# SPDX-License-Identifier: GPL-2.0-only
#
# Proximity sensors
#
menu "Lightning sensors"
config AS3935
tristate "AS3935 Franklin lightning sensor"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
depends on SPI
help
Say Y here to build SPI interface support for the Austrian
Microsystems AS3935 lightning detection sensor.
To compile this driver as a module, choose M here: the
module will be called as3935
endmenu
menu "Proximity and distance sensors"
config CROS_EC_MKBP_PROXIMITY
tristate "ChromeOS EC MKBP Proximity sensor"
depends on CROS_EC
help
Say Y here to enable the proximity sensor implemented via the ChromeOS EC MKBP
switches protocol. You must enable one bus option (CROS_EC_I2C or CROS_EC_SPI)
to use this.
To compile this driver as a module, choose M here: the
module will be called cros_ec_mkbp_proximity.
config IRSD200
tristate "Murata IRS-D200 PIR sensor"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select REGMAP_I2C
depends on I2C
help
Say Y here to build a driver for the Murata IRS-D200 PIR sensor.
To compile this driver as a module, choose M here: the module will be
called irsd200.
config ISL29501
tristate "Intersil ISL29501 Time Of Flight sensor"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select IIO_KFIFO_BUF
help
Say Y here if you want to build a driver for the Intersil ISL29501
Time of Flight sensor.
To compile this driver as a module, choose M here: the module will be
called isl29501.
config LIDAR_LITE_V2
tristate "PulsedLight LIDAR sensor"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
depends on I2C
help
Say Y to build a driver for PulsedLight LIDAR range finding
sensor.
To compile this driver as a module, choose M here: the
module will be called pulsedlight-lite-v2
config MB1232
tristate "MaxSonar I2CXL family ultrasonic sensors"
depends on I2C
help
Say Y to build a driver for the ultrasonic sensors I2CXL of
MaxBotix which have an i2c interface. It can be used to measure
the distance of objects. Supported types are mb1202, mb1212,
mb1222, mb1232, mb1242, mb7040, mb7137
To compile this driver as a module, choose M here: the
module will be called mb1232.
config PING
tristate "Parallax GPIO bitbanged ranger sensors"
depends on GPIOLIB
help
Say Y here to build a driver for GPIO bitbanged ranger sensors
with just one GPIO for the trigger and echo. This driver can be
used to measure the distance of objects.
Actually supported are:
- Parallax PING))) (ultrasonic)
- Parallax LaserPING (time-of-flight)
To compile this driver as a module, choose M here: the
module will be called ping.
config RFD77402
tristate "RFD77402 ToF sensor"
depends on I2C
help
Say Y to build a driver for the RFD77402 Time-of-Flight (distance)
sensor module with I2C interface.
To compile this driver as a module, choose M here: the
module will be called rfd77402.
config SRF04
tristate "GPIO bitbanged ultrasonic ranger sensor (SRF04, MB1000)"
depends on GPIOLIB
help
Say Y here to build a driver for GPIO bitbanged ultrasonic
ranger sensor. This driver can be used to measure the distance
of objects. It is using two GPIOs.
Actually Supported types are:
- Devantech SRF04
- Maxbotix mb1000
- Maxbotix mb1010
- Maxbotix mb1020
- Maxbotix mb1030
- Maxbotix mb1040
To compile this driver as a module, choose M here: the
module will be called srf04.
config SX_COMMON
tristate
help
Common Semtech proximity sensor code.
config SX9310
tristate "SX9310/SX9311 Semtech proximity sensor"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select REGMAP_I2C
select SX_COMMON
depends on I2C
help
Say Y here to build a driver for Semtech's SX9310/SX9311 capacitive
proximity/button sensor.
To compile this driver as a module, choose M here: the
module will be called sx9310.
config SX9324
tristate "SX9324 Semtech proximity sensor"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select REGMAP_I2C
select SX_COMMON
depends on I2C
help
Say Y here to build a driver for Semtech's SX9324
proximity/button sensor.
To compile this driver as a module, choose M here: the
module will be called sx9324.
config SX9360
tristate "SX9360 Semtech proximity sensor"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select REGMAP_I2C
select SX_COMMON
depends on I2C
help
Say Y here to build a driver for Semtech's SX9360
proximity/button sensor, a simplified SX9324.
To compile this driver as a module, choose M here: the
module will be called sx9360.
config SX9500
tristate "SX9500 Semtech proximity sensor"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select REGMAP_I2C
depends on I2C
help
Say Y here to build a driver for Semtech's SX9500 capacitive
proximity/button sensor.
To compile this driver as a module, choose M here: the
module will be called sx9500.
config SRF08
tristate "Devantech SRF02/SRF08/SRF10 ultrasonic ranger sensor"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
depends on I2C
help
Say Y here to build a driver for Devantech SRF02/SRF08/SRF10
ultrasonic ranger sensors with i2c interface.
This driver can be used to measure the distance of objects.
To compile this driver as a module, choose M here: the
module will be called srf08.
config VCNL3020
tristate "VCNL3020 proximity sensor"
select REGMAP_I2C
depends on I2C
help
Say Y here if you want to build a driver for the Vishay VCNL3020
proximity sensor.
To compile this driver as a module, choose M here: the
module will be called vcnl3020.
config VL53L0X_I2C
tristate "STMicroelectronics VL53L0X ToF ranger sensor (I2C)"
depends on I2C
help
Say Y here to build a driver for STMicroelectronics VL53L0X
ToF ranger sensors with i2c interface.
This driver can be used to measure the distance of objects.
To compile this driver as a module, choose M here: the
module will be called vl53l0x-i2c.
endmenu
Codebase Browser
linux