What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
Date: Feb 2014
Contact: Li Jun <[email protected]>
Description:
Can be set and read.
Set a_bus_req(A-device bus request) input to be 1 if
the application running on the A-device wants to use the bus,
and to be 0 when the application no longer wants to use
the bus(or wants to work as peripheral). a_bus_req can also
be set to 1 by kernel in response to remote wakeup signaling
from the B-device, the A-device should decide to resume the bus.
Valid values are "1" and "0".
Reading: returns 1 if the application running on the A-device
is using the bus as host role, otherwise 0.
What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
Date: Feb 2014
Contact: Li Jun <[email protected]>
Description:
Can be set and read
The a_bus_drop(A-device bus drop) input is 1 when the
application running on the A-device wants to power down
the bus, and is 0 otherwise, When a_bus_drop is 1, then
the a_bus_req shall be 0.
Valid values are "1" and "0".
Reading: returns 1 if the bus is off(vbus is turned off) by
A-device, otherwise 0.
What: /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
Date: Feb 2014
Contact: Li Jun <[email protected]>
Description:
Can be set and read.
The b_bus_req(B-device bus request) input is 1 during the time
that the application running on the B-device wants to use the
bus as host, and is 0 when the application no longer wants to
work as host and decides to switch back to be peripheral.
Valid values are "1" and "0".
Reading: returns if the application running on the B device
is using the bus as host role, otherwise 0.
What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_clr_err
Date: Feb 2014
Contact: Li Jun <[email protected]>
Description:
Only can be set.
The a_clr_err(A-device Vbus error clear) input is used to clear
vbus error, then A-device will power down the bus.
Valid value is "1"
Codebase Browser
linux