// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2018-2019 NXP
* Dong Aisheng <[email protected]>
*/
#include <dt-bindings/clock/imx8-lpcg.h>
#include <dt-bindings/dma/fsl-edma.h>
#include <dt-bindings/firmware/imx/rsrc.h>
dma_ipg_clk: clock-dma-ipg {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <120000000>;
clock-output-names = "dma_ipg_clk";
};
dma_subsys: bus@5a000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x5a000000 0x0 0x5a000000 0x1000000>;
lpspi0: spi@5a000000 {
compatible = "fsl,imx7ulp-spi";
reg = <0x5a000000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&spi0_lpcg IMX_LPCG_CLK_0>,
<&spi0_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <60000000>;
power-domains = <&pd IMX_SC_R_SPI_0>;
status = "disabled";
};
lpspi1: spi@5a010000 {
compatible = "fsl,imx7ulp-spi";
reg = <0x5a010000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&spi1_lpcg IMX_LPCG_CLK_0>,
<&spi1_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <60000000>;
power-domains = <&pd IMX_SC_R_SPI_1>;
status = "disabled";
};
lpspi2: spi@5a020000 {
compatible = "fsl,imx7ulp-spi";
reg = <0x5a020000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&spi2_lpcg IMX_LPCG_CLK_0>,
<&spi2_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <60000000>;
power-domains = <&pd IMX_SC_R_SPI_2>;
status = "disabled";
};
lpspi3: spi@5a030000 {
compatible = "fsl,imx7ulp-spi";
reg = <0x5a030000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&spi3_lpcg IMX_LPCG_CLK_0>,
<&spi3_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <60000000>;
power-domains = <&pd IMX_SC_R_SPI_3>;
status = "disabled";
};
lpuart0: serial@5a060000 {
reg = <0x5a060000 0x1000>;
interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
<&uart0_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_0>;
dma-names = "rx", "tx";
dmas = <&edma2 8 0 FSL_EDMA_RX>, <&edma2 9 0 0>;
status = "disabled";
};
lpuart1: serial@5a070000 {
reg = <0x5a070000 0x1000>;
interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
<&uart1_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_1>;
dma-names = "rx", "tx";
dmas = <&edma2 10 0 FSL_EDMA_RX>, <&edma2 11 0 0>;
status = "disabled";
};
lpuart2: serial@5a080000 {
reg = <0x5a080000 0x1000>;
interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
<&uart2_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_2>;
dma-names = "rx", "tx";
dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 13 0 0>;
status = "disabled";
};
lpuart3: serial@5a090000 {
reg = <0x5a090000 0x1000>;
interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
<&uart3_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "baud";
assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_3>;
dma-names = "rx", "tx";
dmas = <&edma2 14 0 FSL_EDMA_RX>, <&edma2 15 0 0>;
status = "disabled";
};
adma_pwm: pwm@5a190000 {
compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
reg = <0x5a190000 0x1000>;
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>,
<&adma_pwm_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "per";
assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
#pwm-cells = <3>;
power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
};
edma2: dma-controller@5a1f0000 {
compatible = "fsl,imx8qm-edma";
reg = <0x5a1f0000 0x170000>;
#dma-cells = <3>;
dma-channels = <16>;
interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd IMX_SC_R_DMA_2_CH0>,
<&pd IMX_SC_R_DMA_2_CH1>,
<&pd IMX_SC_R_DMA_2_CH2>,
<&pd IMX_SC_R_DMA_2_CH3>,
<&pd IMX_SC_R_DMA_2_CH4>,
<&pd IMX_SC_R_DMA_2_CH5>,
<&pd IMX_SC_R_DMA_2_CH6>,
<&pd IMX_SC_R_DMA_2_CH7>,
<&pd IMX_SC_R_DMA_2_CH8>,
<&pd IMX_SC_R_DMA_2_CH9>,
<&pd IMX_SC_R_DMA_2_CH10>,
<&pd IMX_SC_R_DMA_2_CH11>,
<&pd IMX_SC_R_DMA_2_CH12>,
<&pd IMX_SC_R_DMA_2_CH13>,
<&pd IMX_SC_R_DMA_2_CH14>,
<&pd IMX_SC_R_DMA_2_CH15>;
};
spi0_lpcg: clock-controller@5a400000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5a400000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>,
<&dma_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
clock-output-names = "spi0_lpcg_clk",
"spi0_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_SPI_0>;
};
spi1_lpcg: clock-controller@5a410000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5a410000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>,
<&dma_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
clock-output-names = "spi1_lpcg_clk",
"spi1_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_SPI_1>;
};
spi2_lpcg: clock-controller@5a420000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5a420000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>,
<&dma_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
clock-output-names = "spi2_lpcg_clk",
"spi2_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_SPI_2>;
};
spi3_lpcg: clock-controller@5a430000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5a430000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>,
<&dma_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
clock-output-names = "spi3_lpcg_clk",
"spi3_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_SPI_3>;
};
uart0_lpcg: clock-controller@5a460000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5a460000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>,
<&dma_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
clock-output-names = "uart0_lpcg_baud_clk",
"uart0_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_UART_0>;
};
uart1_lpcg: clock-controller@5a470000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5a470000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>,
<&dma_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
clock-output-names = "uart1_lpcg_baud_clk",
"uart1_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_UART_1>;
};
uart2_lpcg: clock-controller@5a480000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5a480000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>,
<&dma_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
clock-output-names = "uart2_lpcg_baud_clk",
"uart2_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_UART_2>;
};
uart3_lpcg: clock-controller@5a490000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5a490000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>,
<&dma_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
clock-output-names = "uart3_lpcg_baud_clk",
"uart3_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_UART_3>;
};
adma_pwm_lpcg: clock-controller@5a590000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5a590000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>,
<&dma_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
clock-output-names = "adma_pwm_lpcg_clk",
"adma_pwm_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
};
i2c0: i2c@5a800000 {
reg = <0x5a800000 0x4000>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>,
<&i2c0_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
power-domains = <&pd IMX_SC_R_I2C_0>;
status = "disabled";
};
i2c1: i2c@5a810000 {
reg = <0x5a810000 0x4000>;
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>,
<&i2c1_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
power-domains = <&pd IMX_SC_R_I2C_1>;
status = "disabled";
};
i2c2: i2c@5a820000 {
reg = <0x5a820000 0x4000>;
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>,
<&i2c2_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
power-domains = <&pd IMX_SC_R_I2C_2>;
status = "disabled";
};
i2c3: i2c@5a830000 {
reg = <0x5a830000 0x4000>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>,
<&i2c3_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
power-domains = <&pd IMX_SC_R_I2C_3>;
status = "disabled";
};
adc0: adc@5a880000 {
compatible = "nxp,imx8qxp-adc";
#io-channel-cells = <1>;
reg = <0x5a880000 0x10000>;
interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&adc0_lpcg IMX_LPCG_CLK_0>,
<&adc0_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
power-domains = <&pd IMX_SC_R_ADC_0>;
status = "disabled";
};
adc1: adc@5a890000 {
compatible = "nxp,imx8qxp-adc";
#io-channel-cells = <1>;
reg = <0x5a890000 0x10000>;
interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&adc1_lpcg IMX_LPCG_CLK_0>,
<&adc1_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
power-domains = <&pd IMX_SC_R_ADC_1>;
status = "disabled";
};
flexcan1: can@5a8d0000 {
compatible = "fsl,imx8qm-flexcan";
reg = <0x5a8d0000 0x10000>;
interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
<&can0_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "per";
assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <40000000>;
power-domains = <&pd IMX_SC_R_CAN_0>;
/* SLSlice[4] */
fsl,clk-source = /bits/ 8 <0>;
fsl,scu-index = /bits/ 8 <0>;
status = "disabled";
};
flexcan2: can@5a8e0000 {
compatible = "fsl,imx8qm-flexcan";
reg = <0x5a8e0000 0x10000>;
interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
/* CAN0 clock and PD is shared among all CAN instances as
* CAN1 shares CAN0's clock and to enable CAN0's clock it
* has to be powered on.
*/
clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
<&can0_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "per";
assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <40000000>;
power-domains = <&pd IMX_SC_R_CAN_1>;
/* SLSlice[4] */
fsl,clk-source = /bits/ 8 <0>;
fsl,scu-index = /bits/ 8 <1>;
status = "disabled";
};
flexcan3: can@5a8f0000 {
compatible = "fsl,imx8qm-flexcan";
reg = <0x5a8f0000 0x10000>;
interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
/* CAN0 clock and PD is shared among all CAN instances as
* CAN2 shares CAN0's clock and to enable CAN0's clock it
* has to be powered on.
*/
clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
<&can0_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "per";
assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <40000000>;
power-domains = <&pd IMX_SC_R_CAN_2>;
/* SLSlice[4] */
fsl,clk-source = /bits/ 8 <0>;
fsl,scu-index = /bits/ 8 <2>;
status = "disabled";
};
edma3: dma-controller@5a9f0000 {
compatible = "fsl,imx8qm-edma";
reg = <0x5a9f0000 0x90000>;
#dma-cells = <3>;
dma-channels = <8>;
interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
<&pd IMX_SC_R_DMA_3_CH1>,
<&pd IMX_SC_R_DMA_3_CH2>,
<&pd IMX_SC_R_DMA_3_CH3>,
<&pd IMX_SC_R_DMA_3_CH4>,
<&pd IMX_SC_R_DMA_3_CH5>,
<&pd IMX_SC_R_DMA_3_CH6>,
<&pd IMX_SC_R_DMA_3_CH7>;
};
i2c0_lpcg: clock-controller@5ac00000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5ac00000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>,
<&dma_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
clock-output-names = "i2c0_lpcg_clk",
"i2c0_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_I2C_0>;
};
i2c1_lpcg: clock-controller@5ac10000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5ac10000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>,
<&dma_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
clock-output-names = "i2c1_lpcg_clk",
"i2c1_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_I2C_1>;
};
i2c2_lpcg: clock-controller@5ac20000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5ac20000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>,
<&dma_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
clock-output-names = "i2c2_lpcg_clk",
"i2c2_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_I2C_2>;
};
i2c3_lpcg: clock-controller@5ac30000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5ac30000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>,
<&dma_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
clock-output-names = "i2c3_lpcg_clk",
"i2c3_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_I2C_3>;
};
adc0_lpcg: clock-controller@5ac80000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5ac80000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>,
<&dma_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
clock-output-names = "adc0_lpcg_clk",
"adc0_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_ADC_0>;
};
adc1_lpcg: clock-controller@5ac90000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5ac90000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>,
<&dma_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
clock-output-names = "adc1_lpcg_clk",
"adc1_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_ADC_1>;
};
can0_lpcg: clock-controller@5acd0000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5acd0000 0x10000>;
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>,
<&dma_ipg_clk>, <&dma_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
clock-output-names = "can0_lpcg_pe_clk",
"can0_lpcg_ipg_clk",
"can0_lpcg_chi_clk";
power-domains = <&pd IMX_SC_R_CAN_0>;
};
};
Codebase Browser
linux