# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/nxp,imx8-isi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: i.MX8 Image Sensing Interface
maintainers:
- Laurent Pinchart <[email protected]>
description: |
The Image Sensing Interface (ISI) combines image processing pipelines with
DMA engines to process and capture frames originating from a variety of
sources. The inputs to the ISI go through Pixel Link interfaces, and their
number and nature is SoC-dependent. They cover both capture interfaces (MIPI
CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support.
properties:
compatible:
enum:
- fsl,imx8mn-isi
- fsl,imx8mp-isi
- fsl,imx93-isi
reg:
maxItems: 1
clocks:
items:
- description: The AXI clock
- description: The APB clock
# TODO: Check if the per-channel ipg_proc_clk clocks need to be specified
# as well, in case some SoCs have the ability to control them separately.
# This may be the case of the i.MX8[DQ]X(P)
clock-names:
items:
- const: axi
- const: apb
fsl,blk-ctrl:
$ref: /schemas/types.yaml#/definitions/phandle
description:
A phandle referencing the block control that contains the CSIS to ISI
gasket.
interrupts:
description: Processing pipeline interrupts, one per pipeline
minItems: 1
maxItems: 2
power-domains:
maxItems: 1
ports:
$ref: /schemas/graph.yaml#/properties/ports
description: |
Ports represent the Pixel Link inputs to the ISI. Their number and
assignment are model-dependent. Each port shall have a single endpoint.
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- fsl,blk-ctrl
- ports
allOf:
- if:
properties:
compatible:
contains:
enum:
- fsl,imx8mn-isi
- fsl,imx93-isi
then:
properties:
interrupts:
maxItems: 1
ports:
properties:
port@0:
description: MIPI CSI-2 RX
port@1: false
required:
- port@0
- if:
properties:
compatible:
contains:
const: fsl,imx8mp-isi
then:
properties:
interrupts:
maxItems: 2
ports:
properties:
port@0:
description: MIPI CSI-2 RX 0
port@1:
description: MIPI CSI-2 RX 1
required:
- port@0
- port@1
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/imx8mn-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/power/imx8mn-power.h>
isi@32e20000 {
compatible = "fsl,imx8mn-isi";
reg = <0x32e20000 0x100>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
<&clk IMX8MN_CLK_DISP_APB_ROOT>;
clock-names = "axi", "apb";
fsl,blk-ctrl = <&disp_blk_ctrl>;
power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_ISI>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
isi_in: endpoint {
remote-endpoint = <&mipi_csi_out>;
};
};
};
};
- |
#include <dt-bindings/clock/imx8mp-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
isi@32e00000 {
compatible = "fsl,imx8mp-isi";
reg = <0x32e00000 0x4000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
<&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
clock-names = "axi", "apb";
fsl,blk-ctrl = <&media_blk_ctrl>;
power-domains = <&mediamix_pd>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
isi_in_0: endpoint {
remote-endpoint = <&mipi_csi_0_out>;
};
};
port@1 {
reg = <1>;
isi_in_1: endpoint {
remote-endpoint = <&mipi_csi_1_out>;
};
};
};
};
...
Codebase Browser
linux