// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2024 Josua Mayer <[email protected]>
*
*/
#include <dt-bindings/gpio/gpio.h>
/*
* Instantiate the first external CP115
*/
#define CP11X_NAME cp1
#define CP11X_BASE f4000000
#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
#define CP11X_PCIE0_BASE f4600000
#define CP11X_PCIE1_BASE f4620000
#define CP11X_PCIE2_BASE f4640000
#include "armada-cp115.dtsi"
#undef CP11X_NAME
#undef CP11X_BASE
#undef CP11X_PCIEx_MEM_BASE
#undef CP11X_PCIEx_MEM_SIZE
#undef CP11X_PCIE0_BASE
#undef CP11X_PCIE1_BASE
#undef CP11X_PCIE2_BASE
/*
* Instantiate the second external CP115
*/
#define CP11X_NAME cp2
#define CP11X_BASE f6000000
#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
#define CP11X_PCIE0_BASE f6600000
#define CP11X_PCIE1_BASE f6620000
#define CP11X_PCIE2_BASE f6640000
#include "armada-cp115.dtsi"
#undef CP11X_NAME
#undef CP11X_BASE
#undef CP11X_PCIEx_MEM_BASE
#undef CP11X_PCIEx_MEM_SIZE
#undef CP11X_PCIE0_BASE
#undef CP11X_PCIE1_BASE
#undef CP11X_PCIE2_BASE
/ {
model = "SolidRun CN9132 COM Express Type 7 Module";
compatible = "solidrun,cn9132-sr-cex7", "marvell,cn9130";
aliases {
ethernet0 = &cp0_eth1;
gpio3 = &cp1_gpio1;
gpio4 = &cp1_gpio2;
gpio5 = &cp2_gpio1;
gpio6 = &cp2_gpio2;
i2c0 = &cp0_i2c0;
i2c1 = &cp0_i2c1;
i2c2 = &com_clkgen_i2c;
i2c3 = &com_10g_led_i2c;
i2c4 = &com_10g_sfp_i2c0;
i2c5 = &com_smbus;
i2c6 = &com_fanctrl_i2c;
mmc0 = &ap_sdhci0;
rtc0 = &cp0_rtc;
};
chosen {
stdout-path = "serial0:115200n8";
};
fan: pwm-fan {
compatible = "pwm-fan";
cooling-levels = <0 51 102 153 204 255>;
#cooling-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_fan_pwm_pins &cp0_fan_tacho_pins>;
pwms = <&cp0_gpio2 7 40000>;
interrupt-parent = <&cp0_gpio1>;
interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
};
v_1_8: regulator-1-8 {
compatible = "regulator-fixed";
regulator-name = "1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ap_vhv: regulator-ap-vhv-1-8 {
compatible = "regulator-fixed";
regulator-name = "ap-vhv-1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
pinctrl-0 = <&cp0_reg_ap_vhv_pins>;
pinctrl-names = "default";
gpios = <&cp0_gpio2 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
cp_vhv: regulator-cp-vhv-1-8 {
compatible = "regulator-fixed";
regulator-name = "cp-vhv-1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
pinctrl-0 = <&cp0_reg_cp_vhv_pins>;
pinctrl-names = "default";
gpios = <&cp0_gpio2 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&ap_pinctrl {
ap_mmc0_pins: ap-mmc0-pins {
marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5",
"mpp6", "mpp7", "mpp8", "mpp9", "mpp10", "mpp12";
marvell,function = "sdio";
/*
* mpp12 is emmc reset, function should be sdio (hw_rst),
* but pinctrl-mvebu does not support this.
*
* From pinctrl-mvebu.h:
* "The name will be used to switch to this setting in DT description, e.g.
* marvell,function = "uart2". subname is only for debugging purposes."
*/
};
};
&ap_sdhci0 {
bus-width = <8>;
pinctrl-0 = <&ap_mmc0_pins>;
pinctrl-names = "default";
vqmmc-supply = <&v_1_8>;
status = "okay";
};
&ap_thermal_ic {
polling-delay = <1000>;
trips {
ap_active: trip-active {
temperature = <40000>;
hysteresis = <4000>;
type = "active";
};
};
cooling-maps {
map0 {
trip = <&ap_active>;
cooling-device = <&fan THERMAL_NO_LIMIT 4>;
};
map1 {
trip = <&ap_crit>;
cooling-device = <&fan 4 5>;
};
};
};
&cp0_ethernet {
status = "okay";
};
&cp0_eth1 {
pinctrl-names = "default";
pinctrl-0 = <&cp0_eth1_pins>;
phy-mode = "rgmii-id";
phy = <&cp0_eth_phy0>;
status = "okay";
};
&cp0_gpio1 {
status = "okay";
/*
* Tacho signal used as interrupt source by pwm-fan driver.
* Hog IO as input to ensure mvebu-gpio irq driver`s
* irq_set_type can succeed.
*/
pwm-tacho-irq-hog {
gpio-hog;
gpios = <26 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
input;
line-name = "fan-tacho";
};
};
&cp0_gpio2 {
status = "okay";
};
&cp0_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&cp0_i2c0_pins>;
clock-frequency = <100000>;
status = "okay";
com_eeprom: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <8>;
};
eeprom@53 {
compatible = "atmel,spd";
reg = <0x53>;
};
};
&cp0_i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&cp0_i2c1_pins>;
clock-frequency = <100000>;
status = "okay";
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
i2c-mux-idle-disconnect;
#address-cells = <1>;
#size-cells = <0>;
com_clkgen_i2c: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
/* clock-controller@6b */
};
com_10g_led_i2c: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
/* Routed to B2B Connector as I2C_10G_LED_SCL/SDA */
};
com_10g_sfp_i2c0: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
/* Routed to B2B Connector as I2C_SFP0_CP0_SCL/SDA */
};
com_smbus: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
/* Routed to B2B Connector as SBM_CLK/DAT */
};
com_fanctrl_i2c: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
/* fan-controller@2f (assembly option) */
};
};
};
&cp0_mdio {
pinctrl-names = "default";
pinctrl-0 = <&cp0_mdio_pins>;
status = "okay";
cp0_eth_phy0: ethernet-phy@0 {
reg = <0>;
};
};
&cp0_spi1 {
pinctrl-names = "default";
pinctrl-0 = <&cp0_spi1_pins>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
/* read command supports max. 50MHz */
spi-max-frequency = <50000000>;
};
};
&cp0_syscon0 {
cp0_pinctrl: pinctrl {
compatible = "marvell,cp115-standalone-pinctrl";
com_10g_int0_pins: cp0-10g-int-pins {
marvell,pins = "mpp24";
marvell,function = "gpio";
};
cp0_eth1_pins: cp0-eth1-pins {
marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
"mpp4", "mpp5", "mpp6", "mpp7",
"mpp8", "mpp9", "mpp10", "mpp11";
/* docs call it "ge1", but cp110-pinctrl "ge0" */
marvell,function = "ge0";
};
cp0_fan_pwm_pins: cp0-fan-pwm-pins {
marvell,pins = "mpp39";
marvell,function = "gpio";
};
cp0_fan_tacho_pins: cp0-fan-tacho-pins {
marvell,pins = "mpp26";
marvell,function = "gpio";
};
cp0_i2c0_pins: cp0-i2c0-pins {
marvell,pins = "mpp37", "mpp38";
marvell,function = "i2c0";
};
cp0_i2c1_pins: cp0-i2c1-pins {
marvell,pins = "mpp35", "mpp36";
marvell,function = "i2c1";
};
cp0_mdio_pins: cp0-mdio-pins {
marvell,pins = "mpp40", "mpp41";
marvell,function = "ge";
};
cp0_mmc0_pins: cp0-mmc0-pins {
marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59",
"mpp60", "mpp61";
marvell,function = "sdio";
};
cp0_mmc0_cd_pins: cp0-mmc0-cd-pins {
marvell,pins = "mpp55";
marvell,function = "sdio_cd";
};
cp0_pwrbtn_pins: cp0-pwrbtn-pins {
marvell,pins = "mpp31";
marvell,function = "gpio";
};
cp0_reg_ap_vhv_pins: cp0-reg-ap-vhv-pins {
marvell,pins = "mpp53";
marvell,function = "gpio";
};
cp0_reg_cp_vhv_pins: cp0-reg-cp-vhv-pins {
marvell,pins = "mpp49";
marvell,function = "gpio";
};
cp0_spi1_pins: cp0-spi1-pins {
marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
marvell,function = "spi1";
};
cp0_spi1_cs1_pins: cp0-spi1-cs1-pins {
marvell,pins = "mpp12";
marvell,function = "spi1";
};
cp0_uart2_pins: cp0-uart2-pins {
marvell,pins = "mpp50", "mpp51";
marvell,function = "uart2";
};
};
};
&cp0_thermal_ic {
polling-delay = <1000>;
trips {
cp0_active: trip-active {
temperature = <40000>;
hysteresis = <4000>;
type = "active";
};
};
cooling-maps {
map0 {
trip = <&cp0_active>;
cooling-device = <&fan THERMAL_NO_LIMIT 4>;
};
map1 {
trip = <&cp0_crit>;
cooling-device = <&fan 4 5>;
};
};
};
/* USB-2.0 Host */
&cp0_usb3_0 {
phys = <&cp0_utmi0>;
phy-names = "utmi";
dr_mode = "host";
status = "okay";
};
/* USB-2.0 Host */
&cp0_usb3_1 {
phys = <&cp0_utmi1>;
phy-names = "utmi";
dr_mode = "host";
status = "okay";
};
&cp0_utmi {
status = "okay";
};
&cp1_gpio1 {
status = "okay";
};
&cp1_gpio2 {
status = "okay";
};
&cp1_rtc {
status = "disabled";
};
&cp1_spi1 {
pinctrl-names = "default";
pinctrl-0 = <&cp1_spi1_pins>;
status = "okay";
tpm@0 {
reg = <0>;
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
spi-max-frequency = <10000000>;
pinctrl-names = "default";
pinctrl-0 = <&cp1_tpm_irq_pins>;
interrupt-parent = <&cp1_gpio1>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
};
};
&cp1_syscon0 {
cp1_pinctrl: pinctrl {
compatible = "marvell,cp115-standalone-pinctrl";
com_10g_int1_pins: cp1-10g-int-pins {
marvell,pins = "mpp50";
marvell,function = "gpio";
};
cp1_10g_phy_rst_01_pins: cp1-10g-phy-rst-01-pins {
marvell,pins = "mpp43";
marvell,function = "gpio";
};
cp1_10g_phy_rst_23_pins: cp1-10g-phy-rst-23-pins {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
cp1_batlow_pins: cp1-batlow-pins {
marvell,pins = "mpp11";
marvell,function = "gpio";
};
cp1_rsvd16_pins: cp1-rsvd16-pins {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
cp1_sata_act_pins: cp1-sata-act-pins {
marvell,pins = "mpp39";
marvell,function = "gpio";
};
cp1_spi1_pins: cp1-spi1-pins {
marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
marvell,function = "spi1";
};
cp1_thrm_irq_pins: cp1-thrm-irq-pins {
marvell,pins = "mpp34";
marvell,function = "gpio";
};
cp1_thrm_trip_pins: cp1-thrm-trip-pins {
marvell,pins = "mpp33";
marvell,function = "gpio";
};
cp1_tpm_irq_pins: cp1-tpm-irq-pins {
marvell,pins = "mpp17";
marvell,function = "gpio";
};
cp1_wake0_pins: cp1-wake0-pins {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
cp1_wake1_pins: cp1-wake1-pins {
marvell,pins = "mpp51";
marvell,function = "gpio";
};
cp1_xmdio_pins: cp1-xmdio-pins {
marvell,pins = "mpp37", "mpp38";
marvell,function = "xg";
};
};
};
&cp1_thermal_ic {
polling-delay = <1000>;
trips {
cp1_active: trip-active {
temperature = <40000>;
hysteresis = <4000>;
type = "active";
};
};
cooling-maps {
map0 {
trip = <&cp1_active>;
cooling-device = <&fan THERMAL_NO_LIMIT 4>;
};
map1 {
trip = <&cp1_crit>;
cooling-device = <&fan 4 5>;
};
};
};
/* USB-2.0 Host */
&cp1_usb3_0 {
phys = <&cp1_utmi0>;
phy-names = "utmi";
dr_mode = "host";
status = "okay";
};
&cp1_utmi {
status = "okay";
};
&cp2_ethernet {
status = "okay";
};
&cp2_gpio1 {
status = "okay";
};
&cp2_gpio2 {
status = "okay";
};
&cp2_rtc {
status = "disabled";
};
&cp2_syscon0 {
cp2_pinctrl: pinctrl {
compatible = "marvell,cp115-standalone-pinctrl";
com_10g_int2_pins: cp2-10g-int-pins {
marvell,pins = "mpp50";
marvell,function = "gpio";
};
cp2_rsvd0_pins: cp2-rsvd0-pins {
marvell,pins = "mpp0";
marvell,function = "gpio";
};
cp2_rsvd1_pins: cp2-rsvd1-pins {
marvell,pins = "mpp1";
marvell,function = "gpio";
};
cp2_rsvd2_pins: cp2-rsvd2-pins {
marvell,pins = "mpp2";
marvell,function = "gpio";
};
cp2_rsvd3_pins: cp2-rsvd3-pins {
marvell,pins = "mpp3";
marvell,function = "gpio";
};
cp2_rsvd4_pins: cp2-rsvd4-pins {
marvell,pins = "mpp4";
marvell,function = "gpio";
};
cp2_rsvd5_pins: cp2-rsvd5-pins {
marvell,pins = "mpp54";
marvell,function = "gpio";
};
cp2_rsvd7_pins: cp2-rsvd7-pins {
marvell,pins = "mpp7";
marvell,function = "gpio";
};
cp2_rsvd8_pins: cp2-rsvd8-pins {
marvell,pins = "mpp8";
marvell,function = "gpio";
};
cp2_rsvd9_pins: cp2-rsvd9-pins {
marvell,pins = "mpp9";
marvell,function = "gpio";
};
cp2_rsvd10_pins: cp2-rsvd10-pins {
marvell,pins = "mpp10";
marvell,function = "gpio";
};
cp2_rsvd11_pins: cp2-rsvd11-pins {
marvell,pins = "mpp11";
marvell,function = "gpio";
};
cp2_rsvd27_pins: cp2-rsvd27-pins {
marvell,pins = "mpp11";
marvell,function = "gpio";
};
cp2_rsvd31_pins: cp2-rsvd31-pins {
marvell,pins = "mpp31";
marvell,function = "gpio";
};
cp2_rsvd32_pins: cp2-rsvd32-pins {
marvell,pins = "mpp32";
marvell,function = "gpio";
};
cp2_rsvd55_pins: cp2-rsvd55-pins {
marvell,pins = "mpp55";
marvell,function = "gpio";
};
cp2_rsvd56_pins: cp2-rsvd56-pins {
marvell,pins = "mpp56";
marvell,function = "gpio";
};
cp2_xmdio_pins: cp2-xmdio-pins {
marvell,pins = "mpp37", "mpp38";
marvell,function = "xg";
};
};
};
&cp2_thermal_ic {
polling-delay = <1000>;
trips {
cp2_active: trip-active {
temperature = <40000>;
hysteresis = <4000>;
type = "active";
};
};
cooling-maps {
map0 {
trip = <&cp2_active>;
cooling-device = <&fan THERMAL_NO_LIMIT 4>;
};
map1 {
trip = <&cp2_crit>;
cooling-device = <&fan 4 5>;
};
};
};
/* USB-2.0/3.0 Host */
&cp2_usb3_0 {
phys = <&cp2_utmi0>, <&cp2_comphy1 0>;
phy-names = "utmi", "comphy";
dr_mode = "host";
status = "okay";
};
&cp2_utmi {
status = "okay";
};
/* AP default console */
&uart0 {
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
status = "okay";
};
Codebase Browser
linux