/*
* arch/xtensa/kernel/coprocessor.S
*
* Xtensa processor configuration-specific table of coprocessor and
* other custom register layout information.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003 - 2007 Tensilica Inc.
*/
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/asmmacro.h>
#include <asm/coprocessor.h>
#include <asm/current.h>
#include <asm/regs.h>
/*
* Rules for coprocessor state manipulation on SMP:
*
* - a task may have live coprocessors only on one CPU.
*
* - whether coprocessor context of task T is live on some CPU is
* denoted by T's thread_info->cpenable.
*
* - non-zero thread_info->cpenable means that thread_info->cp_owner_cpu
* is valid in the T's thread_info. Zero thread_info->cpenable means that
* coprocessor context is valid in the T's thread_info.
*
* - if a coprocessor context of task T is live on CPU X, only CPU X changes
* T's thread_info->cpenable, cp_owner_cpu and coprocessor save area.
* This is done by making sure that for the task T with live coprocessor
* on CPU X cpenable SR is 0 when T runs on any other CPU Y.
* When fast_coprocessor exception is taken on CPU Y it goes to the
* C-level do_coprocessor that uses IPI to make CPU X flush T's coprocessors.
*/
#if XTENSA_HAVE_COPROCESSORS
/*
* Macros for lazy context switch.
*/
#define SAVE_CP_REGS(x) \
.if XTENSA_HAVE_COPROCESSOR(x); \
.align 4; \
.Lsave_cp_regs_cp##x: \
xchal_cp##x##_store a2 a3 a4 a5 a6; \
ret; \
.endif
#define LOAD_CP_REGS(x) \
.if XTENSA_HAVE_COPROCESSOR(x); \
.align 4; \
.Lload_cp_regs_cp##x: \
xchal_cp##x##_load a2 a3 a4 a5 a6; \
ret; \
.endif
#define CP_REGS_TAB(x) \
.if XTENSA_HAVE_COPROCESSOR(x); \
.long .Lsave_cp_regs_cp##x; \
.long .Lload_cp_regs_cp##x; \
.else; \
.long 0, 0; \
.endif; \
.long THREAD_XTREGS_CP##x
#define CP_REGS_TAB_SAVE 0
#define CP_REGS_TAB_LOAD 4
#define CP_REGS_TAB_OFFSET 8
__XTENSA_HANDLER
SAVE_CP_REGS(0)
SAVE_CP_REGS(1)
SAVE_CP_REGS(2)
SAVE_CP_REGS(3)
SAVE_CP_REGS(4)
SAVE_CP_REGS(5)
SAVE_CP_REGS(6)
SAVE_CP_REGS(7)
LOAD_CP_REGS(0)
LOAD_CP_REGS(1)
LOAD_CP_REGS(2)
LOAD_CP_REGS(3)
LOAD_CP_REGS(4)
LOAD_CP_REGS(5)
LOAD_CP_REGS(6)
LOAD_CP_REGS(7)
.align 4
.Lcp_regs_jump_table:
CP_REGS_TAB(0)
CP_REGS_TAB(1)
CP_REGS_TAB(2)
CP_REGS_TAB(3)
CP_REGS_TAB(4)
CP_REGS_TAB(5)
CP_REGS_TAB(6)
CP_REGS_TAB(7)
/*
* Entry condition:
*
* a0: trashed, original value saved on stack (PT_AREG0)
* a1: a1
* a2: new stack pointer, original in DEPC
* a3: a3
* depc: a2, original value saved on stack (PT_DEPC)
* excsave_1: dispatch table
*
* PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
* < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
*/
ENTRY(fast_coprocessor)
s32i a3, a2, PT_AREG3
#ifdef CONFIG_SMP
/*
* Check if any coprocessor context is live on another CPU
* and if so go through the C-level coprocessor exception handler
* to flush it to memory.
*/
GET_THREAD_INFO (a0, a2)
l32i a3, a0, THREAD_CPENABLE
beqz a3, .Lload_local
/*
* Pairs with smp_wmb in local_coprocessor_release_all
* and with both memws below.
*/
memw
l32i a3, a0, THREAD_CPU
l32i a0, a0, THREAD_CP_OWNER_CPU
beq a0, a3, .Lload_local
rsr a0, ps
l32i a3, a2, PT_AREG3
bbci.l a0, PS_UM_BIT, 1f
call0 user_exception
1: call0 kernel_exception
#endif
/* Save remaining registers a1-a3 and SAR */
.Lload_local:
rsr a3, sar
s32i a1, a2, PT_AREG1
s32i a3, a2, PT_SAR
mov a1, a2
rsr a2, depc
s32i a2, a1, PT_AREG2
/* The hal macros require up to 4 temporary registers. We use a3..a6. */
s32i a4, a1, PT_AREG4
s32i a5, a1, PT_AREG5
s32i a6, a1, PT_AREG6
s32i a7, a1, PT_AREG7
s32i a8, a1, PT_AREG8
s32i a9, a1, PT_AREG9
s32i a10, a1, PT_AREG10
/* Find coprocessor number. Subtract first CP EXCCAUSE from EXCCAUSE */
rsr a3, exccause
addi a3, a3, -EXCCAUSE_COPROCESSOR0_DISABLED
/* Set corresponding CPENABLE bit -> (sar:cp-index, a3: 1<<cp-index)*/
ssl a3 # SAR: 32 - coprocessor_number
movi a2, 1
rsr a0, cpenable
sll a2, a2
or a0, a0, a2
wsr a0, cpenable
rsync
/* Get coprocessor save/load table entry (a7). */
movi a7, .Lcp_regs_jump_table
addx8 a7, a3, a7
addx4 a7, a3, a7
/* Retrieve previous owner (a8). */
rsr a0, excsave1 # exc_table
addx4 a0, a3, a0 # entry for CP
l32i a8, a0, EXC_TABLE_COPROCESSOR_OWNER
/* Set new owner (a9). */
GET_THREAD_INFO (a9, a1)
l32i a4, a9, THREAD_CPU
s32i a9, a0, EXC_TABLE_COPROCESSOR_OWNER
s32i a4, a9, THREAD_CP_OWNER_CPU
/*
* Enable coprocessor for the new owner. (a2 = 1 << CP number)
* This can be done before loading context into the coprocessor.
*/
l32i a4, a9, THREAD_CPENABLE
or a4, a4, a2
/*
* Make sure THREAD_CP_OWNER_CPU is in memory before updating
* THREAD_CPENABLE
*/
memw # (2)
s32i a4, a9, THREAD_CPENABLE
beqz a8, 1f # skip 'save' if no previous owner
/* Disable coprocessor for previous owner. (a2 = 1 << CP number) */
l32i a10, a8, THREAD_CPENABLE
xor a10, a10, a2
/* Get context save area and call save routine. */
l32i a2, a7, CP_REGS_TAB_OFFSET
l32i a3, a7, CP_REGS_TAB_SAVE
add a2, a2, a8
callx0 a3
/*
* Make sure coprocessor context and THREAD_CP_OWNER_CPU are in memory
* before updating THREAD_CPENABLE
*/
memw # (3)
s32i a10, a8, THREAD_CPENABLE
1:
/* Get context save area and call load routine. */
l32i a2, a7, CP_REGS_TAB_OFFSET
l32i a3, a7, CP_REGS_TAB_LOAD
add a2, a2, a9
callx0 a3
/* Restore all registers and return from exception handler. */
l32i a10, a1, PT_AREG10
l32i a9, a1, PT_AREG9
l32i a8, a1, PT_AREG8
l32i a7, a1, PT_AREG7
l32i a6, a1, PT_AREG6
l32i a5, a1, PT_AREG5
l32i a4, a1, PT_AREG4
l32i a0, a1, PT_SAR
l32i a3, a1, PT_AREG3
l32i a2, a1, PT_AREG2
wsr a0, sar
l32i a0, a1, PT_AREG0
l32i a1, a1, PT_AREG1
rfe
ENDPROC(fast_coprocessor)
.text
/*
* coprocessor_flush(struct thread_info*, index)
* a2 a3
*
* Save coprocessor registers for coprocessor 'index'.
* The register values are saved to or loaded from the coprocessor area
* inside the task_info structure.
*
* Note that this function doesn't update the coprocessor_owner information!
*
*/
ENTRY(coprocessor_flush)
abi_entry_default
movi a4, .Lcp_regs_jump_table
addx8 a4, a3, a4
addx4 a3, a3, a4
l32i a4, a3, CP_REGS_TAB_SAVE
beqz a4, 1f
l32i a3, a3, CP_REGS_TAB_OFFSET
add a2, a2, a3
mov a7, a0
callx0 a4
mov a0, a7
1:
abi_ret_default
ENDPROC(coprocessor_flush)
#endif /* XTENSA_HAVE_COPROCESSORS */
Codebase Browser
linux