// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/input/input.h>
#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include "qcom-msm8960.dtsi"
#include "pm8921.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/input/gpio-keys.h>
/ {
model = "Samsung Galaxy Express SGH-I437";
compatible = "samsung,expressatt", "qcom,msm8960";
chassis-type = "handset";
aliases {
serial0 = &gsbi5_serial;
mmc0 = &sdcc1; /* SDCC1 eMMC slot */
mmc1 = &sdcc3; /* SDCC3 SD card slot */
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
key-home {
label = "Home";
gpios = <&msmgpio 40 GPIO_ACTIVE_LOW>;
debounce-interval = <5>;
linux,code = <KEY_HOMEPAGE>;
wakeup-event-action = <EV_ACT_ASSERTED>;
wakeup-source;
};
key-volume-up {
label = "Volume Up";
gpios = <&msmgpio 50 GPIO_ACTIVE_LOW>;
debounce-interval = <5>;
linux,code = <KEY_VOLUMEUP>;
};
key-volume-down {
label = "Volume Down";
gpios = <&msmgpio 81 GPIO_ACTIVE_LOW>;
debounce-interval = <5>;
linux,code = <KEY_VOLUMEDOWN>;
};
};
};
&gsbi5 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
};
&gsbi5_serial {
status = "okay";
};
&sdcc1 {
vmmc-supply = <&pm8921_l5>;
status = "okay";
};
&sdcc3 {
vmmc-supply = <&pm8921_l6>;
vqmmc-supply = <&pm8921_l7>;
status = "okay";
};
&gsbi1 {
qcom,mode = <GSBI_PROT_SPI>;
pinctrl-0 = <&spi1_default>;
pinctrl-names = "default";
status = "okay";
};
&gsbi1_spi {
status = "okay";
};
&gsbi3 {
qcom,mode = <GSBI_PROT_I2C>;
status = "okay";
};
&gsbi3_i2c {
status = "okay";
// Atmel mXT224S touchscreen
touchscreen@4a {
compatible = "atmel,maxtouch";
reg = <0x4a>;
interrupt-parent = <&msmgpio>;
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
vdda-supply = <&pm8921_lvs6>;
vdd-supply = <&pm8921_l17>;
pinctrl-names = "default";
pinctrl-0 = <&touchscreen>;
};
};
&msmgpio {
spi1_default: spi1-default-state {
mosi-pins {
pins = "gpio6";
function = "gsbi1";
drive-strength = <12>;
bias-disable;
};
miso-pins {
pins = "gpio7";
function = "gsbi1";
drive-strength = <12>;
bias-disable;
};
cs-pins {
pins = "gpio8";
function = "gsbi1";
drive-strength = <12>;
bias-disable;
output-low;
};
clk-pins {
pins = "gpio9";
function = "gsbi1";
drive-strength = <12>;
bias-disable;
};
};
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio40", "gpio50", "gpio81";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
touchscreen: touchscreen-int-state {
pins = "gpio11";
function = "gpio";
output-enable;
bias-disable;
drive-strength = <2>;
};
};
&pm8921 {
interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
};
&rpm {
regulators {
compatible = "qcom,rpm-pm8921-regulators";
vin_lvs1_3_6-supply = <&pm8921_s4>;
vin_lvs2-supply = <&pm8921_s4>;
vin_lvs4_5_7-supply = <&pm8921_s4>;
vdd_ncp-supply = <&pm8921_l6>;
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
vdd_l21_l23_l29-supply = <&pm8921_s8>;
vdd_l24-supply = <&pm8921_s1>;
vdd_l25-supply = <&pm8921_s1>;
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
/* Buck SMPS */
pm8921_s1: s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
qcom,switch-mode-frequency = <3200000>;
bias-pull-down;
};
pm8921_s2: s2 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
pm8921_s3: s3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1150000>;
qcom,switch-mode-frequency = <4800000>;
bias-pull-down;
};
pm8921_s4: s4 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
};
pm8921_s7: s7 {
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
qcom,switch-mode-frequency = <3200000>;
bias-pull-down;
};
pm8921_s8: s8 {
regulator-always-on;
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
/* PMOS LDO */
pm8921_l1: l1 {
regulator-always-on;
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
bias-pull-down;
};
pm8921_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
pm8921_l3: l3 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
pm8921_l4: l4 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
pm8921_l5: l5 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
pm8921_l6: l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
pm8921_l7: l7 {
regulator-always-on;
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
pm8921_l8: l8 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3100000>;
bias-pull-down;
};
pm8921_l9: l9 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
bias-pull-down;
};
pm8921_l10: l10 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
pm8921_l11: l11 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
pm8921_l12: l12 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
pm8921_l14: l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
pm8921_l15: l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
pm8921_l16: l16 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
pm8921_l17: l17 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
pm8921_l18: l18 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1500000>;
bias-pull-down;
};
pm8921_l21: l21 {
regulator-min-microvolt = <1900000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
pm8921_l22: l22 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <2750000>;
bias-pull-down;
};
pm8921_l23: l23 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
pm8921_l24: l24 {
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1150000>;
bias-pull-down;
};
pm8921_l25: l25 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
bias-pull-down;
};
/* Low Voltage Switch */
pm8921_lvs1: lvs1 {
bias-pull-down;
};
pm8921_lvs2: lvs2 {
bias-pull-down;
};
pm8921_lvs3: lvs3 {
bias-pull-down;
};
pm8921_lvs4: lvs4 {
bias-pull-down;
};
pm8921_lvs5: lvs5 {
bias-pull-down;
};
pm8921_lvs6: lvs6 {
bias-pull-down;
};
pm8921_lvs7: lvs7 {
bias-pull-down;
};
pm8921_ncp: ncp {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
};
};
};
&usb_hs1_phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l4>;
};
&usb1 {
dr_mode = "otg";
status = "okay";
};
Codebase Browser
linux