# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (c) 2023 Ideas on Board
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/thine,thp7312.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: THine THP7312
maintainers:
- Paul Elder <paul.elder@@ideasonboard.com>
description:
The THP7312 is a standalone ISP controlled over i2c, and is capable of
various image processing and correction functions, including 3A control. It
can be connected to CMOS image sensors from various vendors, supporting both
MIPI CSI-2 and parallel interfaces. It can also output on either MIPI CSI-2
or parallel. The hardware is capable of transmitting and receiving MIPI
interlaved data strams with data types or multiple virtual channel
identifiers.
allOf:
- $ref: /schemas/media/video-interface-devices.yaml#
properties:
compatible:
const: thine,thp7312
reg:
maxItems: 1
clocks:
maxItems: 1
description: CLKI clock input
thine,boot-mode:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1
default: 1
description:
Boot mode of the THP7312, reflecting the value of the BOOT[0] pin strap.
0 is for the SPI/2-wire slave boot, 1 is for the SPI master boot (from
external flash ROM).
reset-gpios:
maxItems: 1
description:
Reference to the GPIO connected to the RESET_N pin, if any.
Must be released (set high) after all supplies are applied.
vddcore-supply:
description:
1.2V supply for core, PLL, MIPI rx and MIPI tx.
vhtermrx-supply:
description:
Supply for input (RX). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel.
vddtx-supply:
description:
Supply for output (TX). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel.
vddhost-supply:
description:
Supply for host interface. 1.8V, 2.8V, or 3.3V.
vddcmos-supply:
description:
Supply for sensor interface. 1.8V, 2.8V, or 3.3V.
vddgpio-0-supply:
description:
Supply for GPIO_0. 1.8V, 2.8V, or 3.3V.
vddgpio-1-supply:
description:
Supply for GPIO_1. 1.8V, 2.8V, or 3.3V.
orientation: true
rotation: true
port:
$ref: /schemas/graph.yaml#/$defs/port-base
additionalProperties: false
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
properties:
bus-type:
const: 4 # CSI-2 D-PHY
data-lanes:
description:
This property is for lane reordering between the THP7312 and the
SoC. The sensor supports either two-lane, or four-lane operation.
If this property is omitted four-lane operation is assumed. For
two-lane operation the property must be set to <1 2>.
minItems: 2
maxItems: 4
items:
maximum: 4
sensors:
type: object
description: List of connected sensors
properties:
"#address-cells":
const: 1
"#size-cells":
const: 0
patternProperties:
"^sensor@[01]$":
type: object
description:
Sensors connected to the first and second input, with one node per
sensor.
properties:
thine,model:
$ref: /schemas/types.yaml#/definitions/string
description:
Model of the connected sensors. Must be a valid compatible string.
reg:
description: THP7312 input port number
items:
- maximum: 1
data-lanes:
$ref: /schemas/media/video-interfaces.yaml#/properties/data-lanes
items:
maxItems: 4
description:
This property is for lane reordering between the THP7312 and the imaging
sensor that it is connected to.
required:
- reg
- data-lanes
additionalProperties: false
required:
- "#address-cells"
- "#size-cells"
additionalProperties: false
required:
- compatible
- reg
- reset-gpios
- clocks
- vddcore-supply
- vhtermrx-supply
- vddtx-supply
- vddhost-supply
- vddcmos-supply
- vddgpio-0-supply
- vddgpio-1-supply
- sensors
- port
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/video-interfaces.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
camera@61 {
compatible = "thine,thp7312";
reg = <0x61>;
pinctrl-names = "default";
pinctrl-0 = <&cam1_pins_default>;
reset-gpios = <&pio 119 GPIO_ACTIVE_LOW>;
clocks = <&camera61_clk>;
vddcore-supply = <&vsys_v4p2>;
vhtermrx-supply = <&vsys_v4p2>;
vddtx-supply = <&vsys_v4p2>;
vddhost-supply = <&vsys_v4p2>;
vddcmos-supply = <&vsys_v4p2>;
vddgpio-0-supply = <&vsys_v4p2>;
vddgpio-1-supply = <&vsys_v4p2>;
orientation = <0>;
rotation = <0>;
sensors {
#address-cells = <1>;
#size-cells = <0>;
sensor@0 {
thine,model = "sony,imx258";
reg = <0>;
data-lanes = <4 1 3 2>;
};
};
port {
thp7312_2_endpoint: endpoint {
remote-endpoint = <&mipi_thp7312_2>;
bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
data-lanes = <4 2 1 3>;
};
};
};
};
...
Codebase Browser
linux