// SPDX-License-Identifier: GPL-2.0
#include "tegra234.dtsi"
/ {
compatible = "nvidia,p3767", "nvidia,tegra234";
aliases {
mmc0 = "/bus@0/mmc@3400000";
};
bus@0 {
aconnect@2900000 {
status = "okay";
ahub@2900800 {
status = "okay";
i2s@2901100 {
status = "okay";
};
i2s@2901300 {
status = "okay";
};
};
dma-controller@2930000 {
status = "okay";
};
interrupt-controller@2a40000 {
status = "okay";
};
};
i2c@3160000 {
status = "okay";
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
label = "module";
vcc-supply = <&vdd_1v8_hs>;
address-width = <8>;
pagesize = <8>;
size = <256>;
read-only;
};
};
spi@3270000 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <102000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
};
};
/*
* This only exists on Jetson Orin Nano Developer Kit (SKU 5)
* but UEFI needs this and will remove it on devices where it
* doesn't exist.
*/
mmc@3400000 {
status = "okay";
bus-width = <4>;
cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
disable-wp;
};
hda@3510000 {
status = "okay";
};
padctl@3520000 {
vclamp-usb-supply = <&vdd_1v8_ao>;
avdd-usb-supply = <&vdd_3v3_ao>;
};
i2c@c240000 {
status = "okay";
power-sensor@40 {
compatible = "ti,ina3221";
reg = <0x40>;
#address-cells = <1>;
#size-cells = <0>;
input@0 {
reg = <0x0>;
label = "VDD_IN";
shunt-resistor-micro-ohms = <5000>;
};
input@1 {
reg = <0x1>;
label = "VDD_CPU_GPU_CV";
shunt-resistor-micro-ohms = <5000>;
};
input@2 {
reg = <0x2>;
label = "VDD_SOC";
shunt-resistor-micro-ohms = <5000>;
};
};
};
rtc@c2a0000 {
status = "okay";
};
pmc@c360000 {
nvidia,invert-interrupt;
};
};
vdd_5v0_sys: regulator-vdd-5v0-sys {
compatible = "regulator-fixed";
regulator-name = "VDD_5V0_SYS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
vdd_1v8_hs: regulator-vdd-1v8-hs {
compatible = "regulator-fixed";
regulator-name = "VDD_1V8_HS";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vdd_1v8_ao: regulator-vdd-1v8-ao {
compatible = "regulator-fixed";
regulator-name = "VDD_1V8_AO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
vin-supply = <&vdd_5v0_sys>;
};
vdd_3v3_ao: regulator-vdd-3v3-ao {
compatible = "regulator-fixed";
regulator-name = "VDD_3V3_AO";
regulator-min-microvolt = <33000000>;
regulator-max-microvolt = <33000000>;
regulator-always-on;
vin-supply = <&vdd_5v0_sys>;
};
sound {
compatible = "nvidia,tegra186-audio-graph-card";
status = "okay";
dais = /* ADMAIF (FE) Ports */
<&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
<&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
<&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
<&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
<&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
/* XBAR Ports */
<&xbar_i2s2_port>, <&xbar_i2s4_port>,
<&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
<&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
<&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
<&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
<&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
<&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
<&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
<&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>,
<&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>,
<&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>,
<&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>,
<&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
<&xbar_adx3_in_port>, <&xbar_adx4_in_port>,
<&xbar_mix_in1_port>, <&xbar_mix_in2_port>,
<&xbar_mix_in3_port>, <&xbar_mix_in4_port>,
<&xbar_mix_in5_port>, <&xbar_mix_in6_port>,
<&xbar_mix_in7_port>, <&xbar_mix_in8_port>,
<&xbar_mix_in9_port>, <&xbar_mix_in10_port>,
<&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
<&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
<&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
<&xbar_asrc_in7_port>,
<&xbar_ope1_in_port>,
/* HW accelerators */
<&sfc1_out_port>, <&sfc2_out_port>,
<&sfc3_out_port>, <&sfc4_out_port>,
<&mvc1_out_port>, <&mvc2_out_port>,
<&amx1_out_port>, <&amx2_out_port>,
<&amx3_out_port>, <&amx4_out_port>,
<&adx1_out1_port>, <&adx1_out2_port>,
<&adx1_out3_port>, <&adx1_out4_port>,
<&adx2_out1_port>, <&adx2_out2_port>,
<&adx2_out3_port>, <&adx2_out4_port>,
<&adx3_out1_port>, <&adx3_out2_port>,
<&adx3_out3_port>, <&adx3_out4_port>,
<&adx4_out1_port>, <&adx4_out2_port>,
<&adx4_out3_port>, <&adx4_out4_port>,
<&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>,
<&mix_out4_port>, <&mix_out5_port>,
<&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
<&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
<&ope1_out_port>,
/* BE I/O Ports */
<&i2s2_port>, <&i2s4_port>;
};
thermal-zones {
tj-thermal {
polling-delay = <1000>;
polling-delay-passive = <1000>;
status = "okay";
trips {
tj_trip_active0: active-0 {
temperature = <35000>;
hysteresis = <4000>;
type = "active";
};
tj_trip_active1: active-1 {
temperature = <74000>;
hysteresis = <4000>;
type = "active";
};
tj_trip_active2: active-2 {
temperature = <95000>;
hysteresis = <4000>;
type = "active";
};
};
};
};
};
Codebase Browser
linux