// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2023, Linaro Limited
*/
/dts-v1/;
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm8650.dtsi"
#include "pm8010.dtsi"
#include "pm8550.dtsi"
#include "pm8550b.dtsi"
#define PMK8550VE_SID 8
#include "pm8550ve.dtsi"
#include "pm8550vs.dtsi"
#include "pmk8550.dtsi"
#include "pmr735d_a.dtsi"
/ {
model = "Qualcomm Technologies, Inc. SM8650 MTP";
compatible = "qcom,sm8650-mtp", "qcom,sm8650";
aliases {
serial0 = &uart15;
};
chosen {
stdout-path = "serial0:115200n8";
};
pmic-glink {
compatible = "qcom,sm8650-pmic-glink",
"qcom,sm8550-pmic-glink",
"qcom,pmic-glink";
#address-cells = <1>;
#size-cells = <0>;
orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
connector@0 {
compatible = "usb-c-connector";
reg = <0>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_hs_in: endpoint {
remote-endpoint = <&usb_1_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss_in: endpoint {
remote-endpoint = <&usb_dp_qmpphy_out>;
};
};
};
};
};
sound {
compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard";
model = "SM8650-MTP";
audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
"SpkrRight IN", "WSA_SPK2 OUT";
wsa-dai-link {
link-name = "WSA Playback";
cpu {
sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
};
codec {
sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
};
platform {
sound-dai = <&q6apm>;
};
};
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
regulator-boot-on;
};
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm8550-rpmh-regulators";
vdd-bob1-supply = <&vph_pwr>;
vdd-bob2-supply = <&vph_pwr>;
vdd-l2-l13-l14-supply = <&vreg_bob1>;
vdd-l3-supply = <&vreg_s1c_1p2>;
vdd-l5-l16-supply = <&vreg_bob1>;
vdd-l6-l7-supply = <&vreg_bob1>;
vdd-l8-l9-supply = <&vreg_bob1>;
vdd-l11-supply = <&vreg_s1c_1p2>;
vdd-l12-supply = <&vreg_s6c_1p8>;
vdd-l15-supply = <&vreg_s6c_1p8>;
vdd-l17-supply = <&vreg_bob2>;
qcom,pmic-id = "b";
vreg_bob1: bob1 {
regulator-name = "vreg_bob1";
regulator-min-microvolt = <3296000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_bob2: bob2 {
regulator-name = "vreg_bob2";
regulator-min-microvolt = <2720000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2b_3p0: ldo2 {
regulator-name = "vreg_l2b_3p0";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5b_3p1: ldo5 {
regulator-name = "vreg_l5b_3p1";
regulator-min-microvolt = <3104000>;
regulator-max-microvolt = <3104000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6b_1p8: ldo6 {
regulator-name = "vreg_l6b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7b_1p8: ldo7 {
regulator-name = "vreg_l7b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8b_1p8: ldo8 {
regulator-name = "vreg_l8b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9b_2p9: ldo9 {
regulator-name = "vreg_l9b_2p9";
regulator-min-microvolt = <2960000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11b_1p2: ldo11 {
regulator-name = "vreg_l11b_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12b_1p8: ldo12 {
regulator-name = "vreg_l12b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13b_3p0: ldo13 {
regulator-name = "vreg_l13b_3p0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14b_3p2: ldo14 {
regulator-name = "vreg_l14b_3p2";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15b_1p8: ldo15 {
regulator-name = "vreg_l15b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16b_2p8: ldo16 {
regulator-name = "vreg_l16b_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17b_2p5: ldo17 {
regulator-name = "vreg_l17b_2p5";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm8550vs-rpmh-regulators";
vdd-l1-supply = <&vreg_s1c_1p2>;
vdd-l2-supply = <&vreg_s1c_1p2>;
vdd-l3-supply = <&vreg_s1c_1p2>;
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
qcom,pmic-id = "c";
vreg_s1c_1p2: smps1 {
regulator-name = "vreg_s1c_1p2";
regulator-min-microvolt = <1256000>;
regulator-max-microvolt = <1348000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s2c_0p8: smps2 {
regulator-name = "vreg_s2c_0p8";
regulator-min-microvolt = <852000>;
regulator-max-microvolt = <1036000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s3c_0p9: smps3 {
regulator-name = "vreg_s3c_0p9";
regulator-min-microvolt = <976000>;
regulator-max-microvolt = <1064000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s4c_1p2: smps4 {
regulator-name = "vreg_s4c_1p2";
regulator-min-microvolt = <1224000>;
regulator-max-microvolt = <1280000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s5c_0p7: smps5 {
regulator-name = "vreg_s5c_0p7";
regulator-min-microvolt = <752000>;
regulator-max-microvolt = <900000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s6c_1p8: smps6 {
regulator-name = "vreg_s6c_1p8";
regulator-min-microvolt = <1856000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1c_1p2: ldo1 {
regulator-name = "vreg_l1c_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c_1p2: ldo3 {
regulator-name = "vreg_l3c_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-2 {
compatible = "qcom,pm8550vs-rpmh-regulators";
vdd-l1-supply = <&vreg_s3c_0p9>;
qcom,pmic-id = "d";
vreg_l1d_0p88: ldo1 {
regulator-name = "vreg_l1d_0p88";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-3 {
compatible = "qcom,pm8550vs-rpmh-regulators";
vdd-l3-supply = <&vreg_s3c_0p9>;
qcom,pmic-id = "e";
vreg_l3e_0p9: ldo3 {
regulator-name = "vreg_l3e_0p9";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-4 {
compatible = "qcom,pm8550vs-rpmh-regulators";
vdd-l1-supply = <&vreg_s3c_0p9>;
vdd-l3-supply = <&vreg_s3c_0p9>;
qcom,pmic-id = "g";
vreg_l1g_0p91: ldo1 {
regulator-name = "vreg_l1g_0p91";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3g_0p91: ldo3 {
regulator-name = "vreg_l3g_0p91";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-5 {
compatible = "qcom,pm8550ve-rpmh-regulators";
vdd-l1-supply = <&vreg_s3c_0p9>;
vdd-l2-supply = <&vreg_s3c_0p9>;
vdd-l3-supply = <&vreg_s1c_1p2>;
vdd-s4-supply = <&vph_pwr>;
qcom,pmic-id = "i";
vreg_s4i_0p85: smps4 {
regulator-name = "vreg_s4i_0p85";
regulator-min-microvolt = <852000>;
regulator-max-microvolt = <1004000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1i_0p88: ldo1 {
regulator-name = "vreg_l1i_0p88";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2i_0p88: ldo2 {
regulator-name = "vreg_l2i_0p88";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3i_1p2: ldo3 {
regulator-name = "vreg_l3i_0p91";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-6 {
compatible = "qcom,pm8010-rpmh-regulators";
qcom,pmic-id = "m";
vdd-l1-l2-supply = <&vreg_s1c_1p2>;
vdd-l3-l4-supply = <&vreg_bob2>;
vdd-l5-supply = <&vreg_s6c_1p8>;
vdd-l6-supply = <&vreg_bob1>;
vdd-l7-supply = <&vreg_bob1>;
vreg_l1m_1p1: ldo1 {
regulator-name = "vreg_l1m_1p1";
regulator-min-microvolt = <1104000>;
regulator-max-microvolt = <1104000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2m_1p056: ldo2 {
regulator-name = "vreg_l2m_1p056";
regulator-min-microvolt = <1056000>;
regulator-max-microvolt = <1056000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3m_2p8: ldo3 {
regulator-name = "vreg_l3m_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4m_2p8: ldo4 {
regulator-name = "vreg_l4m_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5m_1p8: ldo5 {
regulator-name = "vreg_l5m_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6m_2p8: ldo6 {
regulator-name = "vreg_l6m_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7m_2p96: ldo7 {
regulator-name = "vreg_l7m_2p96";
regulator-min-microvolt = <2960000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-7 {
compatible = "qcom,pm8010-rpmh-regulators";
qcom,pmic-id = "n";
vdd-l1-l2-supply = <&vreg_s1c_1p2>;
vdd-l3-l4-supply = <&vreg_s6c_1p8>;
vdd-l5-supply = <&vreg_bob2>;
vdd-l6-supply = <&vreg_bob2>;
vdd-l7-supply = <&vreg_bob1>;
vreg_l1n_1p1: ldo1 {
regulator-name = "vreg_l1n_1p1";
regulator-min-microvolt = <1104000>;
regulator-max-microvolt = <1104000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2n_1p056: ldo2 {
regulator-name = "vreg_l2n_1p056";
regulator-min-microvolt = <1056000>;
regulator-max-microvolt = <1056000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3n_1p8: ldo3 {
regulator-name = "vreg_l3n_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4n_1p8: ldo4 {
regulator-name = "vreg_l4n_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5n_2p8: ldo5 {
regulator-name = "vreg_l5n_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6n_2p8: ldo6 {
regulator-name = "vreg_l6n_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7n_3p3: ldo7 {
regulator-name = "vreg_l7n_3p3";
regulator-min-microvolt = <3304000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
&dispcc {
status = "okay";
};
&lpass_tlmm {
spkr_1_sd_n_active: spkr-1-sd-n-active-state {
pins = "gpio21";
function = "gpio";
drive-strength = <16>;
bias-disable;
output-low;
};
};
&mdss {
status = "okay";
};
&mdss_dsi0 {
vdda-supply = <&vreg_l3i_1p2>;
status = "okay";
panel@0 {
compatible = "visionox,vtdr6130";
reg = <0>;
reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
vddio-supply = <&vreg_l12b_1p8>;
vci-supply = <&vreg_l13b_3p0>;
vdd-supply = <&vreg_l11b_1p2>;
pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
pinctrl-names = "default", "sleep";
port {
panel0_in: endpoint {
remote-endpoint = <&mdss_dsi0_out>;
};
};
};
};
&mdss_dsi0_out {
remote-endpoint = <&panel0_in>;
data-lanes = <0 1 2 3>;
};
&mdss_dsi0_phy {
vdds-supply = <&vreg_l1i_0p88>;
status = "okay";
};
&pcie0 {
wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_default_state>;
pinctrl-names = "default";
status = "okay";
};
&pcie0_phy {
vdda-phy-supply = <&vreg_l1i_0p88>;
vdda-pll-supply = <&vreg_l3i_1p2>;
status = "okay";
};
&pcie1 {
wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_default_state>;
pinctrl-names = "default";
status = "okay";
};
&pcie1_phy {
vdda-phy-supply = <&vreg_l3e_0p9>;
vdda-pll-supply = <&vreg_l3i_1p2>;
vdda-qref-supply = <&vreg_l1i_0p88>;
status = "okay";
};
&pm8550_gpios {
sdc2_card_det_n: sdc2-card-det-state {
pins = "gpio12";
function = "normal";
bias-pull-up;
input-enable;
output-disable;
power-source = <1>; /* 1.8 V */
};
};
&pm8550b_eusb2_repeater {
vdd18-supply = <&vreg_l15b_1p8>;
vdd3-supply = <&vreg_l5b_3p1>;
};
&qupv3_id_1 {
status = "okay";
};
&remoteproc_adsp {
firmware-name = "qcom/sm8650/adsp.mbn",
"qcom/sm8650/adsp_dtb.mbn";
status = "okay";
};
&remoteproc_cdsp {
firmware-name = "qcom/sm8650/cdsp.mbn",
"qcom/sm8650/cdsp_dtb.mbn";
status = "okay";
};
&remoteproc_mpss {
firmware-name = "qcom/sm8650/modem.mbn",
"qcom/sm8650/modem_dtb.mbn";
status = "okay";
};
&sdhc_2 {
cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vreg_l9b_2p9>;
vqmmc-supply = <&vreg_l8b_1p8>;
bus-width = <4>;
no-sdio;
no-mmc;
pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
pinctrl-names = "default", "sleep";
status = "okay";
};
&sleep_clk {
clock-frequency = <32000>;
};
&swr0 {
status = "okay";
/* WSA8845, Speaker Left */
left_spkr: speaker@0,0 {
compatible = "sdw20217020400";
reg = <0 0>;
pinctrl-0 = <&spkr_1_sd_n_active>;
pinctrl-names = "default";
powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "SpkrLeft";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l3c_1p2>;
/*
* WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L)
* WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP)
* WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST)
* WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR)
* WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
* WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS)
*/
qcom,port-mapping = <1 2 3 7 10 13>;
};
/* WSA8845, Speaker Right */
right_spkr: speaker@0,1 {
compatible = "sdw20217020400";
reg = <0 1>;
pinctrl-0 = <&spkr_2_sd_n_active>;
pinctrl-names = "default";
powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "SpkrRight";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l3c_1p2>;
/*
* WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R)
* WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP)
* WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST)
* WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR)
* WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
* WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS)
*/
qcom,port-mapping = <4 5 6 7 11 13>;
};
};
&tlmm {
/* Reserved I/Os for NFC */
gpio-reserved-ranges = <32 8>, <74 1>;
disp0_reset_n_active: disp0-reset-n-active-state {
pins = "gpio133";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
disp0_reset_n_suspend: disp0-reset-n-suspend-state {
pins = "gpio133";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
mdp_vsync_active: mdp-vsync-active-state {
pins = "gpio86";
function = "mdp_vsync";
drive-strength = <2>;
bias-pull-down;
};
mdp_vsync_suspend: mdp-vsync-suspend-state {
pins = "gpio86";
function = "mdp_vsync";
drive-strength = <2>;
bias-pull-down;
};
spkr_2_sd_n_active: spkr-2-sd-n-active-state {
pins = "gpio77";
function = "gpio";
drive-strength = <16>;
bias-disable;
output-low;
};
};
&uart15 {
status = "okay";
};
&ufs_mem_hc {
reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l17b_2p5>;
vcc-max-microamp = <1300000>;
vccq-supply = <&vreg_l1c_1p2>;
vccq-max-microamp = <1200000>;
status = "okay";
};
&ufs_mem_phy {
vdda-phy-supply = <&vreg_l1d_0p88>;
vdda-pll-supply = <&vreg_l3i_1p2>;
status = "okay";
};
/*
* DPAUX -> WCD9395 -> USB_SBU -> USB-C
* eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C
* USB SS -> USB-C
*/
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "otg";
usb-role-switch;
};
&usb_1_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in>;
};
&usb_1_hsphy {
vdd-supply = <&vreg_l1i_0p88>;
vdda12-supply = <&vreg_l3i_1p2>;
phys = <&pm8550b_eusb2_repeater>;
status = "okay";
};
&usb_dp_qmpphy {
vdda-phy-supply = <&vreg_l3i_1p2>;
vdda-pll-supply = <&vreg_l3g_0p91>;
status = "okay";
};
&usb_dp_qmpphy_out {
remote-endpoint = <&pmic_glink_ss_in>;
};
&xo_board {
clock-frequency = <76800000>;
};
Codebase Browser
linux