// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
#include "msm8939-pm8916.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
/ {
model = "BQ Aquaris M5 (Longcheer L9100)";
compatible = "longcheer,l9100", "qcom,msm8939";
chassis-type = "handset";
aliases {
mmc0 = &sdhc_1; /* eMMC */
mmc1 = &sdhc_2; /* SD card */
serial0 = &blsp_uart2;
};
chosen {
stdout-path = "serial0";
};
gpio-hall-sensor {
compatible = "gpio-keys";
pinctrl-0 = <&gpio_hall_sensor_default>;
pinctrl-names = "default";
label = "GPIO Hall Effect Sensor";
event-hall-sensor {
label = "Hall Effect Sensor";
gpios = <&tlmm 20 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
linux,can-disable;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&gpio_keys_default>;
pinctrl-names = "default";
label = "GPIO Buttons";
button-volume-up {
label = "Volume Up";
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
};
leds {
compatible = "gpio-leds";
led-0 {
gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_WHITE>;
default-state = "off";
function = LED_FUNCTION_KBD_BACKLIGHT;
pinctrl-0 = <&button_backlight_default>;
pinctrl-names = "default";
};
};
reg_ts_vdd: regulator-vdd-ts {
compatible = "regulator-fixed";
regulator-name = "regulator-vdd-ts";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&ts_vdd_default>;
pinctrl-names = "default";
};
backlight {
compatible = "pwm-backlight";
pwms = <&pm8916_pwm 0 100000>;
brightness-levels = <0 255>;
num-interpolated-steps = <255>;
default-brightness-level = <128>;
enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&lcd_bl_en_default>;
pinctrl-names = "default";
};
flash-led-controller {
compatible = "ocs,ocp8110";
flash-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&camera_front_flash_default>;
pinctrl-names = "default";
led {
function = LED_FUNCTION_FLASH;
color = <LED_COLOR_ID_WHITE>;
flash-max-timeout-us = <250000>;
};
};
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&usb_id_default &usb_id_switch_default>;
pinctrl-names = "default";
};
};
&blsp_i2c2 {
status = "okay";
led-controller@30 {
compatible = "kinetic,ktd2026";
reg = <0x30>;
#address-cells = <1>;
#size-cells = <0>;
vin-supply = <&pm8916_l17>;
vio-supply = <&pm8916_l6>;
pinctrl-0 = <&status_led_default>;
pinctrl-names = "default";
multi-led {
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_STATUS;
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_RED>;
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_GREEN>;
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_BLUE>;
};
};
};
};
&blsp_i2c3 {
status = "okay";
magnetometer@d {
compatible = "asahi-kasei,ak09911";
reg = <0x0d>;
vdd-supply = <&pm8916_l17>;
vid-supply = <&pm8916_l6>;
reset-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mag_reset_default>;
pinctrl-names = "default";
};
light-sensor@23 {
compatible = "liteon,ltr559";
reg = <0x23>;
proximity-near-level = <75>;
vdd-supply = <&pm8916_l17>;
vddio-supply = <&pm8916_l5>;
interrupts-extended = <&tlmm 113 IRQ_TYPE_EDGE_FALLING>;
pinctrl-0 = <&light_int_default>;
pinctrl-names = "default";
};
imu@68 {
compatible = "bosch,bmi160";
reg = <0x68>;
vdd-supply = <&pm8916_l17>;
vddio-supply = <&pm8916_l6>;
};
};
&blsp_i2c5 {
status = "okay";
touchscreen@4a {
compatible = "atmel,maxtouch";
reg = <0x4a>;
interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
vdda-supply = <&pm8916_l6>;
vdd-supply = <®_ts_vdd>;
pinctrl-0 = <&ts_int_reset_default>;
pinctrl-names = "default";
/* Keys listed from right to left */
linux,keycodes = <KEY_APPSELECT KEY_HOMEPAGE KEY_BACK>;
};
};
&blsp_uart2 {
status = "okay";
};
&pm8916_gpios {
status_led_default: status-led-default-state {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <PM8916_GPIO_VPH>;
bias-disable;
output-high;
};
};
&pm8916_mpps {
pwm_out: mpp4-state {
pins = "mpp4";
function = "digital";
power-source = <PM8916_MPP_VPH>;
output-low;
qcom,dtest = <1>;
};
};
&pm8916_pwm {
pinctrl-0 = <&pwm_out>;
pinctrl-names = "default";
status = "okay";
};
&pm8916_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&pm8916_rpm_regulators {
pm8916_l17: l17 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
};
&pm8916_vib {
status = "okay";
};
&sdhc_1 {
status = "okay";
};
&sdhc_2 {
pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
pinctrl-names = "default", "sleep";
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
status = "okay";
};
&usb {
extcon = <&usb_id>, <&usb_id>;
status = "okay";
};
&usb_hs_phy {
extcon = <&usb_id>;
};
&wcnss {
status = "okay";
};
&wcnss_iris {
compatible = "qcom,wcn3620";
};
&wcnss_mem {
status = "okay";
};
&tlmm {
button_backlight_default: button-backlight-default-state {
pins = "gpio17";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
camera_front_flash_default: camera-front-flash-default-state {
pins = "gpio8", "gpio49";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
gpio_hall_sensor_default: gpio-hall-sensor-default-state {
pins = "gpio20";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
gpio_keys_default: gpio-keys-default-state {
pins = "gpio107";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
lcd_bl_en_default: lcd-bl-en-default-state {
pins = "gpio98";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
light_int_default: light-int-default-state {
pins = "gpio113";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
mag_reset_default: mag-reset-default-state {
pins = "gpio68";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
sdc2_cd_default: sdc2-cd-default-state {
pins = "gpio38";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
ts_int_reset_default: ts-int-reset-default-state {
pins = "gpio12", "gpio13";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
ts_vdd_default: ts-vdd-default-state {
pins = "gpio78";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
usb_id_default: usb-id-default-state {
pins = "gpio110";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
usb_id_switch_default: usb-id-switch-default-state {
pins = "gpio121";
function = "gpio";
drive-strength = <2>;
output-high;
};
};
Codebase Browser
linux