>;
		#size-cells = <0>;
		cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a5";
			reg = <0x0>;
		};
	};

	pmu {
		compatible = "arm,cortex-a5-pmu";
		interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>;
	};

	memory@20000000 {
		device_type = "memory";
		reg = <0x20000000 0x8000000>;
	};

	clocks {
		slow_xtal: slow_xtal {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <0>;
		};

		main_xtal: main_xtal {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <0>;
		};

		adc_op_clk: adc_op_clk {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <1000000>;
		};
	};

	sram: sram@300000 {
		compatible = "mmio-sram";
		reg = <0x00300000 0x20000>;
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0 0x00300000 0x20000>;
	};

	ahb {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		apb {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			mmc0: mmc@f0000000 {
				compatible = "atmel,hsmci";
				reg = <0xf0000000 0x600>;
				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>;
				dma-names = "rxtx";
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
				status = "disabled";
				#address-cells = <1>;
				#size-cells = <0>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
				clock-names = "mci_clk";
			};

			spi0: spi@f0004000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "atmel,at91rm9200-spi";
				reg = <0xf0004000 0x100>;
				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>,
				       <&dma0 2 AT91_DMA_CFG_PER_ID(2)>;
				dma-names = "tx", "rx";
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_spi0>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
				clock-names = "spi_clk";
				status = "disabled";
			};

			ssc0: ssc@f0008000 {
				compatible = "atmel,at91sam9g45-ssc";
				reg = <0xf0008000 0x4000>;
				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>,
				       <&dma0 2 AT91_DMA_CFG_PER_ID(14)>;
				dma-names = "tx", "rx";
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
				clock-names = "pclk";
				status = "disabled";
			};

			tcb0: timer@f0010000 {
				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0xf0010000 0x100>;
				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&clk32k>;
				clock-names = "t0_clk", "slow_clk";
			};

			i2c0: i2c@f0014000 {
				compatible = "atmel,at91sam9x5-i2c";
				reg = <0xf0014000 0x4000>;
				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>;
				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
				       <&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
				dma-names = "tx", "rx";
				pinctrl-names = "default", "gpio";
				pinctrl-0 = <&pinctrl_i2c0>;
				pinctrl-1 = <&pinctrl_i2c0_gpio>;
				sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
				scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
				#address-cells = <1>;
				#size-cells = <0>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
				status = "disabled";
			};

			i2c1: i2c@f0018000 {
				compatible = "atmel,at91sam9x5-i2c";
				reg = <0xf0018000 0x4000>;
				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>;
				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
				       <&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
				dma-names = "tx", "rx";
				pinctrl-names = "default", "gpio";
				pinctrl-0 = <&pinctrl_i2c1>;
				pinctrl-1 = <&pinctrl_i2c1_gpio>;
				sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>;
				scl-gpios = <&pioC 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
				#address-cells = <1>;
				#size-cells = <0>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
				status = "disabled";
			};

			usart0: serial@f001c000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xf001c000 0x100>;
				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
				       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
				dma-names = "tx", "rx";
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usart0>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
				clock-names = "usart";
				status = "disabled";
			};

			usart1: serial@f0020000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xf0020000 0x100>;
				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>,
				       <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
				dma-names = "tx", "rx";
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usart1>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
				clock-names = "usart";
				status = "disabled";
			};

			uart0: serial@f0024000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xf0024000 0x100>;
				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_uart0>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
				clock-names = "usart";
				status = "disabled";
			};

			pwm0: pwm@f002c000 {
				compatible = "atmel,sama5d3-pwm";
				reg = <0xf002c000 0x300>;
				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>;
				#pwm-cells = <3>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
				status = "disabled";
			};

			isi: isi@f0034000 {
				compatible = "atmel,at91sam9g45-isi";
				reg = <0xf0034000 0x4000>;
				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_isi_data_0_7>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
				clock-names = "isi_clk";
				status = "disabled";
				port {
					#address-cells = <1>;
					#size-cells = <0>;
				};
			};

			sfr: sfr@f0038000 {
				compatible = "atmel,sama5d3-sfr", "syscon";
				reg = <0xf0038000 0x60>;
			};

			mmc1: mmc@f8000000 {
				compatible = "atmel,hsmci";
				reg = <0xf8000000 0x600>;
				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>;
				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>;
				dma-names = "rxtx";
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
				status = "disabled";
				#address-cells = <1>;
				#size-cells = <0>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
				clock-names = "mci_clk";
			};

			spi1: spi@f8008000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "atmel,at91rm9200-spi";
				reg = <0xf8008000 0x100>;
				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>,
				       <&dma1 2 AT91_DMA_CFG_PER_ID(16)>;
				dma-names = "tx", "rx";
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_spi1>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
				clock-names = "spi_clk";
				status = "disabled";
			};

			ssc1: ssc@f800c000 {
				compatible = "atmel,at91sam9g45-ssc";
				reg = <0xf800c000 0x4000>;
				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>,
				       <&dma1 2 AT91_DMA_CFG_PER_ID(4)>;
				dma-names = "tx", "rx";
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
				clock-names = "pclk";
				status = "disabled";
			};

			adc0: adc@f8018000 {
				compatible = "atmel,sama5d3-adc";
				reg = <0xf8018000 0x100>;
				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
				pinctrl-names = "default";
				pinctrl-0 = <
					&pinctrl_adc0_adtrg
					&pinctrl_adc0_ad0
					&pinctrl_adc0_ad1
					&pinctrl_adc0_ad2
					&pinctrl_adc0_ad3
					&pinctrl_adc0_ad4
					&pinctrl_adc0_ad5
					&pinctrl_adc0_ad6
					&pinctrl_adc0_ad7
					&pinctrl_adc0_ad8
					&pinctrl_adc0_ad9
					&pinctrl_adc0_ad10
					&pinctrl_adc0_ad11
					>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>,
					 <&adc_op_clk>;
				clock-names = "adc_clk", "adc_op_clk";
				atmel,adc-channels-used = <0xfff>;
				atmel,adc-startup-time = <40>;
				atmel,adc-use-external-triggers;
				atmel,adc-vref = <3000>;
				atmel,adc-sample-hold-time = <11>;
				status = "disabled";
			};

			i2c2: i2c@f801c000 {
				compatible = "atmel,at91sam9x5-i2c";
				reg = <0xf801c000 0x4000>;
				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>;
				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
				       <&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
				dma-names = "tx", "rx";
				pinctrl-names = "default", "gpio";
				pinctrl-0 = <&pinctrl_i2c2>;
				pinctrl-1 = <&pinctrl_i2c2_gpio>;
				sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>;
				scl-gpios = <&pioA 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
				#address-cells = <1>;
				#size-cells = <0>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
				status = "disabled";
			};

			usart2: serial@f8020000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xf8020000 0x100>;
				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>,
				       <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
				dma-names = "tx", "rx";
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usart2>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
				clock-names = "usart";
				status = "disabled";
			};

			usart3: serial@f8024000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xf8024000 0x100>;
				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>,
				       <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
				dma-names = "tx", "rx";
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usart3>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
				clock-names = "usart";
				status = "disabled";
			};

			sha: crypto@f8034000 {
				compatible = "atmel,at91sam9g46-sha";
				reg = <0xf8034000 0x100>;
				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>;
				dma-names = "tx";
				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
				clock-names = "sha_clk";
			};

			aes: crypto@f8038000 {
				compatible = "atmel,at91sam9g46-aes";
				reg = <0xf8038000 0x100>;
				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>,
				       <&dma1 2 AT91_DMA_CFG_PER_ID(19)>;
				dma-names = "tx", "rx";
				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
				clock-names = "aes_clk";
			};

			tdes: crypto@f803c000 {
				compatible = "atmel,at91sam9g46-tdes";
				reg = <0xf803c000 0x100>;
				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>,
				       <&dma1 2 AT91_DMA_CFG_PER_ID(21)>;
				dma-names = "tx", "rx";
				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
				clock-names = "tdes_clk";
			};

			trng@f8040000 {
				compatible = "atmel,at91sam9g45-trng";
				reg = <0xf8040000 0x100>;
				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
			};

			hsmc: hsmc@ffffc000 {
				compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
				reg = <0xffffc000 0x1000>;
				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
				#address-cells = <1>;
				#size-cells = <1>;
				ranges;

				pmecc: ecc-engine@ffffc070 {
					compatible = "atmel,at91sam9g45-pmecc";
					reg = <0xffffc070 0x490>,
					      <0xffffc500 0x100>;
				};
			};

			dma0: dma-controller@ffffe600 {
				compatible = "atmel,at91sam9g45-dma";
				reg = <0xffffe600 0x200>;
				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
				#dma-cells = <2>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
				clock-names = "dma_clk";
			};

			dma1: dma-controller@ffffe800 {
				compatible = "atmel,at91sam9g45-dma";
				reg = <0xffffe800 0x200>;
				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
				#dma-cells = <2>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
				clock-names = "dma_clk";
			};

			ramc0: ramc@ffffea00 {
				compatible = "atmel,sama5d3-ddramc";
				reg = <0xffffea00 0x200>;
				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
				clock-names = "ddrck", "mpddr";
			};

			dbgu: serial@ffffee00 {
				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
				reg = <0xffffee00 0x200>;
				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
				       <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
				dma-names = "tx", "rx";
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_dbgu>;
				clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
				clock-names = "usart";
				status = "disabled";
			};

			aic: interrupt-controller@fffff000 {
				#interrupt-cells = <3>;
				compatible = "atmel,sama5d3-aic";
				interrupt-controller;
				reg = <0xfffff000 0x200>;
				atmel,external-irqs = <47>;
			};

			pinctrl: pinctrl@fffff200 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
				ranges = <0xfffff200 0xfffff200 0xa00>;
				atmel,mux-mask = <
					/*   A          B          C  */
					0xffffffff 0xc0fc0000 0xc0ff0000	/* pioA */
					0xffffffff 0x0ff8ffff 0x00000000	/* pioB */
					0xffffffff 0xbc00f1ff 0x7c00fc00	/* pioC */
					0xffffffff 0xc001c0e0 0x0001c1e0	/* pioD */
					0xffffffff 0xbf9f8000 0x18000000	/* pioE */
					>;

				/* shared pinctrl settings */
				adc0 {
					pinctrl_adc0_adtrg: adc0_adtrg {
						atmel,pins =
							<AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD19 periph A ADTRG */
					};
					pinctrl_adc0_ad0: adc0_ad0 {
						atmel,pins =
							<AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD20 periph A AD0 */
					};
					pinctrl_adc0_ad1: adc0_ad1 {
						atmel,pins =
							<AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD21 periph A AD1 */
					};
					pinctrl_adc0_ad2: adc0_ad2 {
						atmel,pins =
							<AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD22 periph A AD2 */
					};
					pinctrl_adc0_ad3: adc0_ad3 {
						atmel,pins =
							<AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD23 periph A AD3 */
					};
					pinctrl_adc0_ad4: adc0_ad4 {
						atmel,pins =
							<AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD24 periph A AD4 */
					};
					pinctrl_adc0_ad5: adc0_ad5 {
						atmel,pins =
							<AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD25 periph A AD5 */
					};
					pinctrl_adc0_ad6: adc0_ad6 {
						atmel,pins =
							<AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD26 periph A AD6 */
					};
					pinctrl_adc0_ad7: adc0_ad7 {
						atmel,pins =
							<AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD27 periph A AD7 */
					};
					pinctrl_adc0_ad8: adc0_ad8 {
						atmel,pins =
							<AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD28 periph A AD8 */
					};
					pinctrl_adc0_ad9: adc0_ad9 {
						atmel,pins =
							<AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD29 periph A AD9 */
					};
					pinctrl_adc0_ad10: adc0_ad10 {
						atmel,pins =
							<AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD30 periph A AD10, conflicts with PCK0 */
					};
					pinctrl_adc0_ad11: adc0_ad11 {
						atmel,pins =
							<AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD31 periph A AD11, conflicts with PCK1 */
					};
				};

				dbgu {
					pinctrl_dbgu: dbgu-0 {
						atmel,pins =
							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
							 AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
					};
				};

				ebi {
					pinctrl_ebi_addr: ebi-addr-0 {
						atmel,pins =
							<AT91_PIOE 1 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
					};

					pinctrl_ebi_nand_addr: ebi-addr-1 {
						atmel,pins =
							<AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
					};

					pinctrl_ebi_cs0: ebi-cs0-0 {
						atmel,pins =
							<AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
					};

					pinctrl_ebi_cs1: ebi-cs1-0 {
						atmel,pins =
							<AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
					};

					pinctrl_ebi_cs2: ebi-cs2-0 {
						atmel,pins =
							<AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
					};

					pinctrl_ebi_nwait: ebi-nwait-0 {
						atmel,pins =
							<AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
					};

					pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 {
						atmel,pins =
							<AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
					};
				};

				i2c0 {
					pinctrl_i2c0: i2c0-0 {
						atmel,pins =
							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
					};

					pinctrl_i2c0_gpio: i2c0-gpio {
						atmel,pins =
							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
					};
				};

				i2c1 {
					pinctrl_i2c1: i2c1-0 {
						atmel,pins =
							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
					};

					pinctrl_i2c1_gpio: i2c1-gpio {
						atmel,pins =
							<AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
							 AT91_PIOC 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
					};
				};

				i2c2 {
					pinctrl_i2c2: i2c2-0 {
						atmel,pins =
							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */
							 AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */
					};

					pinctrl_i2c2_gpio: i2c2-gpio {
						atmel,pins =
							<AT91_PIOA 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
							 AT91_PIOA 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
					};
				};

				isi {
					pinctrl_isi_data_0_7: isi-0-data-0-7 {
						atmel,pins =
							<AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
							 AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
							 AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
							 AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
							 AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
							 AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
							 AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
							 AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
							 AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC30 periph C ISI_PCK, conflicts with UTXD0 */
							 AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
							 AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
					};

					pinctrl_isi_data_8_9: isi-0-data-8-9 {
						atmel,pins =
							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
							 AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
					};

					pinctrl_isi_data_10_11: isi-0-data-10-11 {
						atmel,pins =
							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */
							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */
					};
				};

				mmc0 {
					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
						atmel,pins =
							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD9 periph A MCI0_CK */
							 AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD0 periph A MCI0_CDA with pullup */
							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD1 periph A MCI0_DA0 with pullup */
					};
					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
						atmel,pins =
							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD2 periph A MCI0_DA1 with pullup */
							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD3 periph A MCI0_DA2 with pullup */
							 AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD4 periph A MCI0_DA3 with pullup */
					};
					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
						atmel,pins =
							<AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
							 AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD7 periph A MCI0_DA6 with pullup, conflicts with TCLK0, PWMH3 */
							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
					};
				};

				mmc1 {
					pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
						atmel,pins =
							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB24 periph A MCI1_CK, conflicts with GRX5 */
							 AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
					};
					pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
						atmel,pins =
							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
							 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
							 AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
					};
				};

				nand0 {
					pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
						atmel,pins =
							<AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PE21 periph A with pullup */
							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PE22 periph A with pullup */
					};
				};

				pwm0 {
					pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 {
						atmel,pins =
							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D4 and LCDDAT20 */
					};
					pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 {
						atmel,pins =
							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX0 */
					};
					pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 {
						atmel,pins =
							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D5 and LCDDAT21 */
					};
					pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 {
						atmel,pins =
							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX1 */
					};

					pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 {
						atmel,pins =
							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D6 and LCDDAT22 */
					};
					pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 {
						atmel,pins =
							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX0 */
					};
					pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 {
						atmel,pins =
							<AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with G125CKO and RTS1 */
					};
					pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 {
						atmel,pins =
							<AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D7 and LCDDAT23 */
					};
					pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 {
						atmel,pins =
							<AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX1 */
					};
					pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 {
						atmel,pins =
							<AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with IRQ */
					};

					pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 {
						atmel,pins =
							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXCK */
					};
					pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 {
						atmel,pins =
							<AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA4 and TIOA0 */
					};
					pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 {
						atmel,pins =
							<AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXEN */
					};
					pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 {
						atmel,pins =
							<AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA5 and TIOB0 */
					};

					pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 {
						atmel,pins =
							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXDV */
					};
					pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 {
						atmel,pins =
							<AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA6 and TCLK0 */
					};
					pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 {
						atmel,pins =
							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXER */
					};
					pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 {
						atmel,pins =
							<AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA7 */
					};
				};

				spi0 {
					pinctrl_spi0: spi0-0 {
						atmel,pins =
							<AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A SPI0_MISO pin */
							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A SPI0_MOSI pin */
							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD12 periph A SPI0_SPCK pin */
					};
				};

				spi1 {
					pinctrl_spi1: spi1-0 {
						atmel,pins =
							<AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC22 periph A SPI1_MISO pin */
							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC23 periph A SPI1_MOSI pin */
							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC24 periph A SPI1_SPCK pin */
					};
				};

				ssc0 {
					pinctrl_ssc0_tx: ssc0_tx {
						atmel,pins =
							<AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC16 periph A TK0 */
							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC17 periph A TF0 */
							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC18 periph A TD0 */
					};

					pinctrl_ssc0_rx: ssc0_rx {
						atmel,pins =
							<AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC19 periph A RK0 */
							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC20 periph A RF0 */
							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC21 periph A RD0 */
					};
				};

				ssc1 {
					pinctrl_ssc1_tx: ssc1_tx {
						atmel,pins =
							<AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB2 periph B TK1, conflicts with GTX2 */
							 AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB3 periph B TF1, conflicts with GTX3 */
							 AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB6 periph B TD1, conflicts with TD1 */
					};

					pinctrl_ssc1_rx: ssc1_rx {
						atmel,pins =
							<AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB7 periph B RK1, conflicts with EREFCK */
							 AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB10 periph B RF1, conflicts with GTXER */
							 AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB11 periph B RD1, conflicts with GRXCK */
					};
				};

				uart0 {
					pinctrl_uart0: uart0-0 {
						atmel,pins =
							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* conflicts with PWMFI2, ISI_D8 */
							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* conflicts with ISI_PCK */
					};
				};

				uart1 {
					pinctrl_uart1: uart1-0 {
						atmel,pins =
							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with TWD0, ISI_VSYNC */
							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with TWCK0, ISI_HSYNC */
					};
				};

				usart0 {
					pinctrl_usart0: usart0-0 {
						atmel,pins =
							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
					};

					pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
						atmel,pins =
							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
					};
				};

				usart1 {
					pinctrl_usart1: usart1-0 {
						atmel,pins =
							<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
							 AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
					};

					pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
						atmel,pins =
							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB26 periph A, conflicts with GRX7 */
							 AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB27 periph A, conflicts with G125CKO */
					};
				};

				usart2 {
					pinctrl_usart2: usart2-0 {
						atmel,pins =
							<AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with A25 */
							 AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts NCS0 */
					};

					pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
						atmel,pins =
							<AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE23 periph B, conflicts with A23 */
							 AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE24 periph B, conflicts with A24 */
					};
				};

				usart3 {
					pinctrl_usart3: usart3-0 {
						atmel,pins =
							<AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with A18 */
							 AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with A19 */
					};

					pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
						atmel,pins =
							<AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE16 periph B, conflicts with A16 */
							 AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE17 periph B, conflicts with A17 */
					};
				};


				pioA: gpio@fffff200 {
					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
					reg = <0xfffff200 0x100>;
					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
				};

				pioB: gpio@fffff400 {
					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
					reg = <0xfffff400 0x100>;
					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
				};

				pioC: gpio@fffff600 {
					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
					reg = <0xfffff600 0x100>;
					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
				};

				pioD: gpio@fffff800 {
					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
					reg = <0xfffff800 0x100>;
					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
				};

				pioE: gpio@fffffa00 {
					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
					reg = <0xfffffa00 0x100>;
					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
				};
			};

			pmc: clock-controller@fffffc00 {
				compatible = "atmel,sama5d3-pmc", "syscon";
				reg = <0xfffffc00 0x120>;
				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
				#clock-cells = <2>;
				clocks = <&clk32k>, <&main_xtal>;
				clock-names = "slow_clk", "main_xtal";
			};

			reset_controller: reset-controller@fffffe00 {
				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
				reg = <0xfffffe00 0x10>;
				clocks = <&clk32k>;
			};

			shutdown_controller: poweroff@fffffe10 {
				compatible = "atmel,at91sam9x5-shdwc";
				reg = <0xfffffe10 0x10>;
				clocks = <&clk32k>;
			};

			pit: timer@fffffe30 {
				compatible = "atmel,at91sam9260-pit";
				reg = <0xfffffe30 0xf>;
				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
			};

			watchdog: watchdog@fffffe40 {
				compatible = "atmel,at91sam9260-wdt";
				reg = <0xfffffe40 0x10>;
				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
				clocks = <&clk32k>;
				atmel,watchdog-type = "hardware";
				atmel,reset-type = "all";
				atmel,dbg-halt;
				status = "disabled";
			};

			clk32k: clock-controller@fffffe50 {
				compatible = "atmel,sama5d3-sckc";
				reg = <0xfffffe50 0x4>;
				clocks = <&slow_xtal>;
				#clock-cells = <0>;
			};

			rtc@fffffeb0 {
				compatible = "atmel,at91rm9200-rtc";
				reg = <0xfffffeb0 0x30>;
				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
				clocks = <&clk32k>;
			};
		};

		nfc_sram: sram@200000 {
			compatible = "mmio-sram";
			no-memory-wc;
			reg = <0x200000 0x2400>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0x200000 0x2400>;
		};

		usb0: gadget@500000 {
			compatible = "atmel,sama5d3-udc";
			reg = <0x00500000 0x100000
			       0xf8030000 0x4000>;
			interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 33>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
			clock-names = "pclk", "hclk";
			status = "disabled";
		};

		usb1: ohci@600000 {
			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
			reg = <0x00600000 0x100000>;
			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_SYSTEM 6>;
			clock-names = "ohci_clk", "hclk", "uhpck";
			status = "disabled";
		};

		usb2: ehci@700000 {
			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
			reg = <0x00700000 0x100000>;
			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 32>;
			clock-names = "usb_clk", "ehci_clk";
			status = "disabled";
		};

		ebi: ebi@10000000 {
			compatible = "atmel,sama5d3-ebi";
			#address-cells = <2>;
			#size-cells = <1>;
			atmel,smc = <&hsmc>;
			reg = <0x10000000 0x10000000
			       0x40000000 0x30000000>;
			ranges = <0x0 0x0 0x10000000 0x10000000
				  0x1 0x0 0x40000000 0x10000000
				  0x2 0x0 0x50000000 0x10000000
				  0x3 0x0 0x60000000 0x10000000>;
			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
			status = "disabled";

			nand_controller: nand-controller {
				compatible = "atmel,sama5d3-nand-controller";
				atmel,nfc-sram = <&nfc_sram>;
				atmel,nfc-io = <&nfc_io>;
				ecc-engine = <&pmecc>;
				#address-cells = <2>;
				#size-cells = <1>;
				ranges;
				status = "disabled";
			};
		};

		nfc_io: nfc-io@70000000 {
			compatible = "atmel,sama5d3-nfc-io", "syscon";
			reg = <0x70000000 0x8000000>;
		};
	};
};