// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
* Copyright (c) 2024, Xilin Wu <[email protected]>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "x1e80100.dtsi"
#include "x1e80100-pmics.dtsi"
/ {
model = "ASUS Vivobook S 15";
compatible = "asus,vivobook-s15", "qcom,x1e80100";
chassis-type = "laptop";
pmic-glink {
compatible = "qcom,x1e80100-pmic-glink",
"qcom,sm8550-pmic-glink",
"qcom,pmic-glink";
orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
<&tlmm 123 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
/* Left-side port, closer to the screen */
connector@0 {
compatible = "usb-c-connector";
reg = <0>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_ss0_hs_in: endpoint {
remote-endpoint = <&usb_1_ss0_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss0_ss_in: endpoint {
remote-endpoint = <&usb_1_ss0_qmpphy_out>;
};
};
};
};
/* Left-side port, farther from the screen */
connector@1 {
compatible = "usb-c-connector";
reg = <1>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_ss1_hs_in: endpoint {
remote-endpoint = <&usb_1_ss1_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss1_ss_in: endpoint {
remote-endpoint = <&usb_1_ss1_qmpphy_out>;
};
};
};
};
};
reserved-memory {
linux,cma {
compatible = "shared-dma-pool";
size = <0x0 0x8000000>;
reusable;
linux,cma-default;
};
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
regulator-boot-on;
};
vreg_edp_3p3: regulator-edp-3p3 {
compatible = "regulator-fixed";
regulator-name = "VREG_EDP_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&edp_reg_en>;
pinctrl-names = "default";
regulator-always-on;
regulator-boot-on;
};
vreg_nvme: regulator-nvme {
compatible = "regulator-fixed";
regulator-name = "VREG_NVME_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&nvme_reg_en>;
pinctrl-names = "default";
};
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm8550-rpmh-regulators";
qcom,pmic-id = "b";
vdd-bob1-supply = <&vph_pwr>;
vdd-bob2-supply = <&vph_pwr>;
vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
vdd-l2-l13-l14-supply = <&vreg_bob1>;
vdd-l5-l16-supply = <&vreg_bob1>;
vdd-l6-l7-supply = <&vreg_bob2>;
vdd-l8-l9-supply = <&vreg_bob1>;
vdd-l12-supply = <&vreg_s5j_1p2>;
vdd-l15-supply = <&vreg_s4c_1p8>;
vdd-l17-supply = <&vreg_bob2>;
vreg_bob1: bob1 {
regulator-name = "vreg_bob1";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_bob2: bob2 {
regulator-name = "vreg_bob2";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2b_3p0: ldo2 {
regulator-name = "vreg_l2b_3p0";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3100000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14b_3p0: ldo14 {
regulator-name = "vreg_l14b_3p0";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm8550ve-rpmh-regulators";
qcom,pmic-id = "c";
vdd-l1-supply = <&vreg_s5j_1p2>;
vdd-l2-supply = <&vreg_s1f_0p7>;
vdd-l3-supply = <&vreg_s1f_0p7>;
vdd-s4-supply = <&vph_pwr>;
vreg_s4c_1p8: smps4 {
regulator-name = "vreg_s4c_1p8";
regulator-min-microvolt = <1856000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-2 {
compatible = "qcom,pmc8380-rpmh-regulators";
qcom,pmic-id = "d";
vdd-l1-supply = <&vreg_s1f_0p7>;
vdd-l2-supply = <&vreg_s1f_0p7>;
vdd-l3-supply = <&vreg_s4c_1p8>;
vdd-s1-supply = <&vph_pwr>;
vreg_l1d_0p8: ldo1 {
regulator-name = "vreg_l1d_0p8";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2d_0p9: ldo2 {
regulator-name = "vreg_l2d_0p9";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3d_1p8: ldo3 {
regulator-name = "vreg_l3d_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-3 {
compatible = "qcom,pmc8380-rpmh-regulators";
qcom,pmic-id = "e";
vdd-l2-supply = <&vreg_s1f_0p7>;
vdd-l3-supply = <&vreg_s5j_1p2>;
vreg_l2e_0p8: ldo2 {
regulator-name = "vreg_l2e_0p8";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3e_1p2: ldo3 {
regulator-name = "vreg_l3e_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-4 {
compatible = "qcom,pmc8380-rpmh-regulators";
qcom,pmic-id = "f";
vdd-l1-supply = <&vreg_s5j_1p2>;
vdd-l2-supply = <&vreg_s5j_1p2>;
vdd-l3-supply = <&vreg_s5j_1p2>;
vdd-s1-supply = <&vph_pwr>;
vreg_s1f_0p7: smps1 {
regulator-name = "vreg_s1f_0p7";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1100000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-6 {
compatible = "qcom,pm8550ve-rpmh-regulators";
qcom,pmic-id = "i";
vdd-l1-supply = <&vreg_s4c_1p8>;
vdd-l2-supply = <&vreg_s5j_1p2>;
vdd-l3-supply = <&vreg_s1f_0p7>;
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
};
regulators-7 {
compatible = "qcom,pm8550ve-rpmh-regulators";
qcom,pmic-id = "j";
vdd-l1-supply = <&vreg_s1f_0p7>;
vdd-l2-supply = <&vreg_s5j_1p2>;
vdd-l3-supply = <&vreg_s1f_0p7>;
vdd-s5-supply = <&vph_pwr>;
vreg_s5j_1p2: smps5 {
regulator-name = "vreg_s5j_1p2";
regulator-min-microvolt = <1256000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1j_0p8: ldo1 {
regulator-name = "vreg_l1j_0p8";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2j_1p2: ldo2 {
regulator-name = "vreg_l2j_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3j_0p8: ldo3 {
regulator-name = "vreg_l3j_0p8";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
&i2c0 {
clock-frequency = <400000>;
status = "okay";
touchpad@15 {
compatible = "hid-over-i2c";
reg = <0x15>;
hid-descr-addr = <0x1>;
interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&tpad_default>;
pinctrl-names = "default";
wakeup-source;
};
};
&i2c1 {
clock-frequency = <400000>;
status = "okay";
/* PS8830 USB4 Retimer? @ 0x8 */
};
&i2c3 {
clock-frequency = <400000>;
status = "okay";
/* PS8830 USB4 Retimer? @ 0x8 */
};
&i2c5 {
clock-frequency = <400000>;
status = "okay";
keyboard@3a {
compatible = "hid-over-i2c";
reg = <0x3a>;
hid-descr-addr = <0x1>;
interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&kybd_default>;
pinctrl-names = "default";
wakeup-source;
};
/* EC? @ 0x5b, 0x76 */
};
&i2c7 {
clock-frequency = <400000>;
status = "okay";
/* PS8830 USB4 Retimer? @ 0x8 */
};
&mdss {
status = "okay";
};
&mdss_dp3 {
compatible = "qcom,x1e80100-dp";
/delete-property/ #sound-dai-cells;
status = "okay";
aux-bus {
panel {
compatible = "edp-panel";
power-supply = <&vreg_edp_3p3>;
port {
edp_panel_in: endpoint {
remote-endpoint = <&mdss_dp3_out>;
};
};
};
};
ports {
port@1 {
reg = <1>;
mdss_dp3_out: endpoint {
data-lanes = <0 1 2 3>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
remote-endpoint = <&edp_panel_in>;
};
};
};
};
&mdss_dp3_phy {
vdda-phy-supply = <&vreg_l3j_0p8>;
vdda-pll-supply = <&vreg_l2j_1p2>;
status = "okay";
};
&pcie4 {
status = "okay";
};
&pcie4_phy {
vdda-phy-supply = <&vreg_l3j_0p8>;
vdda-pll-supply = <&vreg_l3e_1p2>;
status = "okay";
};
&pcie6a {
perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
vddpe-3v3-supply = <&vreg_nvme>;
pinctrl-0 = <&pcie6a_default>;
pinctrl-names = "default";
status = "okay";
};
&pcie6a_phy {
vdda-phy-supply = <&vreg_l1d_0p8>;
vdda-pll-supply = <&vreg_l2j_1p2>;
status = "okay";
};
&qupv3_0 {
status = "okay";
};
&qupv3_1 {
status = "okay";
};
&qupv3_2 {
status = "okay";
};
&remoteproc_adsp {
firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcadsp8380.mbn",
"qcom/x1e80100/ASUSTeK/vivobook-s15/adsp_dtbs.elf";
status = "okay";
};
&remoteproc_cdsp {
firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qccdsp8380.mbn",
"qcom/x1e80100/ASUSTeK/vivobook-s15/cdsp_dtbs.elf";
status = "okay";
};
&smb2360_0_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l2b_3p0>;
};
&smb2360_1_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l14b_3p0>;
};
&smb2360_2 {
status = "disabled";
};
&tlmm {
gpio-reserved-ranges = <34 2>, /* Unused */
<44 4>, /* SPI (TPM) */
<238 1>; /* UFS Reset */
edp_reg_en: edp-reg-en-state {
pins = "gpio70";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
kybd_default: kybd-default-state {
pins = "gpio67";
function = "gpio";
bias-disable;
};
nvme_reg_en: nvme-reg-en-state {
pins = "gpio18";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
pcie6a_default: pcie2a-default-state {
clkreq-n-pins {
pins = "gpio153";
function = "pcie6a_clk";
drive-strength = <2>;
bias-pull-up;
};
perst-n-pins {
pins = "gpio152";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
wake-n-pins {
pins = "gpio154";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
tpad_default: tpad-default-state {
pins = "gpio3";
function = "gpio";
bias-disable;
};
};
&usb_1_ss0_hsphy {
vdd-supply = <&vreg_l3j_0p8>;
vdda12-supply = <&vreg_l2j_1p2>;
phys = <&smb2360_0_eusb2_repeater>;
status = "okay";
};
&usb_1_ss0_qmpphy {
vdda-phy-supply = <&vreg_l3e_1p2>;
vdda-pll-supply = <&vreg_l1j_0p8>;
orientation-switch;
status = "okay";
};
&usb_1_ss0 {
status = "okay";
};
&usb_1_ss0_dwc3 {
dr_mode = "host";
};
&usb_1_ss0_dwc3_hs {
remote-endpoint = <&pmic_glink_ss0_hs_in>;
};
&usb_1_ss0_qmpphy_out {
remote-endpoint = <&pmic_glink_ss0_ss_in>;
};
&usb_1_ss1_hsphy {
vdd-supply = <&vreg_l3j_0p8>;
vdda12-supply = <&vreg_l2j_1p2>;
phys = <&smb2360_1_eusb2_repeater>;
status = "okay";
};
&usb_1_ss1_qmpphy {
vdda-phy-supply = <&vreg_l3e_1p2>;
vdda-pll-supply = <&vreg_l2d_0p9>;
orientation-switch;
status = "okay";
};
&usb_1_ss1 {
status = "okay";
};
&usb_1_ss1_dwc3 {
dr_mode = "host";
};
&usb_1_ss1_dwc3_hs {
remote-endpoint = <&pmic_glink_ss1_hs_in>;
};
&usb_1_ss1_qmpphy_out {
remote-endpoint = <&pmic_glink_ss1_ss_in>;
};
Codebase Browser
linux