// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2021, The Linux Foundation. All rights reserved.
*/
/dts-v1/;
#include <dt-bindings/arm/qcom,ids.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm7125.dtsi"
#include "pm6150.dtsi"
#include "pm6150l.dtsi"
/delete-node/ &ipa_fw_mem;
/delete-node/ &rmtfs_mem;
/ {
chassis-type = "handset";
qcom,msm-id = <QCOM_ID_SM7125 0>;
chosen {
#address-cells = <2>;
#size-cells = <2>;
ranges;
framebuffer@9c000000 {
compatible = "simple-framebuffer";
reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
width = <1080>;
height = <2400>;
stride = <(1080 * 4)>;
format = "a8r8g8b8";
clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
};
};
gpio_keys: gpio-keys {
compatible = "gpio-keys";
key-vol-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
};
reserved-memory {
mpss_mem: memory@86000000 {
reg = <0x0 0x86000000 0x0 0x8400000>;
no-map;
};
venus_mem: memory@8ee00000 {
reg = <0x0 0x8ee00000 0x0 0x500000>;
no-map;
};
cdsp_mem: memory@8f300000 {
reg = <0x0 0x8f300000 0x0 0x1e00000>;
no-map;
};
adsp_mem: memory@91100000 {
reg = <0x0 0x91100000 0x0 0x2800000>;
no-map;
};
wlan_mem: memory@93900000 {
reg = <0x0 0x93900000 0x0 0x200000>;
no-map;
};
ipa_fw_mem: memory@93b00000 {
reg = <0x0 0x93b00000 0x0 0x10000>;
no-map;
};
gpu_mem: memory@93b15000 {
reg = <0x0 0x93b15000 0x0 0x2000>;
no-map;
};
cont_splash_mem: memory@9c000000 {
reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
no-map;
};
pstore_mem: ramoops@9d800000 {
compatible = "ramoops";
reg = <0x0 0x9d800000 0x0 0x400000>;
record-size = <0x80000>;
pmsg-size = <0x200000>;
console-size = <0x100000>;
};
rmtfs_mem: memory@fa601000 {
compatible = "qcom,rmtfs-mem";
reg = <0x0 0xfa601000 0x0 0x200000>;
no-map;
qcom,client-id = <1>;
qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
};
};
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm6150-rpmh-regulators";
qcom,pmic-id = "a";
vreg_s1a_1p1: smps1 {
regulator-min-microvolt = <1128000>;
regulator-max-microvolt = <1128000>;
};
vreg_s4a_1p0: smps4 {
regulator-min-microvolt = <824000>;
regulator-max-microvolt = <1120000>;
};
vreg_s5a_2p0: smps5 {
regulator-min-microvolt = <1744000>;
regulator-max-microvolt = <2040000>;
};
vreg_l1a_1p2: ldo1 {
regulator-min-microvolt = <1178000>;
regulator-max-microvolt = <1256000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2a_1p0: ldo2 {
regulator-min-microvolt = <944000>;
regulator-max-microvolt = <1056000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3a_1p0: ldo3 {
regulator-min-microvolt = <968000>;
regulator-max-microvolt = <1064000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4a_0p88: ldo4 {
regulator-min-microvolt = <824000>;
regulator-max-microvolt = <928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5a_2p7: ldo5 {
regulator-min-microvolt = <2496000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6a_0p6: ldo6 {
regulator-min-microvolt = <568000>;
regulator-max-microvolt = <648000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9a_0p664: ldo9 {
regulator-min-microvolt = <488000>;
regulator-max-microvolt = <800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10a_1p8: ldo10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1832000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11a_1p8: ldo11 {
regulator-min-microvolt = <1696000>;
regulator-max-microvolt = <1904000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12a_1p8: ldo12 {
regulator-min-microvolt = <1696000>;
regulator-max-microvolt = <1952000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13a_1p8: ldo13 {
regulator-min-microvolt = <1696000>;
regulator-max-microvolt = <1904000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14a_1p8: ldo14 {
regulator-min-microvolt = <1728000>;
regulator-max-microvolt = <1832000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15a_1p8: ldo15 {
regulator-min-microvolt = <1696000>;
regulator-max-microvolt = <1904000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16a_2p7: ldo16 {
regulator-min-microvolt = <2496000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17a_3p1: ldo17 {
regulator-min-microvolt = <2920000>;
regulator-max-microvolt = <3232000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l18a_3p0: ldo18 {
regulator-min-microvolt = <1696000>;
regulator-max-microvolt = <1904000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l19a_3p0: ldo19 {
regulator-min-microvolt = <2696000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm6150l-rpmh-regulators";
qcom,pmic-id = "c";
vreg_s8c_1p3: smps8 {
regulator-min-microvolt = <1120000>;
regulator-max-microvolt = <1408000>;
};
vreg_l1c_1p8: ldo1 {
regulator-min-microvolt = <1616000>;
regulator-max-microvolt = <1984000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c_1p3: ldo2 {
regulator-min-microvolt = <1168000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c_1p23: ldo3 {
regulator-min-microvolt = <1144000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c_1p8: ldo4 {
regulator-min-microvolt = <1648000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5c_1p8: ldo5 {
regulator-min-microvolt = <1648000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6c_3p0: ldo6 {
regulator-min-microvolt = <1648000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_3p0: ldo7 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3312000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8c_1p8: ldo8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1904000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9c_2p9: ldo9 {
regulator-min-microvolt = <2952000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_3p3: ldo10 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3400000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11c_3p3: ldo11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3400000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_bob: bob {
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
};
};
};
&dispcc {
/* HACK: disable until a panel driver is ready to retain simplefb */
status = "disabled";
};
&pm6150_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&pm6150_rtc {
status = "okay";
};
&sdhc_2 {
cd-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default","sleep";
pinctrl-0 = <&sdc2_on>;
pinctrl-1 = <&sdc2_off>;
vmmc-supply = <&vreg_l9c_2p9>;
vqmmc-supply = <&vreg_l6c_3p0>;
status = "okay";
};
&tlmm {
gpio-reserved-ranges = <0 4>, <34 4>, <59 4>;
sdc2_on: sdc2-on-state {
clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};
cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
sd-cd-pins {
pins = "gpio69";
function = "gpio";
bias-pull-up;
drive-strength = <2>;
};
};
sdc2_off: sdc2-off-state {
clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <2>;
};
cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <2>;
};
data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <2>;
};
sd-cd-pins {
pins = "gpio69";
function = "gpio";
bias-pull-up;
drive-strength = <2>;
};
};
};
&ufs_mem_hc {
vcc-supply = <&vreg_l19a_3p0>;
vcc-max-microamp = <600000>;
vccq2-supply = <&vreg_l12a_1p8>;
vccq2-max-microamp = <600000>;
status = "okay";
};
&ufs_mem_phy {
vdda-phy-supply = <&vreg_l4a_0p88>;
vdda-pll-supply = <&vreg_l3c_1p23>;
status = "okay";
};
&usb_1 {
qcom,select-utmi-as-pipe-clk;
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "peripheral";
maximum-speed = "high-speed";
status = "okay";
};
&usb_1_hsphy {
vdd-supply = <&vreg_l4a_0p88>;
vdda-phy-dpdm-supply = <&vreg_l17a_3p1>;
vdda-pll-supply = <&vreg_l11a_1p8>;
status = "okay";
};
&usb_1_qmpphy {
vdda-phy-supply = <&vreg_l4a_0p88>;
vdda-pll-supply = <&vreg_l3c_1p23>;
status = "okay";
};
Codebase Browser
linux