# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/msm/gpu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Adreno or Snapdragon GPUs
maintainers:
- Rob Clark <[email protected]>
# dtschema does not select nodes based on pattern+const, so add custom select
# as a work-around:
select:
properties:
compatible:
contains:
enum:
- qcom,adreno
- amd,imageon
required:
- compatible
properties:
compatible:
oneOf:
- description: |
The driver is parsing the compat string for Adreno to
figure out the chip-id.
items:
- pattern: '^qcom,adreno-[0-9a-f]{8}$'
- const: qcom,adreno
- description: |
The driver is parsing the compat string for Adreno to
figure out the gpu-id and patch level.
items:
- pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]+$'
- const: qcom,adreno
- description: |
The driver is parsing the compat string for Imageon to
figure out the gpu-id and patch level.
items:
- pattern: '^amd,imageon-200\.[0-1]$'
- const: amd,imageon
clocks:
minItems: 2
maxItems: 7
clock-names:
minItems: 2
maxItems: 7
reg:
minItems: 1
maxItems: 3
reg-names:
minItems: 1
items:
- const: kgsl_3d0_reg_memory
- const: cx_mem
- const: cx_dbgc
interrupts:
maxItems: 1
interrupt-names:
maxItems: 1
interconnects:
minItems: 1
maxItems: 2
interconnect-names:
minItems: 1
items:
- const: gfx-mem
- const: ocmem
iommus:
minItems: 1
maxItems: 64
sram:
$ref: /schemas/types.yaml#/definitions/phandle-array
minItems: 1
maxItems: 4
items:
maxItems: 1
description: |
phandles to one or more reserved on-chip SRAM regions.
phandle to the On Chip Memory (OCMEM) that's present on some a3xx and
a4xx Snapdragon SoCs. See
Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
operating-points-v2: true
opp-table:
type: object
power-domains:
maxItems: 1
zap-shader:
type: object
additionalProperties: false
description: |
For a5xx and a6xx devices this node contains a memory-region that
points to reserved memory to store the zap shader that can be used to
help bring the GPU out of secure mode.
properties:
memory-region:
maxItems: 1
firmware-name:
description: |
Default name of the firmware to load to the remote processor.
"#cooling-cells":
const: 2
nvmem-cell-names:
maxItems: 1
nvmem-cells:
description: efuse registers
maxItems: 1
qcom,gmu:
$ref: /schemas/types.yaml#/definitions/phandle
description: |
For GMU attached devices a phandle to the GMU device that will
control the power for the GPU.
required:
- compatible
- reg
- interrupts
additionalProperties: false
allOf:
- if:
properties:
compatible:
contains:
pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]+$'
then:
properties:
clocks:
minItems: 2
maxItems: 7
clock-names:
items:
anyOf:
- const: core
description: GPU Core clock
- const: iface
description: GPU Interface clock
- const: mem
description: GPU Memory clock
- const: mem_iface
description: GPU Memory Interface clock
- const: alt_mem_iface
description: GPU Alternative Memory Interface clock
- const: gfx3d
description: GPU 3D engine clock
- const: rbbmtimer
description: GPU RBBM Timer for Adreno 5xx series
- const: rbcpr
description: GPU RB Core Power Reduction clock
minItems: 2
maxItems: 7
required:
- clocks
- clock-names
- if:
properties:
compatible:
contains:
enum:
- qcom,adreno-610.0
- qcom,adreno-619.1
then:
properties:
clocks:
minItems: 6
maxItems: 6
clock-names:
items:
- const: core
description: GPU Core clock
- const: iface
description: GPU Interface clock
- const: mem_iface
description: GPU Memory Interface clock
- const: alt_mem_iface
description: GPU Alternative Memory Interface clock
- const: gmu
description: CX GMU clock
- const: xo
description: GPUCC clocksource clock
reg-names:
minItems: 1
items:
- const: kgsl_3d0_reg_memory
- const: cx_dbgc
required:
- clocks
- clock-names
else:
if:
properties:
compatible:
contains:
pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]+$'
then: # Starting with A6xx, the clocks are usually defined in the GMU node
properties:
clocks: false
clock-names: false
reg-names:
minItems: 1
items:
- const: kgsl_3d0_reg_memory
- const: cx_mem
- const: cx_dbgc
examples:
- |
// Example a3xx/4xx:
#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
gpu: gpu@fdb00000 {
compatible = "qcom,adreno-330.2", "qcom,adreno";
reg = <0xfdb00000 0x10000>;
reg-names = "kgsl_3d0_reg_memory";
clock-names = "core", "iface", "mem_iface";
clocks = <&mmcc OXILI_GFX3D_CLK>,
<&mmcc OXILICX_AHB_CLK>,
<&mmcc OXILICX_AXI_CLK>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "kgsl_3d0_irq";
sram = <&gpu_sram>;
power-domains = <&mmcc OXILICX_GDSC>;
operating-points-v2 = <&gpu_opp_table>;
iommus = <&gpu_iommu 0>;
#cooling-cells = <2>;
};
ocmem@fdd00000 {
compatible = "qcom,msm8974-ocmem";
reg = <0xfdd00000 0x2000>,
<0xfec00000 0x180000>;
reg-names = "ctrl", "mem";
clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
<&mmcc OCMEMCX_OCMEMNOC_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xfec00000 0x100000>;
gpu_sram: gpu-sram@0 {
reg = <0x0 0x100000>;
};
};
- |
// Example a6xx (with GMU):
#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interconnect/qcom,sdm845.h>
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
zap_shader_region: gpu@8f200000 {
compatible = "shared-dma-pool";
reg = <0x0 0x90b00000 0x0 0xa00000>;
no-map;
};
};
gpu@5000000 {
compatible = "qcom,adreno-630.2", "qcom,adreno";
reg = <0x5000000 0x40000>, <0x509e000 0x10>;
reg-names = "kgsl_3d0_reg_memory", "cx_mem";
#cooling-cells = <2>;
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&adreno_smmu 0>;
operating-points-v2 = <&gpu_opp_table>;
interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
interconnect-names = "gfx-mem";
qcom,gmu = <&gmu>;
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-430000000 {
opp-hz = /bits/ 64 <430000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
opp-peak-kBps = <5412000>;
};
opp-355000000 {
opp-hz = /bits/ 64 <355000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
opp-peak-kBps = <3072000>;
};
opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
opp-peak-kBps = <3072000>;
};
opp-180000000 {
opp-hz = /bits/ 64 <180000000>;
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
opp-peak-kBps = <1804000>;
};
};
zap-shader {
memory-region = <&zap_shader_region>;
firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn";
};
};
Codebase Browser
linux