// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/drivers/mfd/mcp-sa11x0.c
*
* Copyright (C) 2001-2005 Russell King
*
* SA11x0 MCP (Multimedia Communications Port) driver.
*
* MCP read/write timeouts from Jordi Colomer, rehacked by rmk.
*/
#include <linux/module.h>
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/mfd/mcp.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <linux/platform_data/mfd-mcp-sa11x0.h>
#define DRIVER_NAME "sa11x0-mcp"
struct mcp_sa11x0 {
void __iomem *base0;
void __iomem *base1;
u32 mccr0;
u32 mccr1;
};
/* Register offsets */
#define MCCR0(m) ((m)->base0 + 0x00)
#define MCDR0(m) ((m)->base0 + 0x08)
#define MCDR1(m) ((m)->base0 + 0x0c)
#define MCDR2(m) ((m)->base0 + 0x10)
#define MCSR(m) ((m)->base0 + 0x18)
#define MCCR1(m) ((m)->base1 + 0x00)
#define priv(mcp) ((struct mcp_sa11x0 *)mcp_priv(mcp))
static void
mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor)
{
struct mcp_sa11x0 *m = priv(mcp);
divisor /= 32;
m->mccr0 &= ~0x00007f00;
m->mccr0 |= divisor << 8;
writel_relaxed(m->mccr0, MCCR0(m));
}
static void
mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
{
struct mcp_sa11x0 *m = priv(mcp);
divisor /= 32;
m->mccr0 &= ~0x0000007f;
m->mccr0 |= divisor;
writel_relaxed(m->mccr0, MCCR0(m));
}
/*
* Write data to the device. The bit should be set after 3 subframe
* times (each frame is 64 clocks). We wait a maximum of 6 subframes.
* We really should try doing something more productive while we
* wait.
*/
static void
mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val)
{
struct mcp_sa11x0 *m = priv(mcp);
int ret = -ETIME;
int i;
writel_relaxed(reg << 17 | MCDR2_Wr | (val & 0xffff), MCDR2(m));
for (i = 0; i < 2; i++) {
udelay(mcp->rw_timeout);
if (readl_relaxed(MCSR(m)) & MCSR_CWC) {
ret = 0;
break;
}
}
if (ret < 0)
printk(KERN_WARNING "mcp: write timed out\n");
}
/*
* Read data from the device. The bit should be set after 3 subframe
* times (each frame is 64 clocks). We wait a maximum of 6 subframes.
* We really should try doing something more productive while we
* wait.
*/
static unsigned int
mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
{
struct mcp_sa11x0 *m = priv(mcp);
int ret = -ETIME;
int i;
writel_relaxed(reg << 17 | MCDR2_Rd, MCDR2(m));
for (i = 0; i < 2; i++) {
udelay(mcp->rw_timeout);
if (readl_relaxed(MCSR(m)) & MCSR_CRC) {
ret = readl_relaxed(MCDR2(m)) & 0xffff;
break;
}
}
if (ret < 0)
printk(KERN_WARNING "mcp: read timed out\n");
return ret;
}
static void mcp_sa11x0_enable(struct mcp *mcp)
{
struct mcp_sa11x0 *m = priv(mcp);
writel(-1, MCSR(m));
m->mccr0 |= MCCR0_MCE;
writel_relaxed(m->mccr0, MCCR0(m));
}
static void mcp_sa11x0_disable(struct mcp *mcp)
{
struct mcp_sa11x0 *m = priv(mcp);
m->mccr0 &= ~MCCR0_MCE;
writel_relaxed(m->mccr0, MCCR0(m));
}
/*
* Our methods.
*/
static struct mcp_ops mcp_sa11x0 = {
.set_telecom_divisor = mcp_sa11x0_set_telecom_divisor,
.set_audio_divisor = mcp_sa11x0_set_audio_divisor,
.reg_write = mcp_sa11x0_write,
.reg_read = mcp_sa11x0_read,
.enable = mcp_sa11x0_enable,
.disable = mcp_sa11x0_disable,
};
static int mcp_sa11x0_probe(struct platform_device *dev)
{
struct mcp_plat_data *data = dev_get_platdata(&dev->dev);
struct resource *mem0, *mem1;
struct mcp_sa11x0 *m;
struct mcp *mcp;
int ret;
if (!data)
return -ENODEV;
mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
if (!mem0 || !mem1)
return -ENXIO;
if (!request_mem_region(mem0->start, resource_size(mem0),
DRIVER_NAME)) {
ret = -EBUSY;
goto err_mem0;
}
if (!request_mem_region(mem1->start, resource_size(mem1),
DRIVER_NAME)) {
ret = -EBUSY;
goto err_mem1;
}
mcp = mcp_host_alloc(&dev->dev, sizeof(struct mcp_sa11x0));
if (!mcp) {
ret = -ENOMEM;
goto err_alloc;
}
mcp->owner = THIS_MODULE;
mcp->ops = &mcp_sa11x0;
mcp->sclk_rate = data->sclk_rate;
m = priv(mcp);
m->mccr0 = data->mccr0 | 0x7f7f;
m->mccr1 = data->mccr1;
m->base0 = ioremap(mem0->start, resource_size(mem0));
m->base1 = ioremap(mem1->start, resource_size(mem1));
if (!m->base0 || !m->base1) {
ret = -ENOMEM;
goto err_ioremap;
}
platform_set_drvdata(dev, mcp);
/*
* Initialise device. Note that we initially
* set the sampling rate to minimum.
*/
writel_relaxed(-1, MCSR(m));
writel_relaxed(m->mccr1, MCCR1(m));
writel_relaxed(m->mccr0, MCCR0(m));
/*
* Calculate the read/write timeout (us) from the bit clock
* rate. This is the period for 3 64-bit frames. Always
* round this time up.
*/
mcp->rw_timeout = DIV_ROUND_UP(64 * 3 * 1000000, mcp->sclk_rate);
ret = mcp_host_add(mcp, data->codec_pdata);
if (ret == 0)
return 0;
err_ioremap:
iounmap(m->base1);
iounmap(m->base0);
mcp_host_free(mcp);
err_alloc:
release_mem_region(mem1->start, resource_size(mem1));
err_mem1:
release_mem_region(mem0->start, resource_size(mem0));
err_mem0:
return ret;
}
static void mcp_sa11x0_remove(struct platform_device *dev)
{
struct mcp *mcp = platform_get_drvdata(dev);
struct mcp_sa11x0 *m = priv(mcp);
struct resource *mem0, *mem1;
if (m->mccr0 & MCCR0_MCE)
dev_warn(&dev->dev,
"device left active (missing disable call?)\n");
mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
mcp_host_del(mcp);
iounmap(m->base1);
iounmap(m->base0);
mcp_host_free(mcp);
release_mem_region(mem1->start, resource_size(mem1));
release_mem_region(mem0->start, resource_size(mem0));
}
static int mcp_sa11x0_suspend(struct device *dev)
{
struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev));
if (m->mccr0 & MCCR0_MCE)
dev_warn(dev, "device left active (missing disable call?)\n");
writel(m->mccr0 & ~MCCR0_MCE, MCCR0(m));
return 0;
}
static int mcp_sa11x0_resume(struct device *dev)
{
struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev));
writel_relaxed(m->mccr1, MCCR1(m));
writel_relaxed(m->mccr0, MCCR0(m));
return 0;
}
static const struct dev_pm_ops mcp_sa11x0_pm_ops = {
.suspend = mcp_sa11x0_suspend,
.freeze = mcp_sa11x0_suspend,
.poweroff = mcp_sa11x0_suspend,
.resume_noirq = mcp_sa11x0_resume,
.thaw_noirq = mcp_sa11x0_resume,
.restore_noirq = mcp_sa11x0_resume,
};
static struct platform_driver mcp_sa11x0_driver = {
.probe = mcp_sa11x0_probe,
.remove_new = mcp_sa11x0_remove,
.driver = {
.name = DRIVER_NAME,
.pm = pm_sleep_ptr(&mcp_sa11x0_pm_ops),
},
};
/*
* This needs re-working
*/
module_platform_driver(mcp_sa11x0_driver);
MODULE_ALIAS("platform:" DRIVER_NAME);
MODULE_AUTHOR("Russell King <[email protected]>");
MODULE_DESCRIPTION("SA11x0 multimedia communications port driver");
MODULE_LICENSE("GPL");
Codebase Browser
linux