// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/alpha/kernel/sys_nautilus.c
*
* Copyright (C) 1995 David A Rusling
* Copyright (C) 1998 Richard Henderson
* Copyright (C) 1999 Alpha Processor, Inc.,
* (David Daniel, Stig Telfer, Soohoon Lee)
*
* Code supporting NAUTILUS systems.
*
*
* NAUTILUS has the following I/O features:
*
* a) Driven by AMD 751 aka IRONGATE (northbridge):
* 4 PCI slots
* 1 AGP slot
*
* b) Driven by ALI M1543C (southbridge)
* 2 ISA slots
* 2 IDE connectors
* 1 dual drive capable FDD controller
* 2 serial ports
* 1 ECP/EPP/SP parallel port
* 2 USB ports
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/reboot.h>
#include <linux/memblock.h>
#include <linux/bitops.h>
#include <asm/ptrace.h>
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
#include <asm/core_irongate.h>
#include <asm/hwrpb.h>
#include <asm/tlbflush.h>
#include "proto.h"
#include "err_impl.h"
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"
static void __init
nautilus_init_irq(void)
{
if (alpha_using_srm) {
alpha_mv.device_interrupt = srm_device_interrupt;
}
init_i8259a_irqs();
common_init_isa_dma();
}
static int
nautilus_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
/* Preserve the IRQ set up by the console. */
u8 irq;
/* UP1500: AGP INTA is actually routed to IRQ 5, not IRQ 10 as
console reports. Check the device id of AGP bridge to distinguish
UP1500 from UP1000/1100. Note: 'pin' is 2 due to bridge swizzle. */
if (slot == 1 && pin == 2 &&
dev->bus->self && dev->bus->self->device == 0x700f)
return 5;
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
return irq;
}
static void
nautilus_kill_arch(int mode)
{
struct pci_bus *bus = pci_isa_hose->bus;
u32 pmuport;
int off;
switch (mode) {
case LINUX_REBOOT_CMD_RESTART:
if (! alpha_using_srm) {
u8 t8;
pci_bus_read_config_byte(bus, 0x38, 0x43, &t8);
pci_bus_write_config_byte(bus, 0x38, 0x43, t8 | 0x80);
outb(1, 0x92);
outb(0, 0x92);
/* NOTREACHED */
}
break;
case LINUX_REBOOT_CMD_POWER_OFF:
/* Assume M1543C */
off = 0x2000; /* SLP_TYPE = 0, SLP_EN = 1 */
pci_bus_read_config_dword(bus, 0x88, 0x10, &pmuport);
if (!pmuport) {
/* M1535D/D+ */
off = 0x3400; /* SLP_TYPE = 5, SLP_EN = 1 */
pci_bus_read_config_dword(bus, 0x88, 0xe0, &pmuport);
}
pmuport &= 0xfffe;
outw(0xffff, pmuport); /* Clear pending events. */
outw(off, pmuport + 4);
/* NOTREACHED */
break;
}
}
/* Perform analysis of a machine check that arrived from the system (NMI) */
static void
naut_sys_machine_check(unsigned long vector, unsigned long la_ptr,
struct pt_regs *regs)
{
printk("PC %lx RA %lx\n", regs->pc, regs->r26);
irongate_pci_clr_err();
}
/* Machine checks can come from two sources - those on the CPU and those
in the system. They are analysed separately but all starts here. */
static void
nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
{
char *mchk_class;
/* Now for some analysis. Machine checks fall into two classes --
those picked up by the system, and those picked up by the CPU.
Add to that the two levels of severity - correctable or not. */
if (vector == SCB_Q_SYSMCHK
&& ((IRONGATE0->dramms & 0x300) == 0x300)) {
unsigned long nmi_ctl;
/* Clear ALI NMI */
nmi_ctl = inb(0x61);
nmi_ctl |= 0x0c;
outb(nmi_ctl, 0x61);
nmi_ctl &= ~0x0c;
outb(nmi_ctl, 0x61);
/* Write again clears error bits. */
IRONGATE0->stat_cmd = IRONGATE0->stat_cmd & ~0x100;
mb();
IRONGATE0->stat_cmd;
/* Write again clears error bits. */
IRONGATE0->dramms = IRONGATE0->dramms;
mb();
IRONGATE0->dramms;
draina();
wrmces(0x7);
mb();
return;
}
if (vector == SCB_Q_SYSERR)
mchk_class = "Correctable";
else if (vector == SCB_Q_SYSMCHK)
mchk_class = "Fatal";
else {
ev6_machine_check(vector, la_ptr);
return;
}
printk(KERN_CRIT "NAUTILUS Machine check 0x%lx "
"[%s System Machine Check (NMI)]\n",
vector, mchk_class);
naut_sys_machine_check(vector, la_ptr, get_irq_regs());
/* Tell the PALcode to clear the machine check */
draina();
wrmces(0x7);
mb();
}
static struct resource irongate_mem = {
.name = "Irongate PCI MEM",
.flags = IORESOURCE_MEM,
};
static struct resource busn_resource = {
.name = "PCI busn",
.start = 0,
.end = 255,
.flags = IORESOURCE_BUS,
};
static void __init
nautilus_init_pci(void)
{
struct pci_controller *hose = hose_head;
struct pci_host_bridge *bridge;
struct pci_bus *bus;
unsigned long bus_align, bus_size, pci_mem;
unsigned long memtop = max_low_pfn << PAGE_SHIFT;
bridge = pci_alloc_host_bridge(0);
if (!bridge)
return;
/* Use default IO. */
pci_add_resource(&bridge->windows, &ioport_resource);
/* Irongate PCI memory aperture, calculate required size before
setting it up. */
pci_add_resource(&bridge->windows, &irongate_mem);
pci_add_resource(&bridge->windows, &busn_resource);
bridge->dev.parent = NULL;
bridge->sysdata = hose;
bridge->busnr = 0;
bridge->ops = alpha_mv.pci_ops;
bridge->swizzle_irq = alpha_mv.pci_swizzle;
bridge->map_irq = alpha_mv.pci_map_irq;
bridge->size_windows = 1;
/* Scan our single hose. */
if (pci_scan_root_bus_bridge(bridge)) {
pci_free_host_bridge(bridge);
return;
}
bus = hose->bus = bridge->bus;
pcibios_claim_one_bus(bus);
pci_bus_size_bridges(bus);
/* Now we've got the size and alignment of PCI memory resources
stored in irongate_mem. Set up the PCI memory range: limit is
hardwired to 0xffffffff, base must be aligned to 16Mb. */
bus_align = irongate_mem.start;
bus_size = irongate_mem.end + 1 - bus_align;
if (bus_align < 0x1000000UL)
bus_align = 0x1000000UL;
pci_mem = (0x100000000UL - bus_size) & -bus_align;
irongate_mem.start = pci_mem;
irongate_mem.end = 0xffffffffUL;
/* Register our newly calculated PCI memory window in the resource
tree. */
if (request_resource(&iomem_resource, &irongate_mem) < 0)
printk(KERN_ERR "Failed to request MEM on hose 0\n");
printk(KERN_INFO "Irongate pci_mem %pR\n", &irongate_mem);
if (pci_mem < memtop)
memtop = pci_mem;
if (memtop > alpha_mv.min_mem_address) {
free_reserved_area(__va(alpha_mv.min_mem_address),
__va(memtop), -1, NULL);
printk(KERN_INFO "nautilus_init_pci: %ldk freed\n",
(memtop - alpha_mv.min_mem_address) >> 10);
}
if ((IRONGATE0->dev_vendor >> 16) > 0x7006) /* Albacore? */
IRONGATE0->pci_mem = pci_mem;
pci_bus_assign_resources(bus);
pci_bus_add_devices(bus);
}
/*
* The System Vectors
*/
struct alpha_machine_vector nautilus_mv __initmv = {
.vector_name = "Nautilus",
DO_EV6_MMU,
DO_DEFAULT_RTC,
DO_IRONGATE_IO,
.machine_check = nautilus_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
.min_io_address = DEFAULT_IO_BASE,
.min_mem_address = IRONGATE_DEFAULT_MEM_BASE,
.nr_irqs = 16,
.device_interrupt = isa_device_interrupt,
.init_arch = irongate_init_arch,
.init_irq = nautilus_init_irq,
.init_rtc = common_init_rtc,
.init_pci = nautilus_init_pci,
.kill_arch = nautilus_kill_arch,
.pci_map_irq = nautilus_map_irq,
.pci_swizzle = common_swizzle,
};
ALIAS_MV(nautilus)
Codebase Browser
linux