/* SPDX-License-Identifier: GPL-2.0 */
#include <linux/export.h>
#include <linux/linkage.h>
#include <asm/processor.h>
#include <asm/ppc_asm.h>
#include <asm/reg.h>
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/asm-compat.h>
/*
* Load state from memory into VMX registers including VSCR.
* Assumes the caller has enabled VMX in the MSR.
*/
_GLOBAL(load_vr_state)
li r4,VRSTATE_VSCR
lvx v0,r4,r3
mtvscr v0
REST_32VRS(0,r4,r3)
blr
EXPORT_SYMBOL(load_vr_state)
_ASM_NOKPROBE_SYMBOL(load_vr_state); /* used by restore_math */
/*
* Store VMX state into memory, including VSCR.
* Assumes the caller has enabled VMX in the MSR.
*/
_GLOBAL(store_vr_state)
SAVE_32VRS(0, r4, r3)
mfvscr v0
li r4, VRSTATE_VSCR
stvx v0, r4, r3
lvx v0, 0, r3
blr
EXPORT_SYMBOL(store_vr_state)
/*
* Disable VMX for the task which had it previously,
* and save its vector registers in its thread_struct.
* Enables the VMX for use in the kernel on return.
* On SMP we know the VMX is free, since we give it up every
* switch (ie, no lazy save of the vector registers).
*
* Note that on 32-bit this can only use registers that will be
* restored by fast_exception_return, i.e. r3 - r6, r10 and r11.
*/
_GLOBAL(load_up_altivec)
mfmsr r5 /* grab the current MSR */
#ifdef CONFIG_PPC_BOOK3S_64
/* interrupt doesn't set MSR[RI] and HPT can fault on current access */
ori r5,r5,MSR_RI
#endif
oris r5,r5,MSR_VEC@h
MTMSRD(r5) /* enable use of AltiVec now */
isync
/*
* While userspace in general ignores VRSAVE, glibc uses it as a boolean
* to optimise userspace context save/restore. Whenever we take an
* altivec unavailable exception we must set VRSAVE to something non
* zero. Set it to all 1s. See also the programming note in the ISA.
*/
mfspr r4,SPRN_VRSAVE
cmpwi 0,r4,0
bne+ 1f
li r4,-1
mtspr SPRN_VRSAVE,r4
1:
/* enable use of VMX after return */
#ifdef CONFIG_PPC32
addi r5,r2,THREAD
oris r9,r9,MSR_VEC@h
#else
ld r4,PACACURRENT(r13)
addi r5,r4,THREAD /* Get THREAD */
oris r12,r12,MSR_VEC@h
std r12,_MSR(r1)
#ifdef CONFIG_PPC_BOOK3S_64
li r4,0
stb r4,PACASRR_VALID(r13)
#endif
#endif
li r4,1
stb r4,THREAD_LOAD_VEC(r5)
addi r6,r5,THREAD_VRSTATE
li r10,VRSTATE_VSCR
stw r4,THREAD_USED_VR(r5)
lvx v0,r10,r6
mtvscr v0
REST_32VRS(0,r4,r6)
/* restore registers and return */
blr
_ASM_NOKPROBE_SYMBOL(load_up_altivec)
/*
* save_altivec(tsk)
* Save the vector registers to its thread_struct
*/
_GLOBAL(save_altivec)
addi r3,r3,THREAD /* want THREAD of task */
PPC_LL r7,THREAD_VRSAVEAREA(r3)
PPC_LL r5,PT_REGS(r3)
PPC_LCMPI 0,r7,0
bne 2f
addi r7,r3,THREAD_VRSTATE
2: SAVE_32VRS(0,r4,r7)
mfvscr v0
li r4,VRSTATE_VSCR
stvx v0,r4,r7
lvx v0,0,r7
blr
#ifdef CONFIG_VSX
#ifdef CONFIG_PPC32
#error This asm code isn't ready for 32-bit kernels
#endif
/*
* load_up_vsx(unused, unused, tsk)
* Disable VSX for the task which had it previously,
* and save its vector registers in its thread_struct.
* Reuse the fp and vsx saves, but first check to see if they have
* been saved already.
*/
_GLOBAL(load_up_vsx)
/* Load FP and VSX registers if they haven't been done yet */
andi. r5,r12,MSR_FP
beql+ load_up_fpu /* skip if already loaded */
andis. r5,r12,MSR_VEC@h
beql+ load_up_altivec /* skip if already loaded */
#ifdef CONFIG_PPC_BOOK3S_64
/* interrupt doesn't set MSR[RI] and HPT can fault on current access */
li r5,MSR_RI
mtmsrd r5,1
#endif
ld r4,PACACURRENT(r13)
addi r4,r4,THREAD /* Get THREAD */
li r6,1
stw r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */
/* enable use of VSX after return */
oris r12,r12,MSR_VSX@h
std r12,_MSR(r1)
li r4,0
stb r4,PACASRR_VALID(r13)
b fast_interrupt_return_srr
#endif /* CONFIG_VSX */
/*
* The routines below are in assembler so we can closely control the
* usage of floating-point registers. These routines must be called
* with preempt disabled.
*/
.data
#ifdef CONFIG_PPC32
fpzero:
.long 0
fpone:
.long 0x3f800000 /* 1.0 in single-precision FP */
fphalf:
.long 0x3f000000 /* 0.5 in single-precision FP */
#define LDCONST(fr, name) \
lis r11,name@ha; \
lfs fr,name@l(r11)
#else
fpzero:
.quad 0
fpone:
.quad 0x3ff0000000000000 /* 1.0 */
fphalf:
.quad 0x3fe0000000000000 /* 0.5 */
#ifdef CONFIG_PPC_KERNEL_PCREL
#define LDCONST(fr, name) \
pla r11,name@pcrel; \
lfd fr,0(r11)
#else
#define LDCONST(fr, name) \
addis r11,r2,name@toc@ha; \
lfd fr,name@toc@l(r11)
#endif
#endif
.text
/*
* Internal routine to enable floating point and set FPSCR to 0.
* Don't call it from C; it doesn't use the normal calling convention.
*/
SYM_FUNC_START_LOCAL(fpenable)
#ifdef CONFIG_PPC32
stwu r1,-64(r1)
#else
stdu r1,-64(r1)
#endif
mfmsr r10
ori r11,r10,MSR_FP
mtmsr r11
isync
stfd fr0,24(r1)
stfd fr1,16(r1)
stfd fr31,8(r1)
LDCONST(fr1, fpzero)
mffs fr31
MTFSF_L(fr1)
blr
SYM_FUNC_END(fpenable)
fpdisable:
mtlr r12
MTFSF_L(fr31)
lfd fr31,8(r1)
lfd fr1,16(r1)
lfd fr0,24(r1)
mtmsr r10
isync
addi r1,r1,64
blr
/*
* Vector add, floating point.
*/
_GLOBAL(vaddfp)
mflr r12
bl fpenable
li r0,4
mtctr r0
li r6,0
1: lfsx fr0,r4,r6
lfsx fr1,r5,r6
fadds fr0,fr0,fr1
stfsx fr0,r3,r6
addi r6,r6,4
bdnz 1b
b fpdisable
/*
* Vector subtract, floating point.
*/
_GLOBAL(vsubfp)
mflr r12
bl fpenable
li r0,4
mtctr r0
li r6,0
1: lfsx fr0,r4,r6
lfsx fr1,r5,r6
fsubs fr0,fr0,fr1
stfsx fr0,r3,r6
addi r6,r6,4
bdnz 1b
b fpdisable
/*
* Vector multiply and add, floating point.
*/
_GLOBAL(vmaddfp)
mflr r12
bl fpenable
stfd fr2,32(r1)
li r0,4
mtctr r0
li r7,0
1: lfsx fr0,r4,r7
lfsx fr1,r5,r7
lfsx fr2,r6,r7
fmadds fr0,fr0,fr2,fr1
stfsx fr0,r3,r7
addi r7,r7,4
bdnz 1b
lfd fr2,32(r1)
b fpdisable
/*
* Vector negative multiply and subtract, floating point.
*/
_GLOBAL(vnmsubfp)
mflr r12
bl fpenable
stfd fr2,32(r1)
li r0,4
mtctr r0
li r7,0
1: lfsx fr0,r4,r7
lfsx fr1,r5,r7
lfsx fr2,r6,r7
fnmsubs fr0,fr0,fr2,fr1
stfsx fr0,r3,r7
addi r7,r7,4
bdnz 1b
lfd fr2,32(r1)
b fpdisable
/*
* Vector reciprocal estimate. We just compute 1.0/x.
* r3 -> destination, r4 -> source.
*/
_GLOBAL(vrefp)
mflr r12
bl fpenable
li r0,4
LDCONST(fr1, fpone)
mtctr r0
li r6,0
1: lfsx fr0,r4,r6
fdivs fr0,fr1,fr0
stfsx fr0,r3,r6
addi r6,r6,4
bdnz 1b
b fpdisable
/*
* Vector reciprocal square-root estimate, floating point.
* We use the frsqrte instruction for the initial estimate followed
* by 2 iterations of Newton-Raphson to get sufficient accuracy.
* r3 -> destination, r4 -> source.
*/
_GLOBAL(vrsqrtefp)
mflr r12
bl fpenable
stfd fr2,32(r1)
stfd fr3,40(r1)
stfd fr4,48(r1)
stfd fr5,56(r1)
li r0,4
LDCONST(fr4, fpone)
LDCONST(fr5, fphalf)
mtctr r0
li r6,0
1: lfsx fr0,r4,r6
frsqrte fr1,fr0 /* r = frsqrte(s) */
fmuls fr3,fr1,fr0 /* r * s */
fmuls fr2,fr1,fr5 /* r * 0.5 */
fnmsubs fr3,fr1,fr3,fr4 /* 1 - s * r * r */
fmadds fr1,fr2,fr3,fr1 /* r = r + 0.5 * r * (1 - s * r * r) */
fmuls fr3,fr1,fr0 /* r * s */
fmuls fr2,fr1,fr5 /* r * 0.5 */
fnmsubs fr3,fr1,fr3,fr4 /* 1 - s * r * r */
fmadds fr1,fr2,fr3,fr1 /* r = r + 0.5 * r * (1 - s * r * r) */
stfsx fr1,r3,r6
addi r6,r6,4
bdnz 1b
lfd fr5,56(r1)
lfd fr4,48(r1)
lfd fr3,40(r1)
lfd fr2,32(r1)
b fpdisable
Codebase Browser
linux