// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974.dtsi"
#include "pm8841.dtsi"
#include "pm8941.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "Samsung Galaxy Note 3";
compatible = "samsung,hlte", "qcom,msm8974";
chassis-type = "handset";
aliases {
mmc0 = &sdhc_1; /* SDC1 eMMC slot */
mmc1 = &sdhc_3; /* SDC3 SD card slot */
serial0 = &blsp1_uart1;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&gpio_keys_pin_a>;
pinctrl-names = "default";
key-home {
label = "Home Key";
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOMEPAGE>;
wakeup-source;
debounce-interval = <15>;
};
key-volume-down {
label = "Volume Down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <15>;
};
key-volume-up {
label = "Volume Up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <15>;
};
};
touch_ldo: regulator-touch {
compatible = "regulator-fixed";
regulator-name = "touch-ldo";
gpio = <&pm8941_gpios 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
pinctrl-0 = <&touch_ldo_pin>;
pinctrl-names = "default";
};
};
&blsp1_i2c2 {
status = "okay";
touchscreen@20 {
compatible = "syna,rmi4-i2c";
reg = <0x20>;
interrupt-parent = <&pm8941_gpios>;
interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&pm8941_l10>;
vio-supply = <&touch_ldo>;
pinctrl-0 = <&touch_pin>;
pinctrl-names = "default";
syna,startup-delay-ms = <100>;
#address-cells = <1>;
#size-cells = <0>;
rmi4-f01@1 {
reg = <0x1>;
syna,nosleep-mode = <1>;
};
rmi4-f12@12 {
reg = <0x12>;
syna,sensor-type = <1>;
};
};
};
&blsp2_i2c6 {
status = "okay";
fuelgauge@36 {
compatible = "maxim,max17048";
reg = <0x36>;
maxim,double-soc;
maxim,rcomp = /bits/ 8 <0x56>;
interrupt-parent = <&pm8941_gpios>;
interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
pinctrl-0 = <&fuelgauge_pin>;
pinctrl-names = "default";
};
};
&blsp1_uart2 {
status = "okay";
};
&pm8941_gpios {
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio2", "gpio3", "gpio5";
function = "normal";
bias-pull-up;
power-source = <PM8941_GPIO_S3>;
};
fuelgauge_pin: fuelgauge-int-state {
pins = "gpio26";
function = "normal";
bias-disable;
input-enable;
power-source = <PM8941_GPIO_S3>;
};
touch_pin: touchscreen-int-state {
pins = "gpio30";
function = "normal";
bias-disable;
input-enable;
power-source = <PM8941_GPIO_S3>;
};
touch_ldo_pin: touchscreen-ldo-state {
pins = "gpio9";
function = "normal";
output-high;
power-source = <PM8941_GPIO_S3>;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
};
};
&remoteproc_adsp {
cx-supply = <&pm8841_s2>;
status = "okay";
};
&remoteproc_mss {
cx-supply = <&pm8841_s2>;
mss-supply = <&pm8841_s3>;
mx-supply = <&pm8841_s1>;
pll-supply = <&pm8941_l12>;
status = "okay";
};
&rpm_requests {
regulators-0 {
compatible = "qcom,rpm-pm8841-regulators";
pm8841_s1: s1 {
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <1050000>;
};
pm8841_s2: s2 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1050000>;
};
pm8841_s3: s3 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
pm8841_s4: s4 {
regulator-min-microvolt = <815000>;
regulator-max-microvolt = <900000>;
};
};
regulators-1 {
compatible = "qcom,rpm-pm8941-regulators";
pm8941_s1: s1 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
};
pm8941_s2: s2 {
regulator-min-microvolt = <2150000>;
regulator-max-microvolt = <2150000>;
};
pm8941_s3: s3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8941_l1: l1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8941_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8941_l3: l3 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1225000>;
};
pm8941_l4: l4 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
pm8941_l5: l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8941_l6: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8941_l7: l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8941_l8: l8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8941_l9: l9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pm8941_l10: l10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8941_l11: l11 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1350000>;
};
pm8941_l12: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
pm8941_l13: l13 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
pm8941_l14: l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8941_l15: l15 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
pm8941_l16: l16 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
pm8941_l17: l17 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <3000000>;
};
pm8941_l18: l18 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
pm8941_l19: l19 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <3350000>;
};
pm8941_l20: l20 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-system-load = <200000>;
regulator-allow-set-load;
};
pm8941_l21: l21 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-system-load = <200000>;
regulator-allow-set-load;
};
pm8941_l22: l22 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <3000000>;
};
pm8941_l23: l23 {
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <3300000>;
};
pm8941_l24: l24 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
};
};
&sdhc_1 {
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
pinctrl-0 = <&sdhc1_pin_a>;
pinctrl-names = "default";
status = "okay";
};
&sdhc_3 {
max-frequency = <100000000>;
vmmc-supply = <&pm8941_l21>;
vqmmc-supply = <&pm8941_l21>;
pinctrl-0 = <&sdhc3_pin_a>;
pinctrl-names = "default";
status = "okay";
};
&tlmm {
sdhc1_pin_a: sdhc1-pin-active-state {
clk-pins {
pins = "sdc1_clk";
drive-strength = <4>;
bias-disable;
};
cmd-data-pins {
pins = "sdc1_cmd", "sdc1_data";
drive-strength = <4>;
bias-pull-up;
};
};
sdhc3_pin_a: sdhc3-pin-active-state {
pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
function = "sdc3";
drive-strength = <8>;
bias-disable;
};
};
&usb {
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
hnp-disable;
srp-disable;
adp-disable;
status = "okay";
};
&usb_hs1_phy {
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
status = "okay";
};
Codebase Browser
linux