# SPDX-License-Identifier: GPL-2.0-only
#
# Coresight configuration
#
menuconfig CORESIGHT
tristate "CoreSight Tracing Support"
depends on ARM || ARM64
depends on OF || ACPI
select ARM_AMBA
select PERF_EVENTS
select CONFIGFS_FS
help
This framework provides a kernel interface for the CoreSight debug
and trace drivers to register themselves with. It's intended to build
a topological view of the CoreSight components based on a DT
specification and configure the right series of components when a
trace source gets enabled.
To compile this driver as a module, choose M here: the
module will be called coresight.
if CORESIGHT
config CORESIGHT_LINKS_AND_SINKS
tristate "CoreSight Link and Sink drivers"
help
This enables support for CoreSight link and sink drivers that are
responsible for transporting and collecting the trace data
respectively. Link and sinks are dynamically aggregated with a trace
entity at run time to form a complete trace path.
To compile these drivers as modules, choose M here: the
modules will be called coresight-funnel and coresight-replicator.
config CORESIGHT_LINK_AND_SINK_TMC
tristate "Coresight generic TMC driver"
depends on CORESIGHT_LINKS_AND_SINKS
help
This enables support for the Trace Memory Controller driver.
Depending on its configuration the device can act as a link (embedded
trace router - ETR) or sink (embedded trace FIFO). The driver
complies with the generic implementation of the component without
special enhancement or added features.
To compile this driver as a module, choose M here: the
module will be called coresight-tmc.
config CORESIGHT_CATU
tristate "Coresight Address Translation Unit (CATU) driver"
depends on CORESIGHT_LINK_AND_SINK_TMC
help
Enable support for the Coresight Address Translation Unit (CATU).
CATU supports a scatter gather table of 4K pages, with forward/backward
lookup. CATU helps TMC ETR to use a large physically non-contiguous trace
buffer by translating the addresses used by ETR to the physical address
by looking up the provided table. CATU can also be used in pass-through
mode where the address is not translated.
To compile this driver as a module, choose M here: the
module will be called coresight-catu.
config CORESIGHT_SINK_TPIU
tristate "Coresight generic TPIU driver"
depends on CORESIGHT_LINKS_AND_SINKS
help
This enables support for the Trace Port Interface Unit driver,
responsible for bridging the gap between the on-chip coresight
components and a trace for bridging the gap between the on-chip
coresight components and a trace port collection engine, typically
connected to an external host for use case capturing more traces than
the on-board coresight memory can handle.
To compile this driver as a module, choose M here: the
module will be called coresight-tpiu.
config CORESIGHT_SINK_ETBV10
tristate "Coresight ETBv1.0 driver"
depends on CORESIGHT_LINKS_AND_SINKS
help
This enables support for the Embedded Trace Buffer version 1.0 driver
that complies with the generic implementation of the component without
special enhancement or added features.
To compile this driver as a module, choose M here: the
module will be called coresight-etb10.
config CORESIGHT_SOURCE_ETM3X
tristate "CoreSight Embedded Trace Macrocell 3.x driver"
depends on !ARM64
select CORESIGHT_LINKS_AND_SINKS
help
This driver provides support for processor ETM3.x and PTM1.x modules,
which allows tracing the instructions that a processor is executing
This is primarily useful for instruction level tracing. Depending
the ETM version data tracing may also be available.
To compile this driver as a module, choose M here: the
module will be called coresight-etm3x.
config CORESIGHT_SOURCE_ETM4X
tristate "CoreSight ETMv4.x / ETE driver"
depends on ARM64
select CORESIGHT_LINKS_AND_SINKS
select PID_IN_CONTEXTIDR
help
This driver provides support for the CoreSight Embedded Trace Macrocell
version 4.x and the Embedded Trace Extensions (ETE). Both are CPU tracer
modules, tracing the instructions that a processor is executing. This is
primarily useful for instruction level tracing.
To compile this driver as a module, choose M here: the
module will be called coresight-etm4x.
config ETM4X_IMPDEF_FEATURE
bool "Control implementation defined overflow support in ETM 4.x driver"
depends on CORESIGHT_SOURCE_ETM4X
help
This control provides implementation define control for CoreSight
ETM 4.x tracer module that can't reduce commit rate automatically.
This avoids overflow between the ETM tracer module and the cpu core.
config CORESIGHT_STM
tristate "CoreSight System Trace Macrocell driver"
depends on (ARM && !(CPU_32v3 || CPU_32v4 || CPU_32v4T)) || ARM64
select CORESIGHT_LINKS_AND_SINKS
select STM
help
This driver provides support for hardware assisted software
instrumentation based tracing. This is primarily used for
logging useful software events or data coming from various entities
in the system, possibly running different OSs
To compile this driver as a module, choose M here: the
module will be called coresight-stm.
config CORESIGHT_CPU_DEBUG
tristate "CoreSight CPU Debug driver"
depends on ARM || ARM64
depends on DEBUG_FS
help
This driver provides support for coresight debugging module. This
is primarily used to dump sample-based profiling registers when
system triggers panic, the driver will parse context registers so
can quickly get to know program counter (PC), secure state,
exception level, etc. Before use debugging functionality, platform
needs to ensure the clock domain and power domain are enabled
properly, please refer Documentation/trace/coresight/coresight-cpu-debug.rst
for detailed description and the example for usage.
To compile this driver as a module, choose M here: the
module will be called coresight-cpu-debug.
config CORESIGHT_CPU_DEBUG_DEFAULT_ON
bool "Enable CoreSight CPU Debug by default"
depends on CORESIGHT_CPU_DEBUG
help
Say Y here to enable the CoreSight Debug panic-debug by default. This
can also be enabled via debugfs, but this ensures the debug feature
is enabled as early as possible.
Has the same effect as setting coresight_cpu_debug.enable=1 on the
kernel command line.
Say N if unsure.
config CORESIGHT_CTI
tristate "CoreSight Cross Trigger Interface (CTI) driver"
depends on ARM || ARM64
help
This driver provides support for CoreSight CTI and CTM components.
These provide hardware triggering events between CoreSight trace
source and sink components. These can be used to halt trace or
inject events into the trace stream. CTI also provides a software
control to trigger the same halt events. This can provide fast trace
halt compared to disabling sources and sinks normally in driver
software.
To compile this driver as a module, choose M here: the
module will be called coresight-cti.
config CORESIGHT_CTI_INTEGRATION_REGS
bool "Access CTI CoreSight Integration Registers"
depends on CORESIGHT_CTI
help
This option adds support for the CoreSight integration registers on
this device. The integration registers allow the exploration of the
CTI trigger connections between this and other devices.These
registers are not used in normal operation and can leave devices in
an inconsistent state.
config CORESIGHT_TRBE
tristate "Trace Buffer Extension (TRBE) driver"
depends on ARM64 && CORESIGHT_SOURCE_ETM4X
help
This driver provides support for percpu Trace Buffer Extension (TRBE).
TRBE always needs to be used along with its corresponding percpu ETE
component. ETE generates trace data which is then captured with TRBE.
Unlike traditional sink devices, TRBE is a CPU feature accessible via
system registers. But its explicit dependency with trace unit (ETE)
requires it to be plugged in as a coresight sink device.
To compile this driver as a module, choose M here: the module will be
called coresight-trbe.
config ULTRASOC_SMB
tristate "Ultrasoc system memory buffer drivers"
depends on ACPI || COMPILE_TEST
depends on ARM64 && CORESIGHT_LINKS_AND_SINKS
help
This driver provides support for the Ultrasoc system memory buffer (SMB).
SMB is responsible for receiving the trace data from Coresight ETM devices
and storing them to a system buffer.
To compile this driver as a module, choose M here: the module will be
called ultrasoc-smb.
config CORESIGHT_TPDM
tristate "CoreSight Trace, Profiling & Diagnostics Monitor driver"
select CORESIGHT_LINKS_AND_SINKS
select CORESIGHT_TPDA
help
This driver provides support for configuring monitor. Monitors are
primarily responsible for data set collection and support the
ability to collect any permutation of data set types.
To compile this driver as a module, choose M here: the module will be
called coresight-tpdm.
config CORESIGHT_TPDA
tristate "CoreSight Trace, Profiling & Diagnostics Aggregator driver"
help
This driver provides support for configuring aggregator. This is
primarily useful for pulling the data sets from one or more
attached monitors and pushing the resultant data out. Multiple
monitors are connected on different input ports of TPDA.
To compile this driver as a module, choose M here: the module will be
called coresight-tpda.
config CORESIGHT_DUMMY
tristate "Dummy driver support"
help
Enables support for dummy driver. Dummy driver can be used for
CoreSight sources/sinks that are owned and configured by some
other subsystem and use Linux drivers to configure rest of trace
path.
To compile this driver as a module, choose M here: the module will be
called coresight-dummy.
endif
Codebase Browser
linux