# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
name: dpll
doc: DPLL subsystem.
definitions:
-
type: enum
name: mode
doc: |
working modes a dpll can support, differentiates if and how dpll selects
one of its inputs to syntonize with it, valid values for DPLL_A_MODE
attribute
entries:
-
name: manual
doc: input can be only selected by sending a request to dpll
value: 1
-
name: automatic
doc: highest prio input pin auto selected by dpll
render-max: true
-
type: enum
name: lock-status
doc: |
provides information of dpll device lock status, valid values for
DPLL_A_LOCK_STATUS attribute
entries:
-
name: unlocked
doc: |
dpll was not yet locked to any valid input (or forced by setting
DPLL_A_MODE to DPLL_MODE_DETACHED)
value: 1
-
name: locked
doc: |
dpll is locked to a valid signal, but no holdover available
-
name: locked-ho-acq
doc: |
dpll is locked and holdover acquired
-
name: holdover
doc: |
dpll is in holdover state - lost a valid lock or was forced
by disconnecting all the pins (latter possible only
when dpll lock-state was already DPLL_LOCK_STATUS_LOCKED_HO_ACQ,
if dpll lock-state was not DPLL_LOCK_STATUS_LOCKED_HO_ACQ, the
dpll's lock-state shall remain DPLL_LOCK_STATUS_UNLOCKED)
render-max: true
-
type: enum
name: lock-status-error
doc: |
if previous status change was done due to a failure, this provides
information of dpll device lock status error.
Valid values for DPLL_A_LOCK_STATUS_ERROR attribute
entries:
-
name: none
doc: |
dpll device lock status was changed without any error
value: 1
-
name: undefined
doc: |
dpll device lock status was changed due to undefined error.
Driver fills this value up in case it is not able
to obtain suitable exact error type.
-
name: media-down
doc: |
dpll device lock status was changed because of associated
media got down.
This may happen for example if dpll device was previously
locked on an input pin of type PIN_TYPE_SYNCE_ETH_PORT.
-
name: fractional-frequency-offset-too-high
doc: |
the FFO (Fractional Frequency Offset) between the RX and TX
symbol rate on the media got too high.
This may happen for example if dpll device was previously
locked on an input pin of type PIN_TYPE_SYNCE_ETH_PORT.
render-max: true
-
type: const
name: temp-divider
value: 1000
doc: |
temperature divider allowing userspace to calculate the
temperature as float with three digit decimal precision.
Value of (DPLL_A_TEMP / DPLL_TEMP_DIVIDER) is integer part of
temperature value.
Value of (DPLL_A_TEMP % DPLL_TEMP_DIVIDER) is fractional part of
temperature value.
-
type: enum
name: type
doc: type of dpll, valid values for DPLL_A_TYPE attribute
entries:
-
name: pps
doc: dpll produces Pulse-Per-Second signal
value: 1
-
name: eec
doc: dpll drives the Ethernet Equipment Clock
render-max: true
-
type: enum
name: pin-type
doc: |
defines possible types of a pin, valid values for DPLL_A_PIN_TYPE
attribute
entries:
-
name: mux
doc: aggregates another layer of selectable pins
value: 1
-
name: ext
doc: external input
-
name: synce-eth-port
doc: ethernet port PHY's recovered clock
-
name: int-oscillator
doc: device internal oscillator
-
name: gnss
doc: GNSS recovered clock
render-max: true
-
type: enum
name: pin-direction
doc: |
defines possible direction of a pin, valid values for
DPLL_A_PIN_DIRECTION attribute
entries:
-
name: input
doc: pin used as a input of a signal
value: 1
-
name: output
doc: pin used to output the signal
render-max: true
-
type: const
name: pin-frequency-1-hz
value: 1
-
type: const
name: pin-frequency-10-khz
value: 10000
-
type: const
name: pin-frequency-77_5-khz
value: 77500
-
type: const
name: pin-frequency-10-mhz
value: 10000000
-
type: enum
name: pin-state
doc: |
defines possible states of a pin, valid values for
DPLL_A_PIN_STATE attribute
entries:
-
name: connected
doc: pin connected, active input of phase locked loop
value: 1
-
name: disconnected
doc: pin disconnected, not considered as a valid input
-
name: selectable
doc: pin enabled for automatic input selection
render-max: true
-
type: flags
name: pin-capabilities
doc: |
defines possible capabilities of a pin, valid flags on
DPLL_A_PIN_CAPABILITIES attribute
entries:
-
name: direction-can-change
doc: pin direction can be changed
-
name: priority-can-change
doc: pin priority can be changed
-
name: state-can-change
doc: pin state can be changed
-
type: const
name: phase-offset-divider
value: 1000
doc: |
phase offset divider allows userspace to calculate a value of
measured signal phase difference between a pin and dpll device
as a fractional value with three digit decimal precision.
Value of (DPLL_A_PHASE_OFFSET / DPLL_PHASE_OFFSET_DIVIDER) is an
integer part of a measured phase offset value.
Value of (DPLL_A_PHASE_OFFSET % DPLL_PHASE_OFFSET_DIVIDER) is a
fractional part of a measured phase offset value.
attribute-sets:
-
name: dpll
enum-name: dpll_a
attributes:
-
name: id
type: u32
-
name: module-name
type: string
-
name: pad
type: pad
-
name: clock-id
type: u64
-
name: mode
type: u32
enum: mode
-
name: mode-supported
type: u32
enum: mode
multi-attr: true
-
name: lock-status
type: u32
enum: lock-status
-
name: temp
type: s32
-
name: type
type: u32
enum: type
-
name: lock-status-error
type: u32
enum: lock-status-error
-
name: pin
enum-name: dpll_a_pin
attributes:
-
name: id
type: u32
-
name: parent-id
type: u32
-
name: module-name
type: string
-
name: pad
type: pad
-
name: clock-id
type: u64
-
name: board-label
type: string
-
name: panel-label
type: string
-
name: package-label
type: string
-
name: type
type: u32
enum: pin-type
-
name: direction
type: u32
enum: pin-direction
-
name: frequency
type: u64
-
name: frequency-supported
type: nest
multi-attr: true
nested-attributes: frequency-range
-
name: frequency-min
type: u64
-
name: frequency-max
type: u64
-
name: prio
type: u32
-
name: state
type: u32
enum: pin-state
-
name: capabilities
type: u32
enum: pin-capabilities
-
name: parent-device
type: nest
multi-attr: true
nested-attributes: pin-parent-device
-
name: parent-pin
type: nest
multi-attr: true
nested-attributes: pin-parent-pin
-
name: phase-adjust-min
type: s32
-
name: phase-adjust-max
type: s32
-
name: phase-adjust
type: s32
-
name: phase-offset
type: s64
-
name: fractional-frequency-offset
type: sint
doc: |
The FFO (Fractional Frequency Offset) between the RX and TX
symbol rate on the media associated with the pin:
(rx_frequency-tx_frequency)/rx_frequency
Value is in PPM (parts per million).
This may be implemented for example for pin of type
PIN_TYPE_SYNCE_ETH_PORT.
-
name: pin-parent-device
subset-of: pin
attributes:
-
name: parent-id
-
name: direction
-
name: prio
-
name: state
-
name: phase-offset
-
name: pin-parent-pin
subset-of: pin
attributes:
-
name: parent-id
-
name: state
-
name: frequency-range
subset-of: pin
attributes:
-
name: frequency-min
-
name: frequency-max
operations:
enum-name: dpll_cmd
list:
-
name: device-id-get
doc: |
Get id of dpll device that matches given attributes
attribute-set: dpll
flags: [ admin-perm ]
do:
pre: dpll-lock-doit
post: dpll-unlock-doit
request:
attributes:
- module-name
- clock-id
- type
reply:
attributes:
- id
-
name: device-get
doc: |
Get list of DPLL devices (dump) or attributes of a single dpll device
attribute-set: dpll
flags: [ admin-perm ]
do:
pre: dpll-pre-doit
post: dpll-post-doit
request:
attributes:
- id
reply: &dev-attrs
attributes:
- id
- module-name
- mode
- mode-supported
- lock-status
- lock-status-error
- temp
- clock-id
- type
dump:
reply: *dev-attrs
-
name: device-set
doc: Set attributes for a DPLL device
attribute-set: dpll
flags: [ admin-perm ]
do:
pre: dpll-pre-doit
post: dpll-post-doit
request:
attributes:
- id
-
name: device-create-ntf
doc: Notification about device appearing
notify: device-get
mcgrp: monitor
-
name: device-delete-ntf
doc: Notification about device disappearing
notify: device-get
mcgrp: monitor
-
name: device-change-ntf
doc: Notification about device configuration being changed
notify: device-get
mcgrp: monitor
-
name: pin-id-get
doc: |
Get id of a pin that matches given attributes
attribute-set: pin
flags: [ admin-perm ]
do:
pre: dpll-lock-doit
post: dpll-unlock-doit
request:
attributes:
- module-name
- clock-id
- board-label
- panel-label
- package-label
- type
reply:
attributes:
- id
-
name: pin-get
doc: |
Get list of pins and its attributes.
- dump request without any attributes given - list all the pins in the
system
- dump request with target dpll - list all the pins registered with
a given dpll device
- do request with target dpll and target pin - single pin attributes
attribute-set: pin
flags: [ admin-perm ]
do:
pre: dpll-pin-pre-doit
post: dpll-pin-post-doit
request:
attributes:
- id
reply: &pin-attrs
attributes:
- id
- board-label
- panel-label
- package-label
- type
- frequency
- frequency-supported
- capabilities
- parent-device
- parent-pin
- phase-adjust-min
- phase-adjust-max
- phase-adjust
- fractional-frequency-offset
dump:
request:
attributes:
- id
reply: *pin-attrs
-
name: pin-set
doc: Set attributes of a target pin
attribute-set: pin
flags: [ admin-perm ]
do:
pre: dpll-pin-pre-doit
post: dpll-pin-post-doit
request:
attributes:
- id
- frequency
- direction
- prio
- state
- parent-device
- parent-pin
- phase-adjust
-
name: pin-create-ntf
doc: Notification about pin appearing
notify: pin-get
mcgrp: monitor
-
name: pin-delete-ntf
doc: Notification about pin disappearing
notify: pin-get
mcgrp: monitor
-
name: pin-change-ntf
doc: Notification about pin configuration being changed
notify: pin-get
mcgrp: monitor
mcast-groups:
list:
-
name: monitor
Codebase Browser
linux