linux/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/wireless/mediatek,mt76.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: MediaTek mt76 wireless devices

maintainers:
  - Felix Fietkau <[email protected]>
  - Lorenzo Bianconi <[email protected]>
  - Ryder Lee <[email protected]>

description: |
  This node provides properties for configuring the MediaTek mt76xx
  wireless device. The node is expected to be specified as a child
  node of the PCI controller to which the wireless chip is connected.
  Alternatively, it can specify the wireless part of the MT7628/MT7688
  or MT7622/MT7986 SoC.

properties:
  compatible:
    enum:
      - mediatek,mt76
      - mediatek,mt7628-wmac
      - mediatek,mt7622-wmac
      - mediatek,mt7981-wmac
      - mediatek,mt7986-wmac

  reg:
    minItems: 1
    maxItems: 3
    description:
      MT7986 should contain 3 regions consys, dcm, and sku, in this order.

  interrupts:
    minItems: 1
    items:
      - description: major interrupt for rings
      - description: additional interrupt for ring 19
      - description: additional interrupt for ring 4
      - description: additional interrupt for ring 5

  power-domains:
    maxItems: 1

  memory-region:
    maxItems: 1

  resets:
    maxItems: 1
    description:
      Specify the consys reset for mt7986.

  reset-names:
    const: consys

  clocks:
    maxItems: 2
    description:
      Specify the consys clocks for mt7986.

  clock-names:
    items:
      - const: mcu
      - const: ap2conn

  mediatek,infracfg:
    $ref: /schemas/types.yaml#/definitions/phandle
    description:
      Phandle to the infrastructure bus fabric syscon node.
      This property is MT7622 specific

  ieee80211-freq-limit: true

  nvmem-cells:
    items:
      - description: NVMEM cell with EEPROM

  nvmem-cell-names:
    items:
      - const: eeprom

  mediatek,eeprom-data:
    $ref: /schemas/types.yaml#/definitions/uint32-array
    description:
      EEPROM data embedded as array.

  mediatek,mtd-eeprom:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    items:
      - items:
          - description: phandle to MTD partition
          - description: offset containing EEPROM data
    description:
      Phandle to a MTD partition + offset containing EEPROM data
    deprecated: true

  big-endian:
    $ref: /schemas/types.yaml#/definitions/flag
    description:
      Specify if the radio eeprom partition is written in big-endian

  mediatek,eeprom-merge-otp:
    type: boolean
    description:
      Merge EEPROM data with OTP data. Can be used on boards where the flash
      calibration data is generic and specific calibration data should be
      pulled from the OTP ROM

  mediatek,disable-radar-background:
    type: boolean
    description:
      Disable/enable radar/CAC detection running on a dedicated offchannel
      chain available on some hw.
      Background radar/CAC detection allows to avoid the CAC downtime
      switching on a different channel during CAC detection on the selected
      radar channel.

  led:
    type: object
    $ref: /schemas/leds/common.yaml#
    additionalProperties: false
    properties:
      led-active-low:
        description:
          LED is enabled with ground signal.
        type: boolean

      led-sources:
        maxItems: 1

  power-limits:
    type: object
    additionalProperties: false
    patternProperties:
      "^r[0-9]+":
        type: object
        additionalProperties: false
        properties:
          regdomain:
            $ref: /schemas/types.yaml#/definitions/string
            description:
              Regdomain refers to a legal regulatory region. Different
              countries define different levels of allowable transmitter
              power, time that a channel can be occupied, and different
              available channels
            enum:
              - FCC
              - ETSI
              - JP

        patternProperties:
          "^txpower-[256]g$":
            type: object
            additionalProperties: false
            patternProperties:
              "^b[0-9]+$":
                type: object
                additionalProperties: false
                properties:
                  channels:
                    $ref: /schemas/types.yaml#/definitions/uint32-array
                    minItems: 2
                    maxItems: 2
                    description:
                      Pairs of first and last channel number of the selected
                      band

                  rates-cck:
                    $ref: /schemas/types.yaml#/definitions/uint8-array
                    minItems: 4
                    maxItems: 4
                    description:
                      4 half-dBm per-rate power limit values

                  rates-ofdm:
                    $ref: /schemas/types.yaml#/definitions/uint8-array
                    minItems: 8
                    maxItems: 8
                    description:
                      8 half-dBm per-rate power limit values

                  rates-mcs:
                    $ref: /schemas/types.yaml#/definitions/uint8-matrix
                    description:
                      Sets of per-rate power limit values for 802.11n/802.11ac
                      rates for multiple channel bandwidth settings.
                      Each set starts with the number of channel bandwidth
                      settings for which the rate set applies, followed by
                      either 8 or 10 power limit values. The order of the
                      channel bandwidth settings is 20, 40, 80 and 160 MHz.
                    maxItems: 4
                    items:
                      minItems: 9
                      maxItems: 11

                  rates-ru:
                    $ref: /schemas/types.yaml#/definitions/uint8-matrix
                    description:
                      Sets of per-rate power limit values for 802.11ax rates
                      for multiple channel bandwidth or resource unit settings.
                      Each set starts with the number of channel bandwidth or
                      resource unit settings for which the rate set applies,
                      followed by 12 power limit values. The order of the
                      channel resource unit settings is RU26, RU52, RU106,
                      RU242/SU20, RU484/SU40, RU996/SU80 and RU2x996/SU160.
                    items:
                      minItems: 13
                      maxItems: 13

                  txs-delta:
                    $ref: /schemas/types.yaml#/definitions/uint32-array
                    description:
                      Half-dBm power delta for different numbers of antennas

required:
  - compatible
  - reg

allOf:
  - $ref: ieee80211.yaml#
  - if:
      properties:
        compatible:
          contains:
            enum:
              - mediatek,mt7981-wmac
              - mediatek,mt7986-wmac
    then:
      properties:
        interrupts:
          minItems: 4
    else:
      properties:
        interrupts:
          maxItems: 1

unevaluatedProperties: false

examples:
  - |
    pcie0 {
      #address-cells = <3>;
      #size-cells = <2>;
      wifi@0,0 {
        compatible = "mediatek,mt76";
        reg = <0x0000 0 0 0 0>;
        ieee80211-freq-limit = <5000000 6000000>;
        mediatek,mtd-eeprom = <&factory 0x8000>;
        big-endian;

        led {
          led-sources = <2>;
        };

        power-limits {
          r0 {
            regdomain = "FCC";
            txpower-5g {
               b0 {
                   channels = <36 48>;
                   rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
                   rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
                               /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
                   rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>,
                              /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>;
               };
               b1 {
                   channels = <100 181>;
                   rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>;
                   rates-mcs = /bits/ 8  <4 14 14 14 14 14 14 14 14 14 14>;
                   txs-delta = <12 9 6>;
                   rates-ru = /bits/ 8  <7 14 14 14 14 14 14 14 14 14 14 14 14>;
               };
             };
          };
        };
      };
    };

  - |
    wifi@10300000 {
      compatible = "mediatek,mt7628-wmac";
      reg = <0x10300000 0x100000>;

      interrupt-parent = <&cpuintc>;
      interrupts = <6>;

      nvmem-cells = <&eeprom>;
      nvmem-cell-names = "eeprom";
    };

  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/interrupt-controller/irq.h>
    wifi@18000000 {
      compatible = "mediatek,mt7622-wmac";
      reg = <0x10300000 0x100000>;
      interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;

      mediatek,infracfg = <&infracfg>;

      power-domains = <&scpsys 3>;
    };

  - |
    wifi@18000000 {
        compatible = "mediatek,mt7986-wmac";
        resets = <&watchdog 23>;
        reset-names = "consys";
        reg = <0x18000000 0x1000000>,
              <0x10003000 0x1000>,
              <0x11d10000 0x1000>;
        interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&topckgen 50>,
                 <&topckgen 62>;
        clock-names = "mcu", "ap2conn";
        memory-region = <&wmcpu_emi>;
    };