// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2023, Luca Weiss <[email protected]>
*/
/dts-v1/;
#include "qcom-msm8226.dtsi"
#include "pm8226.dtsi"
/delete-node/ &adsp_region;
/delete-node/ &smem_region;
/ {
model = "HTC One Mini 2";
compatible = "htc,memul", "qcom,msm8926", "qcom,msm8226";
chassis-type = "handset";
aliases {
mmc1 = &sdhc_2; /* SDC2 SD card slot */
};
gpio-keys {
compatible = "gpio-keys";
key-power {
label = "Power";
gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
debounce-interval = <15>;
};
key-volume-down {
label = "Volume Down";
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <15>;
};
key-volume-up {
label = "Volume Up";
gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <15>;
};
};
reserved-memory {
unknown@5b00000 {
reg = <0x05b00000 0x200000>;
no-map;
};
unknown@7500000 {
reg = <0x07500000 0xb00000>;
no-map;
};
mpss_region: mpss@8000000 {
reg = <0x08000000 0x4f00000>;
no-map;
};
unknown@cf00000 {
reg = <0x0cf00000 0x200000>;
no-map;
};
mba_region: mba@d100000 {
reg = <0x0d100000 0x3a000>;
no-map;
};
unknown@d13a000 {
reg = <0x0d13a000 0xc6000>;
no-map;
};
wcnss_region: wcnss@d200000 {
reg = <0x0d200000 0x650000>;
no-map;
};
unknown@d850000 {
reg = <0x0d850000 0x3b0000>;
no-map;
};
adsp_region: adsp@dc00000 {
reg = <0x0dc00000 0x1400000>;
no-map;
};
unknown@f000000 {
reg = <0x0f000000 0x500000>;
no-map;
};
venus_region: venus@f500000 {
reg = <0x0f500000 0x500000>;
no-map;
};
smem_region: smem@fa00000 {
reg = <0x0fa00000 0x100000>;
no-map;
};
unknown@fb00000 {
reg = <0x0fb00000 0x280000>;
no-map;
};
rmtfs@fd80000 {
compatible = "qcom,rmtfs-mem";
reg = <0x0fd80000 0x180000>;
no-map;
qcom,client-id = <1>;
};
unknown@ff00000 {
reg = <0x0ff00000 0x1700000>;
no-map;
};
};
};
&adsp {
firmware-name = "qcom/msm8926/memul/adsp.mbn";
status = "okay";
};
&blsp1_i2c2 {
status = "okay";
magnetometer@d {
compatible = "asahi-kasei,ak8963";
reg = <0x0d>;
interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_RISING>;
vdd-supply = <&pm8226_l19>;
vid-supply = <&pm8226_l28>;
};
accelerometer@18 {
compatible = "bosch,bma250e";
reg = <0x18>;
interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>;
vdd-supply = <&pm8226_l19>;
vddio-supply = <&pm8226_l28>;
};
};
&blsp1_i2c4 {
status = "okay";
/* TFA9887 @ 34 */
/* TFA9887 @ 35 */
};
&blsp1_i2c5 {
status = "okay";
touchscreen@20 {
compatible = "syna,rmi4-i2c";
reg = <0x20>;
interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&pm8226_l19>;
syna,startup-delay-ms = <160>;
#address-cells = <1>;
#size-cells = <0>;
rmi4-f01@1 {
reg = <0x1>;
syna,nosleep-mode = <1>;
};
rmi4-f12@12 {
reg = <0x12>;
syna,sensor-type = <1>;
};
};
};
&blsp1_i2c6 {
status = "okay";
/* NCP6924 Camera Regulators @ 10 */
/* PN544 NFC @ 28 */
/* TPS61310 Flash/Torch @ 33 */
};
&pm8226_vib {
status = "okay";
};
&rpm_requests {
regulators {
compatible = "qcom,rpm-pm8226-regulators";
pm8226_s3: s3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1350000>;
};
pm8226_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2200000>;
};
pm8226_s5: s5 {
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
};
pm8226_l1: l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
pm8226_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8226_l3: l3 {
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1337500>;
};
pm8226_l4: l4 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8226_l5: l5 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8226_l6: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l7: l7 {
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <1850000>;
};
pm8226_l8: l8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l9: l9 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
pm8226_l10: l10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l12: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l14: l14 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <2750000>;
};
pm8226_l15: l15 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
pm8226_l16: l16 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3350000>;
};
pm8226_l17: l17 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
pm8226_l18: l18 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
pm8226_l19: l19 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
pm8226_l20: l20 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
pm8226_l21: l21 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
};
pm8226_l22: l22 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pm8226_l23: l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
};
pm8226_l24: l24 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1350000>;
};
pm8226_l25: l25 {
regulator-min-microvolt = <1775000>;
regulator-max-microvolt = <2125000>;
};
pm8226_l26: l26 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
pm8226_l27: l27 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
pm8226_l28: l28 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_lvs1: lvs1 {};
};
};
&sdhc_2 {
vmmc-supply = <&pm8226_l18>;
vqmmc-supply = <&pm8226_l21>;
bus-width = <4>;
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
status = "okay";
};
&smbb {
qcom,fast-charge-safe-current = <1750000>;
qcom,fast-charge-current-limit = <1750000>;
qcom,fast-charge-safe-voltage = <4360000>;
qcom,fast-charge-high-threshold-voltage = <4350000>;
qcom,auto-recharge-threshold-voltage = <4300000>;
qcom,minimum-input-voltage = <4300000>;
status = "okay";
};
&usb {
extcon = <&smbb>;
dr_mode = "peripheral";
status = "okay";
};
&usb_hs_phy {
extcon = <&smbb>;
v1p8-supply = <&pm8226_l10>;
v3p3-supply = <&pm8226_l20>;
};
Codebase Browser
linux