// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2023, Linaro Limited
*/
/dts-v1/;
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/sound/cs35l45.h>
#include "sm8550.dtsi"
#include "pm8010.dtsi"
#include "pm8550.dtsi"
#include "pm8550b.dtsi"
#define PMK8550VE_SID 5
#include "pm8550ve.dtsi"
#include "pm8550vs.dtsi"
#include "pmk8550.dtsi"
/* TODO: Only one SID of PMR735D seems accessible? */
/delete-node/ &hwfence_shbuf;
/delete-node/ &mpss_mem;
/delete-node/ &rmtfs_mem;
/ {
model = "Sony Xperia 1 V";
compatible = "sony,pdx234", "qcom,sm8550";
chassis-type = "handset";
aliases {
i2c0 = &i2c0;
i2c4 = &i2c4;
i2c10 = &i2c10;
i2c11 = &i2c11;
i2c16 = &i2c_hub_2;
serial0 = &uart7;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
label = "gpio-keys";
pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
pinctrl-names = "default";
key-camera-focus {
label = "Camera Focus";
linux,code = <KEY_CAMERA_FOCUS>;
gpios = <&pm8550b_gpios 8 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
key-camera-snapshot {
label = "Camera Snapshot";
gpios = <&pm8550b_gpios 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_CAMERA>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
key-volume-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
};
pmic-glink {
compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
connector@0 {
compatible = "usb-c-connector";
reg = <0>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_hs_in: endpoint {
remote-endpoint = <&usb_1_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss_in: endpoint {
remote-endpoint = <&usb_dp_qmpphy_out>;
};
};
};
};
};
reserved-memory {
mpss_mem: mpss-region@89800000 {
reg = <0x0 0x89800000 0x0 0x10800000>;
no-map;
};
splash@b8000000 {
reg = <0x0 0xb8000000 0x0 0x2b00000>;
no-map;
};
hwfence_shbuf: hwfence-shbuf-region@e6440000 {
reg = <0x0 0xe6440000 0x0 0x2dd000>;
no-map;
};
rmtfs_mem: memory@f8b00000 {
compatible = "qcom,rmtfs-mem";
reg = <0x0 0xf8b00000 0x0 0x280000>;
no-map;
qcom,client-id = <1>;
qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
};
ramoops@ffd00000 {
compatible = "ramoops";
reg = <0x0 0xffd00000 0x0 0xc0000>;
console-size = <0x40000>;
record-size = <0x1000>;
pmsg-size = <0x40000>;
ecc-size = <16>;
};
rdtag-store-region@ffdc0000 {
reg = <0x0 0xffdc0000 0x0 0x40000>;
no-map;
};
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
regulator-boot-on;
};
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm8550-rpmh-regulators";
qcom,pmic-id = "b";
pm8550_bob1: bob1 {
regulator-name = "pm8550_bob1";
regulator-min-microvolt = <3416000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/* TODO: bob2 @ 2.704-3.008V doesn't fall into the vreg driver constraints */
pm8550_l1: ldo1 {
regulator-name = "pm8550_l1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550_l2: ldo2 {
regulator-name = "pm8550_l2";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/* L4 exists in cmd-db, but the board seems to crash on access */
pm8550_l5: ldo5 {
regulator-name = "pm8550_l5";
regulator-min-microvolt = <3104000>;
regulator-max-microvolt = <3104000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550_l6: ldo6 {
regulator-name = "pm8550_l6";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550_l7: ldo7 {
regulator-name = "pm8550_l7";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550_l8: ldo8 {
regulator-name = "pm8550_l8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550_l9: ldo9 {
regulator-name = "pm8550_l9";
regulator-min-microvolt = <2960000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550_l10: ldo10 {
regulator-name = "pm8550_l10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550_l11: ldo11 {
regulator-name = "pm8550_l11";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550_l12: ldo12 {
regulator-name = "pm8550_l12";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550_l13: ldo13 {
regulator-name = "pm8550_l13";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550_l14: ldo14 {
regulator-name = "pm8550_l14";
regulator-min-microvolt = <3304000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550_l15: ldo15 {
regulator-name = "pm8550_l15";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550_l16: ldo16 {
regulator-name = "pm8550_l16";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550_l17: ldo17 {
regulator-name = "pm8550_l17";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm8550vs-rpmh-regulators";
qcom,pmic-id = "c";
pm8550vs_0_l1: ldo1 {
regulator-name = "pm8550vs_0_l1";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550vs_0_l3: ldo3 {
regulator-name = "pm8550vs_0_l3";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-2 {
compatible = "qcom,pm8550vs-rpmh-regulators";
qcom,pmic-id = "d";
pm8550vs_1_l1: ldo1 {
regulator-name = "pm8550vs_1_l1";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/* L3 exists in cmd-db, but the board seems to crash on access */
};
regulators-3 {
compatible = "qcom,pm8550vs-rpmh-regulators";
qcom,pmic-id = "e";
pm8550vs_2_s4: smps4 {
regulator-name = "pm8550vs_2_s4";
regulator-min-microvolt = <904000>;
regulator-max-microvolt = <984000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550vs_2_s5: smps5 {
regulator-name = "pm8550vs_2_s5";
regulator-min-microvolt = <1010000>;
regulator-max-microvolt = <1120000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550vs_2_l1: ldo1 {
regulator-name = "pm8550vs_2_l1";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550vs_2_l2: ldo2 {
regulator-name = "pm8550vs_2_l2";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <968000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550vs_2_l3: ldo3 {
regulator-name = "pm8550vs_2_l3";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-4 {
compatible = "qcom,pm8550ve-rpmh-regulators";
qcom,pmic-id = "f";
pm8550ve_s4: smps4 {
regulator-name = "pm8550ve_s4";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <700000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550ve_l1: ldo1 {
regulator-name = "pm8550ve_l1";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550ve_l2: ldo2 {
regulator-name = "pm8550ve_l2";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550ve_l3: ldo3 {
regulator-name = "pm8550ve_l3";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-5 {
compatible = "qcom,pm8550vs-rpmh-regulators";
qcom,pmic-id = "g";
pm8550vs_3_s1: smps1 {
regulator-name = "pm8550vs_3_s1";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550vs_3_s2: smps2 {
regulator-name = "pm8550vs_3_s2";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1036000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550vs_3_s3: smps3 {
regulator-name = "pm8550vs_3_s3";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1004000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550vs_3_s4: smps4 {
regulator-name = "pm8550vs_3_s4";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1352000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550vs_3_s5: smps5 {
regulator-name = "pm8550vs_3_s5";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1004000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550vs_3_s6: smps6 {
regulator-name = "pm8550vs_3_s6";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550vs_3_l1: ldo1 {
regulator-name = "pm8550vs_3_l1";
regulator-min-microvolt = <1144000>;
regulator-max-microvolt = <1256000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550vs_3_l2: ldo2 {
regulator-name = "pm8550vs_3_l2";
regulator-min-microvolt = <1104000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
pm8550vs_3_l3: ldo3 {
regulator-name = "pm8550vs_3_l3";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
/* TODO: Unknown PMIC @ k, l, PM8010 @ m, n */
};
&gpi_dma1 {
status = "okay";
};
&gpi_dma2 {
status = "okay";
};
&i2c_hub_2 {
clock-frequency = <400000>;
status = "okay";
pmic@75 {
compatible = "dlg,slg51000";
reg = <0x75>;
dlg,cs-gpios = <&pm8550vs_g_gpios 4 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&cam_pwr_a_cs>;
pinctrl-names = "default";
regulators {
slg51000_a_ldo1: ldo1 {
regulator-name = "slg51000_a_ldo1";
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <3300000>;
};
slg51000_a_ldo2: ldo2 {
regulator-name = "slg51000_a_ldo2";
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <3300000>;
};
slg51000_a_ldo3: ldo3 {
regulator-name = "slg51000_a_ldo3";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3750000>;
};
slg51000_a_ldo4: ldo4 {
regulator-name = "slg51000_a_ldo4";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3750000>;
};
slg51000_a_ldo5: ldo5 {
regulator-name = "slg51000_a_ldo5";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1200000>;
};
slg51000_a_ldo6: ldo6 {
regulator-name = "slg51000_a_ldo6";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1200000>;
};
slg51000_a_ldo7: ldo7 {
regulator-name = "slg51000_a_ldo7";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3750000>;
};
};
};
};
&i2c_master_hub_0 {
status = "okay";
};
&i2c0 {
clock-frequency = <1000000>;
status = "okay";
/* NXP NFC @ 28 */
};
&i2c4 {
clock-frequency = <400000>;
status = "okay";
/* LX Semi SW82907 touchscreen @ 28 */
};
&i2c10 {
clock-frequency = <1000000>;
status = "okay";
/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
};
&i2c11 {
clock-frequency = <1000000>;
status = "okay";
cs35l41_l: speaker-amp@30 {
compatible = "cirrus,cs35l45";
reg = <0x30>;
interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>;
#sound-dai-cells = <1>;
cirrus,gpio-ctrl2 {
gpio-ctrl = <0x2>;
};
};
cs35l41_r: speaker-amp@31 {
compatible = "cirrus,cs35l45";
reg = <0x31>;
interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>;
#sound-dai-cells = <1>;
cirrus,gpio-ctrl2 {
gpio-ctrl = <0x2>;
};
};
};
&pcie0 {
wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_default_state>;
pinctrl-names = "default";
status = "okay";
};
&pcie0_phy {
vdda-phy-supply = <&pm8550vs_2_l1>;
vdda-pll-supply = <&pm8550vs_2_l3>;
status = "okay";
};
&pm8550_flash {
status = "okay";
led-0 {
function = LED_FUNCTION_FLASH;
color = <LED_COLOR_ID_WHITE>;
led-sources = <1>, <4>;
led-max-microamp = <500000>;
flash-max-microamp = <1000000>;
flash-max-timeout-us = <1280000>;
function-enumerator = <0>;
};
led-1 {
function = LED_FUNCTION_FLASH;
color = <LED_COLOR_ID_YELLOW>;
led-sources = <2>, <3>;
led-max-microamp = <500000>;
flash-max-microamp = <1000000>;
flash-max-timeout-us = <1280000>;
function-enumerator = <1>;
};
};
&pm8550_gpios {
vol_down_n: volume-down-n-state {
pins = "gpio6";
function = "normal";
power-source = <1>;
bias-pull-up;
input-enable;
};
sdc2_card_det_n: sd-card-det-n-state {
pins = "gpio12";
function = "normal";
power-source = <1>;
bias-pull-down;
output-disable;
input-enable;
};
};
&pm8550b_gpios {
snapshot_n: snapshot-n-state {
pins = "gpio7";
function = "normal";
power-source = <1>;
bias-pull-up;
input-enable;
};
focus_n: focus-n-state {
pins = "gpio8";
function = "normal";
power-source = <1>;
bias-pull-up;
input-enable;
};
};
&pm8550vs_g_gpios {
cam_pwr_a_cs: cam-pwr-a-cs-state {
pins = "gpio4";
function = "normal";
power-source = <0x01>;
drive-push-pull;
output-low;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
};
};
&pm8550b_eusb2_repeater {
qcom,tune-usb2-disc-thres = /bits/ 8 <0x6>;
qcom,tune-usb2-amplitude = /bits/ 8 <0xf>;
qcom,tune-usb2-preem = /bits/ 8 <0x7>;
vdd18-supply = <&pm8550_l15>;
vdd3-supply = <&pm8550_l5>;
};
&pon_pwrkey {
status = "okay";
};
&pon_resin {
linux,code = <KEY_VOLUMEUP>;
status = "okay";
};
&qupv3_id_0 {
status = "okay";
};
&qupv3_id_1 {
status = "okay";
};
&remoteproc_adsp {
firmware-name = "qcom/sm8550/Sony/yodo/adsp.mbn",
"qcom/sm8550/Sony/yodo/adsp_dtb.mbn";
status = "okay";
};
&remoteproc_cdsp {
firmware-name = "qcom/sm8550/Sony/yodo/cdsp.mbn",
"qcom/sm8550/Sony/yodo/cdsp_dtb.mbn";
status = "okay";
};
&sdhc_2 {
cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
pinctrl-names = "default", "sleep";
vmmc-supply = <&pm8550_l9>;
vqmmc-supply = <&pm8550_l8>;
no-sdio;
no-mmc;
status = "okay";
};
&sleep_clk {
clock-frequency = <32000>;
};
&tlmm {
gpio-reserved-ranges = <32 8>;
};
&uart7 {
status = "okay";
};
&usb_1 {
status = "okay";
};
&usb_1_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in>;
};
&usb_1_hsphy {
vdd-supply = <&pm8550vs_2_l1>;
vdda12-supply = <&pm8550vs_2_l3>;
phys = <&pm8550b_eusb2_repeater>;
status = "okay";
};
&usb_dp_qmpphy {
vdda-phy-supply = <&pm8550vs_2_l3>;
vdda-pll-supply = <&pm8550ve_l3>;
status = "okay";
};
&usb_dp_qmpphy_out {
remote-endpoint = <&pmic_glink_ss_in>;
};
&xo_board {
clock-frequency = <76800000>;
};
Codebase Browser
linux