// SPDX-License-Identifier: GPL-2.0
/*
* leon_pci_grpci2.c: GRPCI2 Host PCI driver
*
* Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom
*
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/leon.h>
#include <asm/vaddrs.h>
#include <asm/sections.h>
#include <asm/leon_pci.h>
#include "irq.h"
struct grpci2_barcfg {
unsigned long pciadr; /* PCI Space Address */
unsigned long ahbadr; /* PCI Base address mapped to this AHB addr */
};
/* Device Node Configuration options:
* - barcfgs : Custom Configuration of Host's 6 target BARs
* - irq_mask : Limit which PCI interrupts are enabled
* - do_reset : Force PCI Reset on startup
*
* barcfgs
* =======
*
* Optional custom Target BAR configuration (see struct grpci2_barcfg). All
* addresses are physical. Array always contains 6 elements (len=2*4*6 bytes)
*
* -1 means not configured (let host driver do default setup).
*
* [i*2+0] = PCI Address of BAR[i] on target interface
* [i*2+1] = Accessing PCI address of BAR[i] result in this AMBA address
*
*
* irq_mask
* ========
*
* Limit which PCI interrupts are enabled. 0=Disable, 1=Enable. By default
* all are enabled. Use this when PCI interrupt pins are floating on PCB.
* int, len=4.
* bit0 = PCI INTA#
* bit1 = PCI INTB#
* bit2 = PCI INTC#
* bit3 = PCI INTD#
*
*
* reset
* =====
*
* Force PCI reset on startup. int, len=4
*/
/* Enable Debugging Configuration Space Access */
#undef GRPCI2_DEBUG_CFGACCESS
/*
* GRPCI2 APB Register MAP
*/
struct grpci2_regs {
unsigned int ctrl; /* 0x00 Control */
unsigned int sts_cap; /* 0x04 Status / Capabilities */
int res1; /* 0x08 */
unsigned int io_map; /* 0x0C I/O Map address */
unsigned int dma_ctrl; /* 0x10 DMA */
unsigned int dma_bdbase; /* 0x14 DMA */
int res2[2]; /* 0x18 */
unsigned int bars[6]; /* 0x20 read-only PCI BARs */
int res3[2]; /* 0x38 */
unsigned int ahbmst_map[16]; /* 0x40 AHB->PCI Map per AHB Master */
/* PCI Trace Buffer Registers (OPTIONAL) */
unsigned int t_ctrl; /* 0x80 */
unsigned int t_cnt; /* 0x84 */
unsigned int t_adpat; /* 0x88 */
unsigned int t_admask; /* 0x8C */
unsigned int t_sigpat; /* 0x90 */
unsigned int t_sigmask; /* 0x94 */
unsigned int t_adstate; /* 0x98 */
unsigned int t_sigstate; /* 0x9C */
};
#define REGLOAD(a) (be32_to_cpu(__raw_readl(&(a))))
#define REGSTORE(a, v) (__raw_writel(cpu_to_be32(v), &(a)))
#define CTRL_BUS_BIT 16
#define CTRL_RESET (1<<31)
#define CTRL_SI (1<<27)
#define CTRL_PE (1<<26)
#define CTRL_EI (1<<25)
#define CTRL_ER (1<<24)
#define CTRL_BUS (0xff<<CTRL_BUS_BIT)
#define CTRL_HOSTINT 0xf
#define STS_HOST_BIT 31
#define STS_MST_BIT 30
#define STS_TAR_BIT 29
#define STS_DMA_BIT 28
#define STS_DI_BIT 27
#define STS_HI_BIT 26
#define STS_IRQMODE_BIT 24
#define STS_TRACE_BIT 23
#define STS_CFGERRVALID_BIT 20
#define STS_CFGERR_BIT 19
#define STS_INTTYPE_BIT 12
#define STS_INTSTS_BIT 8
#define STS_FDEPTH_BIT 2
#define STS_FNUM_BIT 0
#define STS_HOST (1<<STS_HOST_BIT)
#define STS_MST (1<<STS_MST_BIT)
#define STS_TAR (1<<STS_TAR_BIT)
#define STS_DMA (1<<STS_DMA_BIT)
#define STS_DI (1<<STS_DI_BIT)
#define STS_HI (1<<STS_HI_BIT)
#define STS_IRQMODE (0x3<<STS_IRQMODE_BIT)
#define STS_TRACE (1<<STS_TRACE_BIT)
#define STS_CFGERRVALID (1<<STS_CFGERRVALID_BIT)
#define STS_CFGERR (1<<STS_CFGERR_BIT)
#define STS_INTTYPE (0x3f<<STS_INTTYPE_BIT)
#define STS_INTSTS (0xf<<STS_INTSTS_BIT)
#define STS_FDEPTH (0x7<<STS_FDEPTH_BIT)
#define STS_FNUM (0x3<<STS_FNUM_BIT)
#define STS_ISYSERR (1<<17)
#define STS_IDMA (1<<16)
#define STS_IDMAERR (1<<15)
#define STS_IMSTABRT (1<<14)
#define STS_ITGTABRT (1<<13)
#define STS_IPARERR (1<<12)
#define STS_ERR_IRQ (STS_ISYSERR | STS_IMSTABRT | STS_ITGTABRT | STS_IPARERR)
struct grpci2_bd_chan {
unsigned int ctrl; /* 0x00 DMA Control */
unsigned int nchan; /* 0x04 Next DMA Channel Address */
unsigned int nbd; /* 0x08 Next Data Descriptor in chan */
unsigned int res; /* 0x0C Reserved */
};
#define BD_CHAN_EN 0x80000000
#define BD_CHAN_TYPE 0x00300000
#define BD_CHAN_BDCNT 0x0000ffff
#define BD_CHAN_EN_BIT 31
#define BD_CHAN_TYPE_BIT 20
#define BD_CHAN_BDCNT_BIT 0
struct grpci2_bd_data {
unsigned int ctrl; /* 0x00 DMA Data Control */
unsigned int pci_adr; /* 0x04 PCI Start Address */
unsigned int ahb_adr; /* 0x08 AHB Start address */
unsigned int next; /* 0x0C Next Data Descriptor in chan */
};
#define BD_DATA_EN 0x80000000
#define BD_DATA_IE 0x40000000
#define BD_DATA_DR 0x20000000
#define BD_DATA_TYPE 0x00300000
#define BD_DATA_ER 0x00080000
#define BD_DATA_LEN 0x0000ffff
#define BD_DATA_EN_BIT 31
#define BD_DATA_IE_BIT 30
#define BD_DATA_DR_BIT 29
#define BD_DATA_TYPE_BIT 20
#define BD_DATA_ER_BIT 19
#define BD_DATA_LEN_BIT 0
/* GRPCI2 Capability */
struct grpci2_cap_first {
unsigned int ctrl;
unsigned int pci2ahb_map[6];
unsigned int ext2ahb_map;
unsigned int io_map;
unsigned int pcibar_size[6];
};
#define CAP9_CTRL_OFS 0
#define CAP9_BAR_OFS 0x4
#define CAP9_IOMAP_OFS 0x20
#define CAP9_BARSIZE_OFS 0x24
#define TGT 256
struct grpci2_priv {
struct leon_pci_info info; /* must be on top of this structure */
struct grpci2_regs __iomem *regs;
char irq;
char irq_mode; /* IRQ Mode from CAPSTS REG */
char bt_enabled;
char do_reset;
char irq_mask;
u32 pciid; /* PCI ID of Host */
unsigned char irq_map[4];
/* Virtual IRQ numbers */
unsigned int virq_err;
unsigned int virq_dma;
/* AHB PCI Windows */
unsigned long pci_area; /* MEMORY */
unsigned long pci_area_end;
unsigned long pci_io; /* I/O */
unsigned long pci_conf; /* CONFIGURATION */
unsigned long pci_conf_end;
unsigned long pci_io_va;
struct grpci2_barcfg tgtbars[6];
};
static DEFINE_SPINLOCK(grpci2_dev_lock);
static struct grpci2_priv *grpci2priv;
static int grpci2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
struct grpci2_priv *priv = dev->bus->sysdata;
int irq_group;
/* Use default IRQ decoding on PCI BUS0 according slot numbering */
irq_group = slot & 0x3;
pin = ((pin - 1) + irq_group) & 0x3;
return priv->irq_map[pin];
}
static int grpci2_cfg_r32(struct grpci2_priv *priv, unsigned int bus,
unsigned int devfn, int where, u32 *val)
{
unsigned int *pci_conf;
unsigned long flags;
u32 tmp;
if (where & 0x3)
return -EINVAL;
if (bus == 0) {
devfn += (0x8 * 6); /* start at AD16=Device0 */
} else if (bus == TGT) {
bus = 0;
devfn = 0; /* special case: bridge controller itself */
}
/* Select bus */
spin_lock_irqsave(&grpci2_dev_lock, flags);
REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) |
(bus << 16));
spin_unlock_irqrestore(&grpci2_dev_lock, flags);
/* clear old status */
REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID));
pci_conf = (unsigned int *) (priv->pci_conf |
(devfn << 8) | (where & 0xfc));
tmp = LEON3_BYPASS_LOAD_PA(pci_conf);
/* Wait until GRPCI2 signals that CFG access is done, it should be
* done instantaneously unless a DMA operation is ongoing...
*/
while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0)
;
if (REGLOAD(priv->regs->sts_cap) & STS_CFGERR) {
*val = 0xffffffff;
} else {
/* Bus always little endian (unaffected by byte-swapping) */
*val = swab32(tmp);
}
return 0;
}
static int grpci2_cfg_r16(struct grpci2_priv *priv, unsigned int bus,
unsigned int devfn, int where, u32 *val)
{
u32 v;
int ret;
if (where & 0x1)
return -EINVAL;
ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
*val = 0xffff & (v >> (8 * (where & 0x3)));
return ret;
}
static int grpci2_cfg_r8(struct grpci2_priv *priv, unsigned int bus,
unsigned int devfn, int where, u32 *val)
{
u32 v;
int ret;
ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
*val = 0xff & (v >> (8 * (where & 3)));
return ret;
}
static int grpci2_cfg_w32(struct grpci2_priv *priv, unsigned int bus,
unsigned int devfn, int where, u32 val)
{
unsigned int *pci_conf;
unsigned long flags;
if (where & 0x3)
return -EINVAL;
if (bus == 0) {
devfn += (0x8 * 6); /* start at AD16=Device0 */
} else if (bus == TGT) {
bus = 0;
devfn = 0; /* special case: bridge controller itself */
}
/* Select bus */
spin_lock_irqsave(&grpci2_dev_lock, flags);
REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) |
(bus << 16));
spin_unlock_irqrestore(&grpci2_dev_lock, flags);
/* clear old status */
REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID));
pci_conf = (unsigned int *) (priv->pci_conf |
(devfn << 8) | (where & 0xfc));
LEON3_BYPASS_STORE_PA(pci_conf, swab32(val));
/* Wait until GRPCI2 signals that CFG access is done, it should be
* done instantaneously unless a DMA operation is ongoing...
*/
while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0)
;
return 0;
}
static int grpci2_cfg_w16(struct grpci2_priv *priv, unsigned int bus,
unsigned int devfn, int where, u32 val)
{
int ret;
u32 v;
if (where & 0x1)
return -EINVAL;
ret = grpci2_cfg_r32(priv, bus, devfn, where&~3, &v);
if (ret)
return ret;
v = (v & ~(0xffff << (8 * (where & 0x3)))) |
((0xffff & val) << (8 * (where & 0x3)));
return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v);
}
static int grpci2_cfg_w8(struct grpci2_priv *priv, unsigned int bus,
unsigned int devfn, int where, u32 val)
{
int ret;
u32 v;
ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
if (ret != 0)
return ret;
v = (v & ~(0xff << (8 * (where & 0x3)))) |
((0xff & val) << (8 * (where & 0x3)));
return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v);
}
/* Read from Configuration Space. When entering here the PCI layer has taken
* the pci_lock spinlock and IRQ is off.
*/
static int grpci2_read_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
struct grpci2_priv *priv = grpci2priv;
unsigned int busno = bus->number;
int ret;
if (PCI_SLOT(devfn) > 15 || busno > 255) {
*val = ~0;
return 0;
}
switch (size) {
case 1:
ret = grpci2_cfg_r8(priv, busno, devfn, where, val);
break;
case 2:
ret = grpci2_cfg_r16(priv, busno, devfn, where, val);
break;
case 4:
ret = grpci2_cfg_r32(priv, busno, devfn, where, val);
break;
default:
ret = -EINVAL;
break;
}
#ifdef GRPCI2_DEBUG_CFGACCESS
printk(KERN_INFO "grpci2_read_config: [%02x:%02x:%x] ofs=%d val=%x "
"size=%d\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where,
*val, size);
#endif
return ret;
}
/* Write to Configuration Space. When entering here the PCI layer has taken
* the pci_lock spinlock and IRQ is off.
*/
static int grpci2_write_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
struct grpci2_priv *priv = grpci2priv;
unsigned int busno = bus->number;
if (PCI_SLOT(devfn) > 15 || busno > 255)
return 0;
#ifdef GRPCI2_DEBUG_CFGACCESS
printk(KERN_INFO "grpci2_write_config: [%02x:%02x:%x] ofs=%d size=%d "
"val=%x\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn),
where, size, val);
#endif
switch (size) {
default:
return -EINVAL;
case 1:
return grpci2_cfg_w8(priv, busno, devfn, where, val);
case 2:
return grpci2_cfg_w16(priv, busno, devfn, where, val);
case 4:
return grpci2_cfg_w32(priv, busno, devfn, where, val);
}
}
static struct pci_ops grpci2_ops = {
.read = grpci2_read_config,
.write = grpci2_write_config,
};
/* GENIRQ IRQ chip implementation for GRPCI2 irqmode=0..2. In configuration
* 3 where all PCI Interrupts has a separate IRQ on the system IRQ controller
* this is not needed and the standard IRQ controller can be used.
*/
static void grpci2_mask_irq(struct irq_data *data)
{
unsigned long flags;
unsigned int irqidx;
struct grpci2_priv *priv = grpci2priv;
irqidx = (unsigned int)data->chip_data - 1;
if (irqidx > 3) /* only mask PCI interrupts here */
return;
spin_lock_irqsave(&grpci2_dev_lock, flags);
REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) & ~(1 << irqidx));
spin_unlock_irqrestore(&grpci2_dev_lock, flags);
}
static void grpci2_unmask_irq(struct irq_data *data)
{
unsigned long flags;
unsigned int irqidx;
struct grpci2_priv *priv = grpci2priv;
irqidx = (unsigned int)data->chip_data - 1;
if (irqidx > 3) /* only unmask PCI interrupts here */
return;
spin_lock_irqsave(&grpci2_dev_lock, flags);
REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) | (1 << irqidx));
spin_unlock_irqrestore(&grpci2_dev_lock, flags);
}
static unsigned int grpci2_startup_irq(struct irq_data *data)
{
grpci2_unmask_irq(data);
return 0;
}
static void grpci2_shutdown_irq(struct irq_data *data)
{
grpci2_mask_irq(data);
}
static struct irq_chip grpci2_irq = {
.name = "grpci2",
.irq_startup = grpci2_startup_irq,
.irq_shutdown = grpci2_shutdown_irq,
.irq_mask = grpci2_mask_irq,
.irq_unmask = grpci2_unmask_irq,
};
/* Handle one or multiple IRQs from the PCI core */
static void grpci2_pci_flow_irq(struct irq_desc *desc)
{
struct grpci2_priv *priv = grpci2priv;
int i, ack = 0;
unsigned int ctrl, sts_cap, pci_ints;
ctrl = REGLOAD(priv->regs->ctrl);
sts_cap = REGLOAD(priv->regs->sts_cap);
/* Error Interrupt? */
if (sts_cap & STS_ERR_IRQ) {
generic_handle_irq(priv->virq_err);
ack = 1;
}
/* PCI Interrupt? */
pci_ints = ((~sts_cap) >> STS_INTSTS_BIT) & ctrl & CTRL_HOSTINT;
if (pci_ints) {
/* Call respective PCI Interrupt handler */
for (i = 0; i < 4; i++) {
if (pci_ints & (1 << i))
generic_handle_irq(priv->irq_map[i]);
}
ack = 1;
}
/*
* Decode DMA Interrupt only when shared with Err and PCI INTX#, when
* the DMA is a unique IRQ the DMA interrupts doesn't end up here, they
* goes directly to DMA ISR.
*/
if ((priv->irq_mode == 0) && (sts_cap & (STS_IDMA | STS_IDMAERR))) {
generic_handle_irq(priv->virq_dma);
ack = 1;
}
/*
* Call "first level" IRQ chip end-of-irq handler. It will ACK LEON IRQ
* Controller, this must be done after IRQ sources have been handled to
* avoid double IRQ generation
*/
if (ack)
desc->irq_data.chip->irq_eoi(&desc->irq_data);
}
/* Create a virtual IRQ */
static unsigned int grpci2_build_device_irq(unsigned int irq)
{
unsigned int virq = 0, pil;
pil = 1 << 8;
virq = irq_alloc(irq, pil);
if (virq == 0)
goto out;
irq_set_chip_and_handler_name(virq, &grpci2_irq, handle_simple_irq,
"pcilvl");
irq_set_chip_data(virq, (void *)irq);
out:
return virq;
}
static void grpci2_hw_init(struct grpci2_priv *priv)
{
u32 ahbadr, pciadr, bar_sz, capptr, io_map, data;
struct grpci2_regs __iomem *regs = priv->regs;
int i;
struct grpci2_barcfg *barcfg = priv->tgtbars;
/* Reset any earlier setup */
if (priv->do_reset) {
printk(KERN_INFO "GRPCI2: Resetting PCI bus\n");
REGSTORE(regs->ctrl, CTRL_RESET);
ssleep(1); /* Wait for boards to settle */
}
REGSTORE(regs->ctrl, 0);
REGSTORE(regs->sts_cap, ~0); /* Clear Status */
REGSTORE(regs->dma_ctrl, 0);
REGSTORE(regs->dma_bdbase, 0);
/* Translate I/O accesses to 0, I/O Space always @ PCI low 64Kbytes */
REGSTORE(regs->io_map, REGLOAD(regs->io_map) & 0x0000ffff);
/* set 1:1 mapping between AHB -> PCI memory space, for all Masters
* Each AHB master has its own mapping registers. Max 16 AHB masters.
*/
for (i = 0; i < 16; i++)
REGSTORE(regs->ahbmst_map[i], priv->pci_area);
/* Get the GRPCI2 Host PCI ID */
grpci2_cfg_r32(priv, TGT, 0, PCI_VENDOR_ID, &priv->pciid);
/* Get address to first (always defined) capability structure */
grpci2_cfg_r8(priv, TGT, 0, PCI_CAPABILITY_LIST, &capptr);
/* Enable/Disable Byte twisting */
grpci2_cfg_r32(priv, TGT, 0, capptr+CAP9_IOMAP_OFS, &io_map);
io_map = (io_map & ~0x1) | (priv->bt_enabled ? 1 : 0);
grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_IOMAP_OFS, io_map);
/* Setup the Host's PCI Target BARs for other peripherals to access,
* and do DMA to the host's memory. The target BARs can be sized and
* enabled individually.
*
* User may set custom target BARs, but default is:
* The first BARs is used to map kernel low (DMA is part of normal
* region on sparc which is SRMMU_MAXMEM big) main memory 1:1 to the
* PCI bus, the other BARs are disabled. We assume that the first BAR
* is always available.
*/
for (i = 0; i < 6; i++) {
if (barcfg[i].pciadr != ~0 && barcfg[i].ahbadr != ~0) {
/* Target BARs must have the proper alignment */
ahbadr = barcfg[i].ahbadr;
pciadr = barcfg[i].pciadr;
bar_sz = ((pciadr - 1) & ~pciadr) + 1;
} else {
if (i == 0) {
/* Map main memory */
bar_sz = 0xf0000008; /* 256MB prefetchable */
ahbadr = 0xf0000000 & (u32)__pa(PAGE_ALIGN(
(unsigned long) &_end));
pciadr = ahbadr;
} else {
bar_sz = 0;
ahbadr = 0;
pciadr = 0;
}
}
grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_BARSIZE_OFS+i*4,
bar_sz);
grpci2_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_0+i*4, pciadr);
grpci2_cfg_w32(priv, TGT, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr);
printk(KERN_INFO " TGT BAR[%d]: 0x%08x (PCI)-> 0x%08x\n",
i, pciadr, ahbadr);
}
/* set as bus master and enable pci memory responses */
grpci2_cfg_r32(priv, TGT, 0, PCI_COMMAND, &data);
data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
grpci2_cfg_w32(priv, TGT, 0, PCI_COMMAND, data);
/* Enable Error respone (CPU-TRAP) on illegal memory access. */
REGSTORE(regs->ctrl, CTRL_ER | CTRL_PE);
}
static irqreturn_t grpci2_jump_interrupt(int irq, void *arg)
{
printk(KERN_ERR "GRPCI2: Jump IRQ happened\n");
return IRQ_NONE;
}
/* Handle GRPCI2 Error Interrupt */
static irqreturn_t grpci2_err_interrupt(int irq, void *arg)
{
struct grpci2_priv *priv = arg;
struct grpci2_regs __iomem *regs = priv->regs;
unsigned int status;
status = REGLOAD(regs->sts_cap);
if ((status & STS_ERR_IRQ) == 0)
return IRQ_NONE;
if (status & STS_IPARERR)
printk(KERN_ERR "GRPCI2: Parity Error\n");
if (status & STS_ITGTABRT)
printk(KERN_ERR "GRPCI2: Target Abort\n");
if (status & STS_IMSTABRT)
printk(KERN_ERR "GRPCI2: Master Abort\n");
if (status & STS_ISYSERR)
printk(KERN_ERR "GRPCI2: System Error\n");
/* Clear handled INT TYPE IRQs */
REGSTORE(regs->sts_cap, status & STS_ERR_IRQ);
return IRQ_HANDLED;
}
static int grpci2_of_probe(struct platform_device *ofdev)
{
struct grpci2_regs __iomem *regs;
struct grpci2_priv *priv;
int err, i, len;
const int *tmp;
unsigned int capability;
if (grpci2priv) {
printk(KERN_ERR "GRPCI2: only one GRPCI2 core supported\n");
return -ENODEV;
}
if (ofdev->num_resources < 3) {
printk(KERN_ERR "GRPCI2: not enough APB/AHB resources\n");
return -EIO;
}
/* Find Device Address */
regs = of_ioremap(&ofdev->resource[0], 0,
resource_size(&ofdev->resource[0]),
"grlib-grpci2 regs");
if (regs == NULL) {
printk(KERN_ERR "GRPCI2: ioremap failed\n");
return -EIO;
}
/*
* Check that we're in Host Slot and that we can act as a Host Bridge
* and not only as target.
*/
capability = REGLOAD(regs->sts_cap);
if ((capability & STS_HOST) || !(capability & STS_MST)) {
printk(KERN_INFO "GRPCI2: not in host system slot\n");
err = -EIO;
goto err1;
}
priv = grpci2priv = kzalloc(sizeof(struct grpci2_priv), GFP_KERNEL);
if (grpci2priv == NULL) {
err = -ENOMEM;
goto err1;
}
priv->regs = regs;
priv->irq = ofdev->archdata.irqs[0]; /* BASE IRQ */
priv->irq_mode = (capability & STS_IRQMODE) >> STS_IRQMODE_BIT;
printk(KERN_INFO "GRPCI2: host found at %p, irq%d\n", regs, priv->irq);
/* Byte twisting should be made configurable from kernel command line */
priv->bt_enabled = 1;
/* Let user do custom Target BAR assignment */
tmp = of_get_property(ofdev->dev.of_node, "barcfg", &len);
if (tmp && (len == 2*4*6))
memcpy(priv->tgtbars, tmp, 2*4*6);
else
memset(priv->tgtbars, -1, 2*4*6);
/* Limit IRQ unmasking in irq_mode 2 and 3 */
tmp = of_get_property(ofdev->dev.of_node, "irq_mask", &len);
if (tmp && (len == 4))
priv->do_reset = *tmp;
else
priv->irq_mask = 0xf;
/* Optional PCI reset. Force PCI reset on startup */
tmp = of_get_property(ofdev->dev.of_node, "reset", &len);
if (tmp && (len == 4))
priv->do_reset = *tmp;
else
priv->do_reset = 0;
/* Find PCI Memory, I/O and Configuration Space Windows */
priv->pci_area = ofdev->resource[1].start;
priv->pci_area_end = ofdev->resource[1].end+1;
priv->pci_io = ofdev->resource[2].start;
priv->pci_conf = ofdev->resource[2].start + 0x10000;
priv->pci_conf_end = priv->pci_conf + 0x10000;
priv->pci_io_va = (unsigned long)ioremap(priv->pci_io, 0x10000);
if (!priv->pci_io_va) {
err = -EIO;
goto err2;
}
printk(KERN_INFO
"GRPCI2: MEMORY SPACE [0x%08lx - 0x%08lx]\n"
" I/O SPACE [0x%08lx - 0x%08lx]\n"
" CONFIG SPACE [0x%08lx - 0x%08lx]\n",
priv->pci_area, priv->pci_area_end-1,
priv->pci_io, priv->pci_conf-1,
priv->pci_conf, priv->pci_conf_end-1);
/*
* I/O Space resources in I/O Window mapped into Virtual Adr Space
* We never use low 4KB because some devices seem have problems using
* address 0.
*/
memset(&priv->info.io_space, 0, sizeof(struct resource));
priv->info.io_space.name = "GRPCI2 PCI I/O Space";
priv->info.io_space.start = priv->pci_io_va + 0x1000;
priv->info.io_space.end = priv->pci_io_va + 0x10000 - 1;
priv->info.io_space.flags = IORESOURCE_IO;
/*
* GRPCI2 has no prefetchable memory, map everything as
* non-prefetchable memory
*/
memset(&priv->info.mem_space, 0, sizeof(struct resource));
priv->info.mem_space.name = "GRPCI2 PCI MEM Space";
priv->info.mem_space.start = priv->pci_area;
priv->info.mem_space.end = priv->pci_area_end - 1;
priv->info.mem_space.flags = IORESOURCE_MEM;
if (request_resource(&iomem_resource, &priv->info.mem_space) < 0)
goto err3;
if (request_resource(&ioport_resource, &priv->info.io_space) < 0)
goto err4;
/* setup maximum supported PCI buses */
priv->info.busn.name = "GRPCI2 busn";
priv->info.busn.start = 0;
priv->info.busn.end = 255;
grpci2_hw_init(priv);
/*
* Get PCI Interrupt to System IRQ mapping and setup IRQ handling
* Error IRQ always on PCI INTA.
*/
if (priv->irq_mode < 2) {
/* All PCI interrupts are shared using the same system IRQ */
leon_update_virq_handling(priv->irq, grpci2_pci_flow_irq,
"pcilvl", 0);
priv->irq_map[0] = grpci2_build_device_irq(1);
priv->irq_map[1] = grpci2_build_device_irq(2);
priv->irq_map[2] = grpci2_build_device_irq(3);
priv->irq_map[3] = grpci2_build_device_irq(4);
priv->virq_err = grpci2_build_device_irq(5);
if (priv->irq_mode & 1)
priv->virq_dma = ofdev->archdata.irqs[1];
else
priv->virq_dma = grpci2_build_device_irq(6);
/* Enable IRQs on LEON IRQ controller */
err = request_irq(priv->irq, grpci2_jump_interrupt, 0,
"GRPCI2_JUMP", priv);
if (err)
printk(KERN_ERR "GRPCI2: ERR IRQ request failed\n");
} else {
/* All PCI interrupts have an unique IRQ interrupt */
for (i = 0; i < 4; i++) {
/* Make LEON IRQ layer handle level IRQ by acking */
leon_update_virq_handling(ofdev->archdata.irqs[i],
handle_fasteoi_irq, "pcilvl",
1);
priv->irq_map[i] = ofdev->archdata.irqs[i];
}
priv->virq_err = priv->irq_map[0];
if (priv->irq_mode & 1)
priv->virq_dma = ofdev->archdata.irqs[4];
else
priv->virq_dma = priv->irq_map[0];
/* Unmask all PCI interrupts, request_irq will not do that */
REGSTORE(regs->ctrl, REGLOAD(regs->ctrl)|(priv->irq_mask&0xf));
}
/* Setup IRQ handler for non-configuration space access errors */
err = request_irq(priv->virq_err, grpci2_err_interrupt, IRQF_SHARED,
"GRPCI2_ERR", priv);
if (err) {
printk(KERN_DEBUG "GRPCI2: ERR VIRQ request failed: %d\n", err);
goto err5;
}
/*
* Enable Error Interrupts. PCI interrupts are unmasked once request_irq
* is called by the PCI Device drivers
*/
REGSTORE(regs->ctrl, REGLOAD(regs->ctrl) | CTRL_EI | CTRL_SI);
/* Init common layer and scan buses */
priv->info.ops = &grpci2_ops;
priv->info.map_irq = grpci2_map_irq;
leon_pci_init(ofdev, &priv->info);
return 0;
err5:
release_resource(&priv->info.io_space);
err4:
release_resource(&priv->info.mem_space);
err3:
err = -ENOMEM;
iounmap((void __iomem *)priv->pci_io_va);
err2:
kfree(priv);
err1:
of_iounmap(&ofdev->resource[0], regs,
resource_size(&ofdev->resource[0]));
return err;
}
static const struct of_device_id grpci2_of_match[] = {
{
.name = "GAISLER_GRPCI2",
},
{
.name = "01_07c",
},
{},
};
static struct platform_driver grpci2_of_driver = {
.driver = {
.name = "grpci2",
.of_match_table = grpci2_of_match,
},
.probe = grpci2_of_probe,
};
static int __init grpci2_init(void)
{
return platform_driver_register(&grpci2_of_driver);
}
subsys_initcall(grpci2_init);
Codebase Browser
linux