# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/renesas,drif.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Renesas R-Car Gen3 Digital Radio Interface Controller (DRIF)
maintainers:
- Ramesh Shanmugasundaram <[email protected]>
- Fabrizio Castro <[email protected]>
description: |
R-Car Gen3 DRIF is a SPI like receive only slave device. A general
representation of DRIF interfacing with a master device is shown below.
+---------------------+ +---------------------+
| |-----SCK------->|CLK |
| Master |-----SS-------->|SYNC DRIFn (slave) |
| |-----SD0------->|D0 |
| |-----SD1------->|D1 |
+---------------------+ +---------------------+
As per datasheet, each DRIF channel (drifn) is made up of two internal
channels (drifn0 & drifn1). These two internal channels share the common
CLK & SYNC. Each internal channel has its own dedicated resources like
irq, dma channels, address space & clock. This internal split is not
visible to the external master device.
The device tree model represents each internal channel as a separate node.
The internal channels sharing the CLK & SYNC are tied together by their
phandles using a property called "renesas,bonding". For the rest of
the documentation, unless explicitly stated, the word channel implies an
internal channel.
When both internal channels are enabled they need to be managed together
as one (i.e.) they cannot operate alone as independent devices. Out of the
two, one of them needs to act as a primary device that accepts common
properties of both the internal channels. This channel is identified by a
property called "renesas,primary-bond".
To summarize,
* When both the internal channels that are bonded together are enabled,
the zeroth channel is selected as primary-bond. This channels accepts
properties common to all the members of the bond.
* When only one of the bonded channels need to be enabled, the property
"renesas,bonding" or "renesas,primary-bond" will have no effect. That
enabled channel can act alone as any other independent device.
properties:
compatible:
items:
- enum:
- renesas,r8a7795-drif # R-Car H3
- renesas,r8a7796-drif # R-Car M3-W
- renesas,r8a77965-drif # R-Car M3-N
- renesas,r8a77990-drif # R-Car E3
- const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
maxItems: 1
clock-names:
const: fck
resets:
maxItems: 1
dmas:
minItems: 1
maxItems: 2
dma-names:
minItems: 1
items:
- const: rx
- const: rx
renesas,bonding:
$ref: /schemas/types.yaml#/definitions/phandle
description:
The phandle to the other internal channel of DRIF
power-domains:
maxItems: 1
renesas,primary-bond:
type: boolean
description:
Indicates that the channel acts as primary among the bonded channels.
port:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description:
Child port node corresponding to the data input. The port node must
contain at least one endpoint.
properties:
endpoint:
$ref: /schemas/graph.yaml#/$defs/endpoint-base
unevaluatedProperties: false
properties:
sync-active:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
description:
Indicates sync signal polarity, 0/1 for low/high respectively.
This property maps to SYNCAC bit in the hardware manual. The
default is 1 (active high).
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- resets
- dmas
- dma-names
- renesas,bonding
- power-domains
allOf:
- if:
required:
- renesas,primary-bond
then:
required:
- pinctrl-0
- pinctrl-names
- port
- if:
required:
- port
then:
required:
- pinctrl-0
- pinctrl-names
else:
properties:
pinctrl-0: false
pinctrl-names: false
additionalProperties: false
examples:
# Example with both internal channels enabled.
#
# When interfacing with a third party tuner device with two data pins as shown
# below.
#
# +---------------------+ +---------------------+
# | |-----SCK------->|CLK |
# | Master |-----SS-------->|SYNC DRIFn (slave) |
# | |-----SD0------->|D0 |
# | |-----SD1------->|D1 |
# +---------------------+ +---------------------+
- |
#include <dt-bindings/clock/r8a7795-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a7795-sysc.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
drif00: rif@e6f40000 {
compatible = "renesas,r8a7795-drif",
"renesas,rcar-gen3-drif";
reg = <0 0xe6f40000 0 0x64>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 515>;
clock-names = "fck";
dmas = <&dmac1 0x20>, <&dmac2 0x20>;
dma-names = "rx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
renesas,bonding = <&drif01>;
resets = <&cpg 515>;
renesas,primary-bond;
pinctrl-0 = <&drif0_pins>;
pinctrl-names = "default";
port {
drif0_ep: endpoint {
remote-endpoint = <&tuner_ep>;
};
};
};
drif01: rif@e6f50000 {
compatible = "renesas,r8a7795-drif",
"renesas,rcar-gen3-drif";
reg = <0 0xe6f50000 0 0x64>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 514>;
clock-names = "fck";
dmas = <&dmac1 0x22>, <&dmac2 0x22>;
dma-names = "rx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
renesas,bonding = <&drif00>;
resets = <&cpg 514>;
};
};
# Example with internal channel 1 alone enabled.
#
# When interfacing with a third party tuner device with one data pin as shown
# below.
#
# +---------------------+ +---------------------+
# | |-----SCK------->|CLK |
# | Master |-----SS-------->|SYNC DRIFn (slave) |
# | | |D0 (unused) |
# | |-----SD-------->|D1 |
# +---------------------+ +---------------------+
- |
#include <dt-bindings/clock/r8a7795-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a7795-sysc.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
drif10: rif@e6f60000 {
compatible = "renesas,r8a7795-drif",
"renesas,rcar-gen3-drif";
reg = <0 0xe6f60000 0 0x64>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 513>;
clock-names = "fck";
dmas = <&dmac1 0x24>, <&dmac2 0x24>;
dma-names = "rx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 513>;
renesas,bonding = <&drif11>;
};
drif11: rif@e6f70000 {
compatible = "renesas,r8a7795-drif",
"renesas,rcar-gen3-drif";
reg = <0 0xe6f70000 0 0x64>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 512>;
clock-names = "fck";
dmas = <&dmac1 0x26>, <&dmac2 0x26>;
dma-names = "rx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 512>;
renesas,bonding = <&drif10>;
pinctrl-0 = <&drif1_pins>;
pinctrl-names = "default";
port {
drif1_ep: endpoint {
remote-endpoint = <&tuner_ep1>;
sync-active = <0>;
};
};
};
};
...
Codebase Browser
linux