# SPDX-License-Identifier: GPL-2.0-only
config DVB_USB
tristate "Support for various USB DVB devices"
depends on DVB_CORE && USB && I2C && RC_CORE
select CYPRESS_FIRMWARE
help
By enabling this you will be able to choose the various supported
USB1.1 and USB2.0 DVB devices.
Almost every USB device needs a firmware, please look into
<file:Documentation/driver-api/media/drivers/dvb-usb.rst>.
For a complete list of supported USB devices see the LinuxTV DVB Wiki:
<https://linuxtv.org/wiki/index.php/DVB_USB>
Say Y if you own a USB DVB device.
config DVB_USB_DEBUG
bool "Enable extended debug support for all DVB-USB devices"
depends on DVB_USB
help
Say Y if you want to enable debugging. See modinfo dvb-usb (and the
appropriate drivers) for debug levels.
if DVB_USB
config DVB_USB_A800
tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)"
depends on DVB_USB
select DVB_USB_DIB3000MC
select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
config DVB_USB_AF9005
tristate "Afatech AF9005 DVB-T USB1.1 support"
depends on DVB_USB
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver
and the TerraTec Cinergy T USB XE (Rev.1)
config DVB_USB_AF9005_REMOTE
tristate "Afatech AF9005 default remote control support"
depends on DVB_USB_AF9005
help
Say Y here to support the default remote control decoding for the
Afatech AF9005 based receiver.
config DVB_USB_AZ6027
tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support"
depends on DVB_USB
select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the AZ6027 device
config DVB_USB_CINERGY_T2
tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver"
depends on DVB_USB
help
Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers
Say Y if you own such a device and want to use it.
config DVB_USB_CXUSB
tristate "Conexant USB2.0 hybrid reference design support"
depends on DVB_USB
select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
select DVB_CX22702 if MEDIA_SUBDRV_AUTOSELECT
select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT
select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT
select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT
select DVB_ATBM8830 if MEDIA_SUBDRV_AUTOSELECT
select DVB_LGS8GXX if MEDIA_SUBDRV_AUTOSELECT
select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MAX2165 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the Conexant USB2.0 hybrid reference design.
DVB and ATSC modes are supported, for a basic analog mode support
see the next option ("Analog support for the Conexant USB2.0 hybrid
reference design").
Devices that require this module:
Medion MD95700 hybrid USB2.0 device.
DViCO FusionHDTV (Bluebird) USB2.0 devices
config DVB_USB_CXUSB_ANALOG
bool "Analog support for the Conexant USB2.0 hybrid reference design"
depends on DVB_USB_CXUSB && VIDEO_DEV
depends on VIDEO_DEV=y || VIDEO_DEV=DVB_USB_CXUSB
select VIDEO_CX25840
select VIDEOBUF2_VMALLOC
help
Say Y here to enable basic analog mode support for the Conexant
USB2.0 hybrid reference design.
Currently this mode is supported only on a Medion MD95700 device.
config DVB_USB_DIB0700
tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)"
depends on DVB_USB
select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT
select DVB_DIB7000M if MEDIA_SUBDRV_AUTOSELECT
select DVB_DIB8000 if MEDIA_SUBDRV_AUTOSELECT
select DVB_USB_DIB3000MC if MEDIA_SUBDRV_AUTOSELECT
select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT
select DVB_MN88472 if MEDIA_SUBDRV_AUTOSELECT
select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT
select DVB_TUNER_DIB0090 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT2266 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_XC4000 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA18250 if MEDIA_SUBDRV_AUTOSELECT
help
Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
USB bridge is also present in devices having the DiB7700 DVB-T-USB
silicon. This chip can be found in devices offered by Hauppauge,
Avermedia and other big and small companies.
For an up-to-date list of devices supported by this driver, have a look
on the LinuxTV Wiki at www.linuxtv.org.
Say Y if you own such a device and want to use it. You should build it as
a module.
config DVB_USB_DIB3000MC
tristate
depends on DVB_USB
select DVB_DIB3000MC
help
This is a module with helper functions for accessing the
DIB3000MC from USB DVB devices. It must be a separate module
in case DVB_USB is built-in and DVB_DIB3000MC is a module,
and gets selected automatically when needed.
config DVB_USB_DIBUSB_MB
tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)"
depends on DVB_USB
select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
select DVB_DIB3000MB
depends on DVB_DIB3000MC || !DVB_DIB3000MC
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
help
Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by
DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator.
For an up-to-date list of devices supported by this driver, have a look
on the Linux-DVB Wiki at www.linuxtv.org.
Say Y if you own such a device and want to use it. You should build it as
a module.
config DVB_USB_DIBUSB_MB_FAULTY
bool "Support faulty USB IDs"
depends on DVB_USB_DIBUSB_MB
help
Support for faulty USB IDs due to an invalid EEPROM on some Artec devices.
config DVB_USB_DIBUSB_MC
tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)"
depends on DVB_USB
select DVB_USB_DIB3000MC
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
help
Support for USB2.0 DVB-T receivers based on reference designs made by
DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator.
For an up-to-date list of devices supported by this driver, have a look
on the Linux-DVB Wiki at www.linuxtv.org.
Say Y if you own such a device and want to use it. You should build it as
a module.
config DVB_USB_DIGITV
tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"
depends on DVB_USB
select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
select DVB_NXT6000 if MEDIA_SUBDRV_AUTOSELECT
select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver.
config DVB_USB_DTT200U
tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)"
depends on DVB_USB
help
Say Y here to support the WideView/Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver.
The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan).
The WT-220U and its clones are pen-sized.
config DVB_USB_DTV5100
tristate "AME DTV-5100 USB2.0 DVB-T support"
depends on DVB_USB
select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver.
config DVB_USB_DW2102
tristate "DvbWorld & TeVii DVB-S/S2 USB2.0 support"
depends on DVB_USB
select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT
select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT
select DVB_SI21XX if MEDIA_SUBDRV_AUTOSELECT
select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
select DVB_MT312 if MEDIA_SUBDRV_AUTOSELECT
select DVB_ZL10039 if MEDIA_SUBDRV_AUTOSELECT
select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT
select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT
select DVB_M88RS2000 if MEDIA_SUBDRV_AUTOSELECT
select DVB_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the DvbWorld, TeVii, Prof, TechnoTrend
DVB-S/S2 USB2.0 receivers.
config DVB_USB_GP8PSK
tristate "GENPIX 8PSK->USB module support"
depends on DVB_USB
help
Say Y here to support the
GENPIX 8psk module
DVB-S USB2.0 receivers.
config DVB_USB_M920X
tristate "Uli m920x DVB-T USB2.0 support"
depends on DVB_USB
select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
Currently, only devices with a product id of
"DTV USB MINI" (in cold state) are supported.
Firmware required.
config DVB_USB_NOVA_T_USB2
tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
depends on DVB_USB
select DVB_USB_DIB3000MC
select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
config DVB_USB_OPERA1
tristate "Opera1 DVB-S USB2.0 receiver"
depends on DVB_USB
select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the Opera DVB-S USB2.0 receiver.
config DVB_USB_PCTV452E
tristate "Pinnacle PCTV HDTV Pro USB device/TT Connect S2-3600"
depends on DVB_USB
select TTPCI_EEPROM
select DVB_ISL6423 if MEDIA_SUBDRV_AUTOSELECT
select DVB_LNBP22 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
help
Support for external USB adapter designed by Pinnacle,
shipped under the brand name 'PCTV HDTV Pro USB'.
Also supports TT Connect S2-3600/3650 cards.
Say Y if you own such a device and want to use it.
config DVB_USB_TECHNISAT_USB2
tristate "Technisat DVB-S/S2 USB2.0 support"
depends on DVB_USB
select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT
select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the Technisat USB2 DVB-S/S2 device
config DVB_USB_TTUSB2
tristate "Pinnacle 400e DVB-S USB2.0 support"
depends on DVB_USB
select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT
select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT
select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver and
the TechnoTrend CT-3650 CI DVB-C/T USB2.0 receiver. The
firmware protocol used by this module is similar to the one used by the
old ttusb-driver - that's why the module is called dvb-usb-ttusb2.
config DVB_USB_UMT_010
tristate "HanfTek UMT-010 DVB-T USB2.0 support"
depends on DVB_USB
select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
select DVB_USB_DIB3000MC
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
config DVB_USB_VP702X
tristate "TwinhanDTV StarBox and clones DVB-S USB2.0 support"
depends on DVB_USB
help
Say Y here to support the
TwinhanDTV StarBox,
DigitalRise USB Starbox and
TYPHOON DVB-S USB 2.0 BOX
DVB-S USB2.0 receivers.
config DVB_USB_VP7045
tristate "TwinhanDTV Alpha/MagicBoxII, DNTV tinyUSB2, Beetle USB2.0 support"
depends on DVB_USB
help
Say Y here to support the
TwinhanDTV Alpha (stick) (VP-7045),
TwinhanDTV MagicBox II (VP-7046),
DigitalNow TinyUSB 2 DVB-t,
DigitalRise USB 2.0 Ter (Beetle) and
TYPHOON DVB-T USB DRIVE
DVB-T USB2.0 receivers.
endif
Codebase Browser
linux