# SPDX-License-Identifier: GPL-2.0
config CPM1
bool
select CPM
choice
prompt "8xx Machine Type"
depends on PPC_8xx
default MPC885ADS
config MPC8XXFADS
bool "FADS"
config MPC86XADS
bool "MPC86XADS"
select CPM1
help
MPC86x Application Development System by Freescale Semiconductor.
The MPC86xADS is meant to serve as a platform for s/w and h/w
development around the MPC86X processor families.
config MPC885ADS
bool "MPC885ADS"
select CPM1
select OF_DYNAMIC
help
Freescale Semiconductor MPC885 Application Development System (ADS).
Also known as DUET.
The MPC885ADS is meant to serve as a platform for s/w and h/w
development around the MPC885 processor family.
config PPC_EP88XC
bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)"
select CPM1
help
This enables support for the Embedded Planet EP88xC board.
This board is also resold by Freescale as the QUICCStart
MPC885 Evaluation System and/or the CWH-PPC-885XN-VE.
config PPC_ADDER875
bool "Analogue & Micro Adder 875"
select CPM1
help
This enables support for the Analogue & Micro Adder 875
board.
config TQM8XX
bool "TQM8XX"
select CPM1
help
support for the mpc8xx based boards from TQM.
endchoice
menu "Freescale Ethernet driver platform-specific options"
depends on (FS_ENET && MPC885ADS)
config MPC8xx_SECOND_ETH
bool "Second Ethernet channel"
depends on MPC885ADS
default y
help
This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
The latter will use SCC1, for 885ADS you can select it below.
choice
prompt "Second Ethernet channel"
depends on MPC8xx_SECOND_ETH
default MPC8xx_SECOND_ETH_FEC2
config MPC8xx_SECOND_ETH_FEC2
bool "FEC2"
depends on MPC885ADS
help
Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
(often 2-nd UART) will not work if this is enabled.
config MPC8xx_SECOND_ETH_SCC3
bool "SCC3"
depends on MPC885ADS
help
Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
(often 1-nd UART) will not work if this is enabled.
endchoice
endmenu
#
# MPC8xx Communication options
#
menu "MPC8xx CPM Options"
depends on PPC_8xx
# This doesn't really belong here, but it is convenient to ask
# 8xx specific questions.
comment "Generic MPC8xx Options"
config 8xx_GPIO
bool "GPIO API Support"
select GPIOLIB
select OF_GPIO_MM_GPIOCHIP
help
Saying Y here will cause the ports on an MPC8xx processor to be used
with the GPIO API. If you say N here, the kernel needs less memory.
If in doubt, say Y here.
config 8xx_CPU15
bool "CPU15 Silicon Errata"
depends on !HUGETLB_PAGE
default y
help
This enables a workaround for erratum CPU15 on MPC8xx chips.
This bug can cause incorrect code execution under certain
circumstances. This workaround adds some overhead (a TLB miss
every time execution crosses a page boundary), and you may wish
to disable it if you have worked around the bug in the compiler
(by not placing conditional branches or branches to LR or CTR
in the last word of a page, with a target of the last cache
line in the next page), or if you have used some other
workaround.
If in doubt, say Y here.
choice
prompt "Microcode patch selection"
default NO_UCODE_PATCH
help
Help not implemented yet, coming soon.
config NO_UCODE_PATCH
bool "None"
config USB_SOF_UCODE_PATCH
bool "USB SOF patch"
help
Help not implemented yet, coming soon.
config I2C_SPI_UCODE_PATCH
bool "I2C/SPI relocation patch"
help
Help not implemented yet, coming soon.
config I2C_SPI_SMC1_UCODE_PATCH
bool "I2C/SPI/SMC1 relocation patch"
help
Help not implemented yet, coming soon.
config SMC_UCODE_PATCH
bool "SMC relocation patch"
help
This microcode relocates SMC1 and SMC2 parameter RAMs at
offset 0x1ec0 and 0x1fc0 to allow extended parameter RAM
for SCC3 and SCC4.
endchoice
config UCODE_PATCH
bool
default y
depends on !NO_UCODE_PATCH
menu "8xx advanced setup"
depends on PPC_8xx
config PIN_TLB
bool "Pinned Kernel TLBs"
depends on ADVANCED_OPTIONS
help
On the 8xx, we have 32 instruction TLBs and 32 data TLBs. In each
table 4 TLBs can be pinned.
It reduces the amount of usable TLBs to 28 (ie by 12%). That's the
reason why we make it selectable.
This option does nothing, it just activate the selection of what
to pin.
config PIN_TLB_DATA
bool "Pinned TLB for DATA"
depends on PIN_TLB
default y
help
This pins the first 32 Mbytes of memory with 8M pages.
config PIN_TLB_IMMR
bool "Pinned TLB for IMMR"
depends on PIN_TLB
default y
help
This pins the IMMR area with a 512kbytes page. In case
CONFIG_PIN_TLB_DATA is also selected, it will reduce
CONFIG_PIN_TLB_DATA to 24 Mbytes.
endmenu
endmenu
Codebase Browser
linux