# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/msm/qcom,x1e80100-mdss.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm X1E80100 Display MDSS
maintainers:
- Abel Vesa <[email protected]>
description:
X1E80100 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
DPU display controller, DP interfaces, etc.
$ref: /schemas/display/msm/mdss-common.yaml#
properties:
compatible:
const: qcom,x1e80100-mdss
clocks:
items:
- description: Display AHB
- description: Display hf AXI
- description: Display core
iommus:
maxItems: 1
interconnects:
maxItems: 3
interconnect-names:
maxItems: 3
patternProperties:
"^display-controller@[0-9a-f]+$":
type: object
additionalProperties: true
properties:
compatible:
const: qcom,x1e80100-dpu
"^displayport-controller@[0-9a-f]+$":
type: object
additionalProperties: true
properties:
compatible:
const: qcom,x1e80100-dp
"^phy@[0-9a-f]+$":
type: object
additionalProperties: true
properties:
compatible:
const: qcom,x1e80100-dp-phy
required:
- compatible
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom,rpmhpd.h>
display-subsystem@ae00000 {
compatible = "qcom,x1e80100-mdss";
reg = <0x0ae00000 0x1000>;
reg-names = "mdss";
interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
<&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_DISPLAY_CFG 0>;
interconnect-names = "mdp0-mem", "mdp1-mem", "cpu-cfg";
resets = <&dispcc_core_bcr>;
power-domains = <&dispcc_gdsc>;
clocks = <&dispcc_ahb_clk>,
<&gcc_disp_hf_axi_clk>,
<&dispcc_mdp_clk>;
clock-names = "bus", "nrt_bus", "core";
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
iommus = <&apps_smmu 0x1c00 0x2>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
display-controller@ae01000 {
compatible = "qcom,x1e80100-dpu";
reg = <0x0ae01000 0x8f000>,
<0x0aeb0000 0x2008>;
reg-names = "mdp", "vbif";
clocks = <&gcc_axi_clk>,
<&dispcc_ahb_clk>,
<&dispcc_mdp_lut_clk>,
<&dispcc_mdp_clk>,
<&dispcc_mdp_vsync_clk>;
clock-names = "nrt_bus",
"iface",
"lut",
"core",
"vsync";
assigned-clocks = <&dispcc_mdp_vsync_clk>;
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
interrupt-parent = <&mdss>;
interrupts = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dpu_intf1_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
port@1 {
reg = <1>;
dpu_intf2_out: endpoint {
remote-endpoint = <&dsi1_in>;
};
};
};
mdp_opp_table: opp-table {
compatible = "operating-points-v2";
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-325000000 {
opp-hz = /bits/ 64 <325000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-375000000 {
opp-hz = /bits/ 64 <375000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-514000000 {
opp-hz = /bits/ 64 <514000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
displayport-controller@ae90000 {
compatible = "qcom,x1e80100-dp";
reg = <0 0xae90000 0 0x200>,
<0 0xae90200 0 0x200>,
<0 0xae90400 0 0x600>,
<0 0xae91000 0 0x400>,
<0 0xae91400 0 0x400>;
interrupt-parent = <&mdss>;
interrupts = <12>;
clocks = <&dispcc_mdss_ahb_clk>,
<&dispcc_dptx0_aux_clk>,
<&dispcc_dptx0_link_clk>,
<&dispcc_dptx0_link_intf_clk>,
<&dispcc_dptx0_pixel0_clk>;
clock-names = "core_iface", "core_aux",
"ctrl_link",
"ctrl_link_iface",
"stream_pixel";
assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>,
<&dispcc_mdss_dptx0_pixel0_clk_src>;
assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
<&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
operating-points-v2 = <&mdss_dp0_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>;
phy-names = "dp";
#sound-dai-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dp0_in: endpoint {
remote-endpoint = <&mdss_intf0_out>;
};
};
port@1 {
reg = <1>;
mdss_dp0_out: endpoint {
};
};
};
mdss_dp0_opp_table: opp-table {
compatible = "operating-points-v2";
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-270000000 {
opp-hz = /bits/ 64 <270000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-540000000 {
opp-hz = /bits/ 64 <540000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-810000000 {
opp-hz = /bits/ 64 <810000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
};
...
Codebase Browser
linux