// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
*
* EVM Board Schematics: https://www.ti.com/lit/zip/sprr458
*/
/dts-v1/;
#include <dt-bindings/net/ti-dp83867.h>
#include <dt-bindings/gpio/gpio.h>
#include "k3-j784s4.dtsi"
/ {
compatible = "ti,j784s4-evm", "ti,j784s4";
model = "Texas Instruments J784S4 EVM";
chosen {
stdout-path = "serial2:115200n8";
};
aliases {
serial0 = &wkup_uart0;
serial1 = &mcu_uart0;
serial2 = &main_uart8;
mmc0 = &main_sdhci0;
mmc1 = &main_sdhci1;
i2c0 = &wkup_i2c0;
i2c3 = &main_i2c0;
ethernet0 = &mcu_cpsw_port1;
ethernet1 = &main_cpsw1_port1;
};
memory@80000000 {
device_type = "memory";
bootph-all;
/* 32G RAM */
reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
<0x00000008 0x80000000 0x00000007 0x80000000>;
};
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
secure_ddr: optee@9e800000 {
reg = <0x00 0x9e800000 0x00 0x01800000>;
no-map;
};
mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa1000000 0x00 0x100000>;
no-map;
};
mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa1100000 0x00 0xf00000>;
no-map;
};
main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa2000000 0x00 0x100000>;
no-map;
};
main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa2100000 0x00 0xf00000>;
no-map;
};
main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa3000000 0x00 0x100000>;
no-map;
};
main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa3100000 0x00 0xf00000>;
no-map;
};
main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa4000000 0x00 0x100000>;
no-map;
};
main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa4100000 0x00 0xf00000>;
no-map;
};
main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa5000000 0x00 0x100000>;
no-map;
};
main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa5100000 0x00 0xf00000>;
no-map;
};
main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa6000000 0x00 0x100000>;
no-map;
};
main_r5fss2_core0_memory_region: r5f-memory@a6100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa6100000 0x00 0xf00000>;
no-map;
};
main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa7000000 0x00 0x100000>;
no-map;
};
main_r5fss2_core1_memory_region: r5f-memory@a7100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa7100000 0x00 0xf00000>;
no-map;
};
c71_0_dma_memory_region: c71-dma-memory@a8000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa8000000 0x00 0x100000>;
no-map;
};
c71_0_memory_region: c71-memory@a8100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa8100000 0x00 0xf00000>;
no-map;
};
c71_1_dma_memory_region: c71-dma-memory@a9000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa9000000 0x00 0x100000>;
no-map;
};
c71_1_memory_region: c71-memory@a9100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa9100000 0x00 0xf00000>;
no-map;
};
c71_2_dma_memory_region: c71-dma-memory@aa000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xaa000000 0x00 0x100000>;
no-map;
};
c71_2_memory_region: c71-memory@aa100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xaa100000 0x00 0xf00000>;
no-map;
};
c71_3_dma_memory_region: c71-dma-memory@ab000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xab000000 0x00 0x100000>;
no-map;
};
c71_3_memory_region: c71-memory@ab100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xab100000 0x00 0xf00000>;
no-map;
};
};
evm_12v0: regulator-evm12v0 {
/* main supply */
compatible = "regulator-fixed";
regulator-name = "evm_12v0";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-always-on;
regulator-boot-on;
};
vsys_3v3: regulator-vsys3v3 {
/* Output of LM5140 */
compatible = "regulator-fixed";
regulator-name = "vsys_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&evm_12v0>;
regulator-always-on;
regulator-boot-on;
};
vsys_5v0: regulator-vsys5v0 {
/* Output of LM5140 */
compatible = "regulator-fixed";
regulator-name = "vsys_5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&evm_12v0>;
regulator-always-on;
regulator-boot-on;
};
vdd_mmc1: regulator-sd {
/* Output of TPS22918 */
compatible = "regulator-fixed";
regulator-name = "vdd_mmc1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
enable-active-high;
vin-supply = <&vsys_3v3>;
gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
};
vdd_sd_dv: regulator-TLV71033 {
/* Output of TLV71033 */
compatible = "regulator-gpio";
regulator-name = "tlv71033";
pinctrl-names = "default";
pinctrl-0 = <&vdd_sd_dv_pins_default>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
vin-supply = <&vsys_5v0>;
gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>;
states = <1800000 0x0>,
<3300000 0x1>;
};
dp0_pwr_3v3: regulator-dp0-prw {
compatible = "regulator-fixed";
regulator-name = "dp0-pwr";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&exp4 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
dp0: connector-dp0 {
compatible = "dp-connector";
label = "DP0";
type = "full-size";
dp-pwr-supply = <&dp0_pwr_3v3>;
port {
dp0_connector_in: endpoint {
remote-endpoint = <&dp0_out>;
};
};
};
transceiver0: can-phy0 {
compatible = "ti,tcan1042";
#phy-cells = <0>;
max-bitrate = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
standby-gpios = <&wkup_gpio0 69 GPIO_ACTIVE_HIGH>;
};
transceiver1: can-phy1 {
compatible = "ti,tcan1042";
#phy-cells = <0>;
max-bitrate = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&mcu_mcan1_gpio_pins_default>;
standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>;
};
transceiver2: can-phy2 {
/* standby pin has been grounded by default */
compatible = "ti,tcan1042";
#phy-cells = <0>;
max-bitrate = <5000000>;
};
transceiver3: can-phy3 {
compatible = "ti,tcan1042";
#phy-cells = <0>;
max-bitrate = <5000000>;
standby-gpios = <&exp2 7 GPIO_ACTIVE_HIGH>;
mux-states = <&mux1 1>;
};
mux1: mux-controller {
compatible = "gpio-mux";
#mux-state-cells = <1>;
mux-gpios = <&exp2 14 GPIO_ACTIVE_HIGH>;
idle-state = <1>;
};
codec_audio: sound {
compatible = "ti,j7200-cpb-audio";
model = "j784s4-cpb";
ti,cpb-mcasp = <&mcasp0>;
ti,cpb-codec = <&pcm3168a_1>;
clocks = <&k3_clks 265 0>, <&k3_clks 265 1>,
<&k3_clks 157 34>, <&k3_clks 157 63>;
clock-names = "cpb-mcasp-auxclk", "cpb-mcasp-auxclk-48000",
"cpb-codec-scki", "cpb-codec-scki-48000";
};
};
&wkup_gpio0 {
status = "okay";
};
&main_pmx0 {
bootph-all;
main_cpsw2g_default_pins: main-cpsw2g-default-pins {
pinctrl-single,pins = <
J784S4_IOPAD(0x0b8, PIN_INPUT, 6) /* (AC34) MCASP1_ACLKX.RGMII1_RD0 */
J784S4_IOPAD(0x0a0, PIN_INPUT, 6) /* (AD34) MCASP0_AXR12.RGMII1_RD1 */
J784S4_IOPAD(0x0a4, PIN_INPUT, 6) /* (AJ36) MCASP0_AXR13.RGMII1_RD2 */
J784S4_IOPAD(0x0a8, PIN_INPUT, 6) /* (AF34) MCASP0_AXR14.RGMII1_RD3 */
J784S4_IOPAD(0x0b0, PIN_INPUT, 6) /* (AL33) MCASP1_AXR3.RGMII1_RXC */
J784S4_IOPAD(0x0ac, PIN_INPUT, 6) /* (AE34) MCASP0_AXR15.RGMII1_RX_CTL */
J784S4_IOPAD(0x08c, PIN_INPUT, 6) /* (AE35) MCASP0_AXR7.RGMII1_TD0 */
J784S4_IOPAD(0x090, PIN_INPUT, 6) /* (AC35) MCASP0_AXR8.RGMII1_TD1 */
J784S4_IOPAD(0x094, PIN_INPUT, 6) /* (AG35) MCASP0_AXR9.RGMII1_TD2 */
J784S4_IOPAD(0x098, PIN_INPUT, 6) /* (AH36) MCASP0_AXR10.RGMII1_TD3 */
J784S4_IOPAD(0x0b4, PIN_INPUT, 6) /* (AL34) MCASP1_AXR4.RGMII1_TXC */
J784S4_IOPAD(0x09c, PIN_INPUT, 6) /* (AF35) MCASP0_AXR11.RGMII1_TX_CTL */
>;
};
main_cpsw2g_mdio_default_pins: main-cpsw2g-mdio-default-pins {
pinctrl-single,pins = <
J784S4_IOPAD(0x0c0, PIN_INPUT, 6) /* (AD38) MCASP1_AXR0.MDIO0_MDC */
J784S4_IOPAD(0x0bc, PIN_INPUT, 6) /* (AD33) MCASP1_AFSX.MDIO0_MDIO */
>;
};
main_uart8_pins_default: main-uart8-default-pins {
bootph-all;
pinctrl-single,pins = <
J784S4_IOPAD(0x040, PIN_INPUT, 14) /* (AF37) MCASP0_AXR0.UART8_CTSn */
J784S4_IOPAD(0x044, PIN_OUTPUT, 14) /* (AG37) MCASP0_AXR1.UART8_RTSn */
J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */
J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */
>;
};
main_i2c0_pins_default: main-i2c0-default-pins {
pinctrl-single,pins = <
J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */
J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */
>;
};
main_i2c5_pins_default: main-i2c5-default-pins {
pinctrl-single,pins = <
J784S4_IOPAD(0x01c, PIN_INPUT, 8) /* (AG34) MCAN15_TX.I2C5_SCL */
J784S4_IOPAD(0x018, PIN_INPUT, 8) /* (AK36) MCAN14_RX.I2C5_SDA */
>;
};
main_mmc1_pins_default: main-mmc1-default-pins {
bootph-all;
pinctrl-single,pins = <
J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */
J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */
J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */
J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */
J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */
J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */
J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */
J784S4_IOPAD(0x0e8, PIN_INPUT, 8) /* (AR38) TIMER_IO0.MMC1_SDCD */
>;
};
vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
pinctrl-single,pins = <
J784S4_IOPAD(0x020, PIN_INPUT, 7) /* (AJ35) MCAN15_RX.GPIO0_8 */
>;
};
dp0_pins_default: dp0-default-pins {
pinctrl-single,pins = <
J784S4_IOPAD(0x0cc, PIN_INPUT, 12) /* (AM37) SPI0_CS0.DP0_HPD */
>;
};
main_i2c4_pins_default: main-i2c4-default-pins {
pinctrl-single,pins = <
J784S4_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AG33) MCAN14_TX.I2C4_SCL */
J784S4_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AH33) MCAN13_RX.I2C4_SDA */
>;
};
main_mcan4_pins_default: main-mcan4-default-pins {
pinctrl-single,pins = <
J784S4_IOPAD(0x088, PIN_INPUT, 0) /* (AF36) MCAN4_RX */
J784S4_IOPAD(0x084, PIN_OUTPUT, 0) /* (AG38) MCAN4_TX */
>;
};
main_mcan16_pins_default: main-mcan16-default-pins {
pinctrl-single,pins = <
J784S4_IOPAD(0x028, PIN_INPUT, 0) /* (AE33) MCAN16_RX */
J784S4_IOPAD(0x024, PIN_OUTPUT, 0) /* (AH34) MCAN16_TX */
>;
};
main_usbss0_pins_default: main-usbss0-default-pins {
bootph-all;
pinctrl-single,pins = <
J784S4_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AN37) TIMER_IO1.USB0_DRVVBUS */
>;
};
main_i2c3_pins_default: main-i2c3-default-pins {
pinctrl-single,pins = <
J784S4_IOPAD(0x064, PIN_INPUT, 13) /* (AF38) MCAN0_TX.I2C3_SCL */
J784S4_IOPAD(0x060, PIN_INPUT, 13) /* (AE36) MCASP2_AXR1.I2C3_SDA */
>;
};
main_mcasp0_pins_default: main-mcasp0-default-pins {
pinctrl-single,pins = <
J784S4_IOPAD(0x038, PIN_OUTPUT_PULLDOWN, 1) /* (AK35) MCASP0_ACLKX */
J784S4_IOPAD(0x03c, PIN_OUTPUT_PULLDOWN, 1) /* (AK38) MCASP0_AFSX */
J784S4_IOPAD(0x07c, PIN_OUTPUT_PULLDOWN, 1) /* (AJ38) MCASP0_AXR3 */
J784S4_IOPAD(0x080, PIN_INPUT_PULLDOWN, 1) /* (AK34) MCASP0_AXR4 */
>;
};
audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins {
pinctrl-single,pins = <
J784S4_IOPAD(0x078, PIN_OUTPUT, 1) /* (AH37) MCAN2_RX.AUDIO_EXT_REFCLK1 */
>;
};
};
&wkup_pmx2 {
bootph-all;
wkup_uart0_pins_default: wkup-uart0-default-pins {
bootph-all;
pinctrl-single,pins = <
J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */
>;
};
wkup_i2c0_pins_default: wkup-i2c0-default-pins {
bootph-all;
pinctrl-single,pins = <
J784S4_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
J784S4_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
>;
};
mcu_uart0_pins_default: mcu-uart0-default-pins {
bootph-all;
pinctrl-single,pins = <
J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (H37) WKUP_GPIO0_14.MCU_UART0_CTSn */
J784S4_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (K37) WKUP_GPIO0_15.MCU_UART0_RTSn */
J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */
J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */
>;
};
mcu_cpsw_pins_default: mcu-cpsw-default-pins {
pinctrl-single,pins = <
J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */
J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */
J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */
J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */
J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */
J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */
J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */
J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */
J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */
J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */
J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */
J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
>;
};
mcu_mdio_pins_default: mcu-mdio-default-pins {
pinctrl-single,pins = <
J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */
J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
>;
};
mcu_adc0_pins_default: mcu-adc0-default-pins {
pinctrl-single,pins = <
J784S4_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (P36) MCU_ADC0_AIN0 */
J784S4_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (V36) MCU_ADC0_AIN1 */
J784S4_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (T34) MCU_ADC0_AIN2 */
J784S4_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (T36) MCU_ADC0_AIN3 */
J784S4_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (P34) MCU_ADC0_AIN4 */
J784S4_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (R37) MCU_ADC0_AIN5 */
J784S4_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (R33) MCU_ADC0_AIN6 */
J784S4_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (V38) MCU_ADC0_AIN7 */
>;
};
mcu_adc1_pins_default: mcu-adc1-default-pins {
pinctrl-single,pins = <
J784S4_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (Y38) MCU_ADC1_AIN0 */
J784S4_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (Y34) MCU_ADC1_AIN1 */
J784S4_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (V34) MCU_ADC1_AIN2 */
J784S4_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (W37) MCU_ADC1_AIN3 */
J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA37) MCU_ADC1_AIN4 */
J784S4_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (W33) MCU_ADC1_AIN5 */
J784S4_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (U33) MCU_ADC1_AIN6 */
J784S4_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */
>;
};
mcu_mcan0_pins_default: mcu-mcan0-default-pins {
pinctrl-single,pins = <
J784S4_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (K33) MCU_MCAN0_TX */
J784S4_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (F38) MCU_MCAN0_RX */
>;
};
mcu_mcan1_pins_default: mcu-mcan1-default-pins {
pinctrl-single,pins = <
J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (H35) WKUP_GPIO0_4.MCU_MCAN1_TX */
J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (K36) WKUP_GPIO0_5.MCU_MCAN1_RX */
>;
};
mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
pinctrl-single,pins = <
J784S4_WKUP_IOPAD(0x040, PIN_INPUT, 7) /* (J38) MCU_SPI0_D1.WKUP_GPIO0_69 */
>;
};
mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins {
pinctrl-single,pins = <
J784S4_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (J35) WKUP_GPIO0_2 */
>;
};
};
&wkup_pmx1 {
status = "okay";
pmic_irq_pins_default: pmic-irq-default-pins {
pinctrl-single,pins = <
/* (G33) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */
J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7)
>;
};
};
&wkup_pmx0 {
bootph-all;
mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
bootph-all;
pinctrl-single,pins = <
J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */
J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */
J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */
J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */
J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */
J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */
J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */
J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */
J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */
J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */
J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */
>;
};
};
&wkup_pmx1 {
bootph-all;
mcu_fss0_ospi0_1_pins_default: mcu-fss0-ospi0-1-default-pins {
bootph-all;
pinctrl-single,pins = <
J784S4_WKUP_IOPAD(0x004, PIN_OUTPUT, 6) /* (C32) MCU_OSPI0_ECC_FAIL */
J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 6) /* (B34) MCU_OSPI0_RESET_OUT0 */
>;
};
mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
bootph-all;
pinctrl-single,pins = <
J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (F32) MCU_OSPI1_CLK */
J784S4_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (G32) MCU_OSPI1_CSn0 */
J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (E35) MCU_OSPI1_D0 */
J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (D31) MCU_OSPI1_D1 */
J784S4_WKUP_IOPAD(0x01C, PIN_INPUT, 0) /* (G31) MCU_OSPI1_D2 */
J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (F33) MCU_OSPI1_D3 */
J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F31) MCU_OSPI1_DQS */
J784S4_WKUP_IOPAD(0x00C, PIN_INPUT, 0) /* (C31) MCU_OSPI1_LBCLKO */
>;
};
};
&wkup_uart0 {
/* Firmware usage */
status = "reserved";
pinctrl-names = "default";
pinctrl-0 = <&wkup_uart0_pins_default>;
};
&wkup_i2c0 {
bootph-all;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&wkup_i2c0_pins_default>;
clock-frequency = <400000>;
eeprom@50 {
/* CAV24C256WE-GT3 */
compatible = "atmel,24c256";
reg = <0x50>;
};
tps659413: pmic@48 {
compatible = "ti,tps6594-q1";
reg = <0x48>;
system-power-controller;
pinctrl-names = "default";
pinctrl-0 = <&pmic_irq_pins_default>;
interrupt-parent = <&wkup_gpio0>;
interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
gpio-controller;
#gpio-cells = <2>;
ti,primary-pmic;
buck12-supply = <&vsys_3v3>;
buck3-supply = <&vsys_3v3>;
buck4-supply = <&vsys_3v3>;
buck5-supply = <&vsys_3v3>;
ldo1-supply = <&vsys_3v3>;
ldo2-supply = <&vsys_3v3>;
ldo3-supply = <&vsys_3v3>;
ldo4-supply = <&vsys_3v3>;
regulators {
bucka12: buck12 {
regulator-name = "vdd_ddr_1v1";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-boot-on;
regulator-always-on;
};
bucka3: buck3 {
regulator-name = "vdd_ram_0v85";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-boot-on;
regulator-always-on;
};
bucka4: buck4 {
regulator-name = "vdd_io_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
bucka5: buck5 {
regulator-name = "vdd_mcu_0v85";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-boot-on;
regulator-always-on;
};
ldoa1: ldo1 {
regulator-name = "vdd_mcuio_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldoa2: ldo2 {
regulator-name = "vdd_mcuio_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldoa3: ldo3 {
regulator-name = "vds_dll_0v8";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-boot-on;
regulator-always-on;
};
ldoa4: ldo4 {
regulator-name = "vda_mcu_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
};
};
tps62873a: regulator@40 {
compatible = "ti,tps62873";
reg = <0x40>;
bootph-pre-ram;
regulator-name = "VDD_CPU_AVS";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1330000>;
regulator-boot-on;
regulator-always-on;
};
tps62873b: regulator@43 {
compatible = "ti,tps62873";
reg = <0x43>;
regulator-name = "VDD_CORE_0V8";
regulator-min-microvolt = <760000>;
regulator-max-microvolt = <840000>;
regulator-boot-on;
regulator-always-on;
};
};
&mcu_uart0 {
bootph-all;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_uart0_pins_default>;
};
&main_uart8 {
bootph-all;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart8_pins_default>;
};
&ufs_wrapper {
status = "okay";
};
&fss {
bootph-all;
status = "okay";
};
&ospi0 {
bootph-all;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>, <&mcu_fss0_ospi0_1_pins_default>;
flash@0 {
bootph-all;
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
spi-rx-bus-width = <8>;
spi-max-frequency = <25000000>;
cdns,tshsl-ns = <60>;
cdns,tsd2d-ns = <60>;
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <4>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ospi.tiboot3";
reg = <0x0 0x80000>;
};
partition@80000 {
label = "ospi.tispl";
reg = <0x80000 0x200000>;
};
partition@280000 {
label = "ospi.u-boot";
reg = <0x280000 0x400000>;
};
partition@680000 {
label = "ospi.env";
reg = <0x680000 0x40000>;
};
partition@6c0000 {
label = "ospi.env.backup";
reg = <0x6c0000 0x40000>;
};
partition@800000 {
label = "ospi.rootfs";
reg = <0x800000 0x37c0000>;
};
partition@3fc0000 {
bootph-all;
label = "ospi.phypattern";
reg = <0x3fc0000 0x40000>;
};
};
};
};
&ospi1 {
bootph-all;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
flash@0 {
bootph-all;
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <40000000>;
cdns,tshsl-ns = <60>;
cdns,tsd2d-ns = <60>;
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <2>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "qspi.tiboot3";
reg = <0x0 0x80000>;
};
partition@80000 {
label = "qspi.tispl";
reg = <0x80000 0x200000>;
};
partition@280000 {
label = "qspi.u-boot";
reg = <0x280000 0x400000>;
};
partition@680000 {
label = "qspi.env";
reg = <0x680000 0x40000>;
};
partition@6c0000 {
label = "qspi.env.backup";
reg = <0x6c0000 0x40000>;
};
partition@800000 {
label = "qspi.rootfs";
reg = <0x800000 0x37c0000>;
};
partition@3fc0000 {
bootph-all;
label = "qspi.phypattern";
reg = <0x3fc0000 0x40000>;
};
};
};
};
&main_i2c0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
clock-frequency = <400000>;
exp1: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "PCIE1_2L_MODE_SEL", "PCIE1_4L_PERSTZ", "PCIE1_2L_RC_RSTZ",
"PCIE1_2L_EP_RST_EN", "PCIE0_4L_MODE_SEL", "PCIE0_4L_PERSTZ",
"PCIE0_4L_RC_RSTZ", "PCIE0_4L_EP_RST_EN", "PCIE1_4L_PRSNT#",
"PCIE0_4L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3",
"AUDIO_MUX_SEL", "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTZ";
p12-hog {
/* P12 - AUDIO_MUX_SEL */
gpio-hog;
gpios = <12 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "AUDIO_MUX_SEL";
};
};
exp2: gpio@22 {
compatible = "ti,tca6424";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "R_GPIO_RGMII1_RST", "ENET2_I2CMUX_SEL", "GPIO_USD_PWR_EN",
"USBC_PWR_EN", "USBC_MODE_SEL1", "USBC_MODE_SEL0",
"GPIO_LIN_EN", "R_CAN_STB", "CTRL_PM_I2C_OE#",
"ENET2_EXP_PWRDN", "ENET2_EXP_SPARE2", "CDCI2_RSTZ",
"USB2.0_MUX_SEL", "CANUART_MUX_SEL0", "CANUART_MUX2_SEL1",
"CANUART_MUX1_SEL1", "ENET1_EXP_PWRDN", "ENET1_EXP_RESETZ",
"ENET1_I2CMUX_SEL", "ENET1_EXP_SPARE2", "ENET2_EXP_RESETZ",
"USER_INPUT1", "USER_LED1", "USER_LED2";
p13-hog {
/* P13 - CANUART_MUX_SEL0 */
gpio-hog;
gpios = <13 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "CANUART_MUX_SEL0";
};
p15-hog {
/* P15 - CANUART_MUX1_SEL1 */
gpio-hog;
gpios = <15 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "CANUART_MUX1_SEL1";
};
};
};
&main_i2c5 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c5_pins_default>;
clock-frequency = <400000>;
status = "okay";
exp5: gpio@20 {
compatible = "ti,tca6408";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "CSI2_EXP_RSTZ", "CSI2_EXP_A_GPIO0",
"CSI2_EXP_A_GPIO1", "CSI2_EXP_A_GPIO3",
"CSI2_EXP_B_GPIO1", "CSI2_EXP_B_GPIO2",
"CSI2_EXP_B_GPIO3", "CSI2_EXP_B_GPIO4";
};
};
&main_sdhci0 {
bootph-all;
/* eMMC */
status = "okay";
non-removable;
ti,driver-strength-ohm = <50>;
disable-wp;
};
&main_sdhci1 {
bootph-all;
/* SD card */
status = "okay";
pinctrl-0 = <&main_mmc1_pins_default>;
pinctrl-names = "default";
disable-wp;
vmmc-supply = <&vdd_mmc1>;
vqmmc-supply = <&vdd_sd_dv>;
};
&main_gpio0 {
status = "okay";
};
&mcu_cpsw {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_cpsw_pins_default>;
};
&davinci_mdio {
pinctrl-names = "default";
pinctrl-0 = <&mcu_mdio_pins_default>;
mcu_phy0: ethernet-phy@0 {
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,min-output-impedance;
};
};
&mcu_cpsw_port1 {
status = "okay";
phy-mode = "rgmii-rxid";
phy-handle = <&mcu_phy0>;
};
&main_cpsw1 {
pinctrl-names = "default";
pinctrl-0 = <&main_cpsw2g_default_pins>;
status = "okay";
};
&main_cpsw1_mdio {
pinctrl-names = "default";
pinctrl-0 = <&main_cpsw2g_mdio_default_pins>;
status = "okay";
main_cpsw1_phy0: ethernet-phy@0 {
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,min-output-impedance;
};
};
&main_cpsw1_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&main_cpsw1_phy0>;
status = "okay";
};
&mailbox0_cluster0 {
status = "okay";
interrupts = <436>;
mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
ti,mbox-rx = <2 0 0>;
ti,mbox-tx = <3 0 0>;
};
};
&mailbox0_cluster1 {
status = "okay";
interrupts = <432>;
mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
ti,mbox-rx = <2 0 0>;
ti,mbox-tx = <3 0 0>;
};
};
&mailbox0_cluster2 {
status = "okay";
interrupts = <428>;
mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
ti,mbox-rx = <2 0 0>;
ti,mbox-tx = <3 0 0>;
};
};
&mailbox0_cluster3 {
status = "okay";
interrupts = <424>;
mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
ti,mbox-rx = <2 0 0>;
ti,mbox-tx = <3 0 0>;
};
};
&mailbox0_cluster4 {
status = "okay";
interrupts = <420>;
mbox_c71_0: mbox-c71-0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
mbox_c71_1: mbox-c71-1 {
ti,mbox-rx = <2 0 0>;
ti,mbox-tx = <3 0 0>;
};
};
&mailbox0_cluster5 {
status = "okay";
interrupts = <416>;
mbox_c71_2: mbox-c71-2 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
mbox_c71_3: mbox-c71-3 {
ti,mbox-rx = <2 0 0>;
ti,mbox-tx = <3 0 0>;
};
};
&mcu_r5fss0_core0 {
status = "okay";
mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
<&mcu_r5fss0_core0_memory_region>;
};
&mcu_r5fss0_core1 {
status = "okay";
mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
<&mcu_r5fss0_core1_memory_region>;
};
&main_r5fss0_core0 {
status = "okay";
mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
memory-region = <&main_r5fss0_core0_dma_memory_region>,
<&main_r5fss0_core0_memory_region>;
};
&main_r5fss0_core1 {
status = "okay";
mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
memory-region = <&main_r5fss0_core1_dma_memory_region>,
<&main_r5fss0_core1_memory_region>;
};
&main_r5fss1_core0 {
status = "okay";
mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
memory-region = <&main_r5fss1_core0_dma_memory_region>,
<&main_r5fss1_core0_memory_region>;
};
&main_r5fss1_core1 {
status = "okay";
mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
memory-region = <&main_r5fss1_core1_dma_memory_region>,
<&main_r5fss1_core1_memory_region>;
};
&main_r5fss2_core0 {
status = "okay";
mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
memory-region = <&main_r5fss2_core0_dma_memory_region>,
<&main_r5fss2_core0_memory_region>;
};
&main_r5fss2_core1 {
status = "okay";
mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
memory-region = <&main_r5fss2_core1_dma_memory_region>,
<&main_r5fss2_core1_memory_region>;
};
&c71_0 {
status = "okay";
mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
memory-region = <&c71_0_dma_memory_region>,
<&c71_0_memory_region>;
};
&c71_1 {
status = "okay";
mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
memory-region = <&c71_1_dma_memory_region>,
<&c71_1_memory_region>;
};
&c71_2 {
status = "okay";
mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
memory-region = <&c71_2_dma_memory_region>,
<&c71_2_memory_region>;
};
&c71_3 {
status = "okay";
mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
memory-region = <&c71_3_dma_memory_region>,
<&c71_3_memory_region>;
};
&tscadc0 {
pinctrl-0 = <&mcu_adc0_pins_default>;
pinctrl-names = "default";
status = "okay";
adc {
ti,adc-channels = <0 1 2 3 4 5 6 7>;
};
};
&tscadc1 {
pinctrl-0 = <&mcu_adc1_pins_default>;
pinctrl-names = "default";
status = "okay";
adc {
ti,adc-channels = <0 1 2 3 4 5 6 7>;
};
};
&serdes_refclk {
status = "okay";
clock-frequency = <100000000>;
};
&dss {
status = "okay";
assigned-clocks = <&k3_clks 218 2>,
<&k3_clks 218 5>,
<&k3_clks 218 14>,
<&k3_clks 218 18>;
assigned-clock-parents = <&k3_clks 218 3>,
<&k3_clks 218 7>,
<&k3_clks 218 16>,
<&k3_clks 218 22>;
};
&serdes0 {
status = "okay";
serdes0_pcie1_link: phy@0 {
reg = <0>;
cdns,num-lanes = <2>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_PCIE>;
resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
};
serdes0_usb_link: phy@3 {
reg = <3>;
cdns,num-lanes = <1>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_USB3>;
resets = <&serdes_wiz0 4>;
};
};
&serdes_wiz0 {
status = "okay";
};
&usb_serdes_mux {
idle-states = <0>; /* USB0 to SERDES lane 3 */
};
&usbss0 {
status = "okay";
pinctrl-0 = <&main_usbss0_pins_default>;
pinctrl-names = "default";
ti,vbus-divider;
};
&usb0 {
dr_mode = "otg";
maximum-speed = "super-speed";
phys = <&serdes0_usb_link>;
phy-names = "cdns3,usb3-phy";
};
&serdes_wiz4 {
status = "okay";
};
&serdes4 {
status = "okay";
serdes4_dp_link: phy@0 {
reg = <0>;
cdns,num-lanes = <4>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_DP>;
resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>,
<&serdes_wiz4 3>, <&serdes_wiz4 4>;
};
};
&mhdp {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dp0_pins_default>;
phys = <&serdes4_dp_link>;
phy-names = "dpphy";
};
&dss_ports {
/* DP */
port {
dpi0_out: endpoint {
remote-endpoint = <&dp0_in>;
};
};
};
&main_i2c4 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c4_pins_default>;
clock-frequency = <400000>;
exp4: gpio@20 {
compatible = "ti,tca6408";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
};
&dp0_ports {
port@0 {
reg = <0>;
dp0_in: endpoint {
remote-endpoint = <&dpi0_out>;
};
};
port@4 {
reg = <4>;
dp0_out: endpoint {
remote-endpoint = <&dp0_connector_in>;
};
};
};
&mcu_mcan0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_mcan0_pins_default>;
phys = <&transceiver0>;
};
&mcu_mcan1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_mcan1_pins_default>;
phys = <&transceiver1>;
};
&main_mcan16 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_mcan16_pins_default>;
phys = <&transceiver2>;
};
&main_mcan4 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_mcan4_pins_default>;
phys = <&transceiver3>;
};
&pcie1_rc {
status = "okay";
num-lanes = <2>;
reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
phys = <&serdes0_pcie1_link>;
phy-names = "pcie-phy";
};
&serdes1 {
status = "okay";
serdes1_pcie0_link: phy@0 {
reg = <0>;
cdns,num-lanes = <2>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_PCIE>;
resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
};
};
&serdes_wiz1 {
status = "okay";
};
&pcie0_rc {
status = "okay";
reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
phys = <&serdes1_pcie0_link>;
phy-names = "pcie-phy";
};
&k3_clks {
/* Confiure AUDIO_EXT_REFCLK1 pin as output */
pinctrl-names = "default";
pinctrl-0 = <&audio_ext_refclk1_pins_default>;
};
&main_i2c3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c3_pins_default>;
clock-frequency = <400000>;
exp3: gpio@20 {
compatible = "ti,tca6408";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
pcm3168a_1: audio-codec@44 {
compatible = "ti,pcm3168a";
reg = <0x44>;
#sound-dai-cells = <1>;
reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>;
clocks = <&audio_refclk1>;
clock-names = "scki";
VDD1-supply = <&vsys_3v3>;
VDD2-supply = <&vsys_3v3>;
VCCAD1-supply = <&vsys_5v0>;
VCCAD2-supply = <&vsys_5v0>;
VCCDA1-supply = <&vsys_5v0>;
VCCDA2-supply = <&vsys_5v0>;
};
};
&mcasp0 {
status = "okay";
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&main_mcasp0_pins_default>;
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
auxclk-fs-ratio = <256>;
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 0 1
2 0 0 0
0 0 0 0
0 0 0 0
>;
};
Codebase Browser
linux