// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* Device Tree file for the J722S MAIN domain peripherals
*
* Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
#include <dt-bindings/phy/phy-cadence.h>
#include <dt-bindings/phy/phy-ti.h>
/ {
serdes_refclk: clk-0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
};
&cbass_main {
serdes_wiz0: phy@f000000 {
compatible = "ti,am64-wiz-10g";
ranges = <0x0f000000 0x0 0x0f000000 0x00010000>;
#address-cells = <1>;
#size-cells = <1>;
power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 279 0>, <&k3_clks 279 1>, <&serdes_refclk>;
clock-names = "fck", "core_ref_clk", "ext_ref_clk";
num-lanes = <1>;
#reset-cells = <1>;
#clock-cells = <1>;
assigned-clocks = <&k3_clks 279 1>;
assigned-clock-parents = <&k3_clks 279 5>;
serdes0: serdes@f000000 {
compatible = "ti,j721e-serdes-10g";
reg = <0x0f000000 0x00010000>;
reg-names = "torrent_phy";
resets = <&serdes_wiz0 0>;
reset-names = "torrent_reset";
clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
<&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
clock-names = "refclk", "phy_en_refclk";
assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
<&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
<&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
assigned-clock-parents = <&k3_clks 279 1>,
<&k3_clks 279 1>,
<&k3_clks 279 1>;
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <1>;
status = "disabled"; /* Needs lane config */
};
};
serdes_wiz1: phy@f010000 {
compatible = "ti,am64-wiz-10g";
ranges = <0x0f010000 0x0 0x0f010000 0x00010000>;
#address-cells = <1>;
#size-cells = <1>;
power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 280 0>, <&k3_clks 280 1>, <&serdes_refclk>;
clock-names = "fck", "core_ref_clk", "ext_ref_clk";
num-lanes = <1>;
#reset-cells = <1>;
#clock-cells = <1>;
assigned-clocks = <&k3_clks 280 1>;
assigned-clock-parents = <&k3_clks 280 5>;
serdes1: serdes@f010000 {
compatible = "ti,j721e-serdes-10g";
reg = <0x0f010000 0x00010000>;
reg-names = "torrent_phy";
resets = <&serdes_wiz1 0>;
reset-names = "torrent_reset";
clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>,
<&serdes_wiz1 TI_WIZ_PHY_EN_REFCLK>;
clock-names = "refclk", "phy_en_refclk";
assigned-clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>,
<&serdes_wiz1 TI_WIZ_PLL1_REFCLK>,
<&serdes_wiz1 TI_WIZ_REFCLK_DIG>;
assigned-clock-parents = <&k3_clks 280 1>,
<&k3_clks 280 1>,
<&k3_clks 280 1>;
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <1>;
status = "disabled"; /* Needs lane config */
};
};
pcie0_rc: pcie@f102000 {
compatible = "ti,j722s-pcie-host", "ti,j721e-pcie-host";
reg = <0x00 0x0f102000 0x00 0x1000>,
<0x00 0x0f100000 0x00 0x400>,
<0x00 0x0d000000 0x00 0x00800000>,
<0x00 0x68000000 0x00 0x00001000>;
reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
ranges = <0x01000000 0x00 0x68001000 0x00 0x68001000 0x00 0x0010000>,
<0x02000000 0x00 0x68011000 0x00 0x68011000 0x00 0x7fef000>;
dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
interrupt-names = "link_state";
interrupts = <GIC_SPI 99 IRQ_TYPE_EDGE_RISING>;
device_type = "pci";
max-link-speed = <3>;
num-lanes = <1>;
power-domains = <&k3_pds 259 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 259 0>, <&serdes1 CDNS_TORRENT_REFCLK_DRIVER>;
clock-names = "fck", "pcie_refclk";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x0 0xff>;
vendor-id = <0x104c>;
device-id = <0xb010>;
cdns,no-bar-match-nbits = <64>;
ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
msi-map = <0x0 &gic_its 0x0 0x10000>;
status = "disabled";
};
usbss1: usb@f920000 {
compatible = "ti,j721e-usb";
reg = <0x00 0x0f920000 0x00 0x100>;
power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 278 3>, <&k3_clks 278 1>;
clock-names = "ref", "lpm";
assigned-clocks = <&k3_clks 278 3>; /* USB2_REFCLK */
assigned-clock-parents = <&k3_clks 278 4>; /* HF0SC0 */
#address-cells = <2>;
#size-cells = <2>;
ranges;
status = "disabled";
usb1: usb@31200000{
compatible = "cdns,usb3";
reg = <0x00 0x31200000 0x00 0x10000>,
<0x00 0x31210000 0x00 0x10000>,
<0x00 0x31220000 0x00 0x10000>;
reg-names = "otg",
"xhci",
"dev";
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
<GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; /* otgirq */
interrupt-names = "host",
"peripheral",
"otg";
maximum-speed = "super-speed";
dr_mode = "otg";
};
};
};
&main_conf {
serdes_ln_ctrl: mux-controller@4080 {
compatible = "reg-mux";
reg = <0x4080 0x14>;
#mux-control-cells = <1>;
mux-reg-masks = <0x00 0x3>, /* SERDES0 lane0 select */
<0x10 0x3>; /* SERDES1 lane0 select */
};
audio_refclk1: clock@82e4 {
compatible = "ti,am62-audio-refclk";
reg = <0x82e4 0x4>;
clocks = <&k3_clks 157 18>;
assigned-clocks = <&k3_clks 157 18>;
assigned-clock-parents = <&k3_clks 157 33>;
#clock-cells = <0>;
};
};
&wkup_conf {
pcie0_ctrl: pcie0-ctrl@4070 {
compatible = "ti,j784s4-pcie-ctrl", "syscon";
reg = <0x4070 0x4>;
};
};
&oc_sram {
reg = <0x00 0x70000000 0x00 0x40000>;
ranges = <0x00 0x00 0x70000000 0x40000>;
};
&inta_main_dmss {
ti,interrupt-ranges = <7 71 21>;
};
&main_pmx0 {
pinctrl-single,gpio-range =
<&main_pmx0_range 0 32 PIN_GPIO_RANGE_IOPAD>,
<&main_pmx0_range 33 38 PIN_GPIO_RANGE_IOPAD>,
<&main_pmx0_range 72 17 PIN_GPIO_RANGE_IOPAD>,
<&main_pmx0_range 101 25 PIN_GPIO_RANGE_IOPAD>,
<&main_pmx0_range 137 5 PIN_GPIO_RANGE_IOPAD>,
<&main_pmx0_range 143 3 PIN_GPIO_RANGE_IOPAD>,
<&main_pmx0_range 149 2 PIN_GPIO_RANGE_IOPAD>;
main_pmx0_range: gpio-range {
#pinctrl-single,gpio-range-cells = <3>;
};
};
&main_gpio0 {
gpio-ranges = <&main_pmx0 0 0 32>, <&main_pmx0 32 33 38>,
<&main_pmx0 70 72 17>;
ti,ngpio = <87>;
};
&main_gpio1 {
gpio-ranges = <&main_pmx0 7 101 25>, <&main_pmx0 42 137 5>,
<&main_pmx0 47 143 3>, <&main_pmx0 50 149 2>;
ti,ngpio = <73>;
};
Codebase Browser
linux