// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
#include "msm8916-pm8916.dtsi"
#include "msm8916-modem-qdsp6.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "BQ Aquaris X5 (Longcheer L8910)";
compatible = "longcheer,l8910", "qcom,msm8916";
chassis-type = "handset";
aliases {
mmc0 = &sdhc_1; /* eMMC */
mmc1 = &sdhc_2; /* SD card */
serial0 = &blsp_uart2;
};
chosen {
stdout-path = "serial0";
};
speaker_amp: audio-amplifier {
compatible = "awinic,aw8738";
mode-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
awinic,mode = <5>;
sound-name-prefix = "Speaker Amp";
pinctrl-0 = <&spk_ext_pa_default>;
pinctrl-names = "default";
};
flash-led-controller {
compatible = "ocs,ocp8110";
enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
flash-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&camera_front_flash_default>;
pinctrl-names = "default";
flash_led: led {
function = LED_FUNCTION_FLASH;
color = <LED_COLOR_ID_WHITE>;
flash-max-timeout-us = <250000>;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_default>;
label = "GPIO Buttons";
button-volume-up {
label = "Volume Up";
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
};
leds {
compatible = "gpio-leds";
led-0 {
gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_WHITE>;
default-state = "off";
function = LED_FUNCTION_KBD_BACKLIGHT;
pinctrl-names = "default";
pinctrl-0 = <&button_backlight_default>;
};
};
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_id_default>;
};
};
&blsp_i2c2 {
status = "okay";
led-controller@30 {
compatible = "kinetic,ktd2026";
reg = <0x30>;
#address-cells = <1>;
#size-cells = <0>;
vin-supply = <&pm8916_l17>;
vio-supply = <&pm8916_l6>;
pinctrl-0 = <&status_led_default>;
pinctrl-names = "default";
multi-led {
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_STATUS;
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_RED>;
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_GREEN>;
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_BLUE>;
};
};
};
};
&blsp_i2c3 {
status = "okay";
magnetometer@d {
compatible = "asahi-kasei,ak09911";
reg = <0x0d>;
vdd-supply = <&pm8916_l17>;
vid-supply = <&pm8916_l6>;
reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&mag_reset_default>;
};
imu@68 {
compatible = "bosch,bmi160";
reg = <0x68>;
vdd-supply = <&pm8916_l17>;
vddio-supply = <&pm8916_l6>;
mount-matrix = "0", "1", "0",
"-1", "0", "0",
"0", "0", "1";
};
};
&blsp_uart2 {
status = "okay";
};
&mpss_mem {
reg = <0x0 0x86800000 0x0 0x5000000>;
};
&pm8916_codec {
qcom,micbias-lvl = <2800>;
qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
qcom,hphl-jack-type-normally-open;
};
&pm8916_gpios {
status_led_default: status-led-default-state {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <PM8916_GPIO_VPH>;
bias-disable;
output-high;
};
};
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
&pm8916_rpm_regulators {
pm8916_l17: l17 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
};
&pm8916_vib {
status = "okay";
};
&sdhc_1 {
status = "okay";
};
&sdhc_2 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
};
&sound {
/*
* Provide widgets/pin-switches to allow enabling speaker separately.
* The hardware does not provide a way to disable the output via the
* headphone jack when the speaker is enabled.
*/
model = "bq-paella";
widgets =
"Speaker", "Speaker",
"Headphone", "Headphones";
pin-switches = "Speaker";
audio-routing =
"Speaker", "Speaker Amp OUT",
"Speaker Amp IN", "HPH_R",
"Headphones", "HPH_L",
"Headphones", "HPH_R",
"AMIC1", "MIC BIAS External1",
"AMIC2", "MIC BIAS Internal2",
"AMIC3", "MIC BIAS External1";
aux-devs = <&speaker_amp>;
};
&usb {
status = "okay";
extcon = <&usb_id>, <&usb_id>;
};
&usb_hs_phy {
extcon = <&usb_id>;
};
&venus {
status = "okay";
};
&venus_mem {
status = "okay";
};
&wcnss {
status = "okay";
};
&wcnss_iris {
compatible = "qcom,wcn3620";
};
&wcnss_mem {
status = "okay";
};
&tlmm {
button_backlight_default: button-backlight-default-state {
pins = "gpio17";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
camera_front_flash_default: camera-front-flash-default-state {
pins = "gpio49", "gpio119";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
gpio_keys_default: gpio-keys-default-state {
pins = "gpio107";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
mag_reset_default: mag-reset-default-state {
pins = "gpio111";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
sdc2_cd_default: sdc2-cd-default-state {
pins = "gpio38";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
spk_ext_pa_default: spk-ext-pa-default-state {
pins = "gpio114";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
usb_id_default: usb-id-default-state {
pins = "gpio110";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
};
Codebase Browser
linux