/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _LINUX_JUMP_LABEL_H #define _LINUX_JUMP_LABEL_H /* * Jump label support * * Copyright (C) 2009-2012 Jason Baron <[email protected]> * Copyright (C) 2011-2012 Red Hat, Inc., Peter Zijlstra * * DEPRECATED API: * * The use of 'struct static_key' directly, is now DEPRECATED. In addition * static_key_{true,false}() is also DEPRECATED. IE DO NOT use the following: * * struct static_key false = STATIC_KEY_INIT_FALSE; * struct static_key true = STATIC_KEY_INIT_TRUE; * static_key_true() * static_key_false() * * The updated API replacements are: * * DEFINE_STATIC_KEY_TRUE(key); * DEFINE_STATIC_KEY_FALSE(key); * DEFINE_STATIC_KEY_ARRAY_TRUE(keys, count); * DEFINE_STATIC_KEY_ARRAY_FALSE(keys, count); * static_branch_likely() * static_branch_unlikely() * * Jump labels provide an interface to generate dynamic branches using * self-modifying code. Assuming toolchain and architecture support, if we * define a "key" that is initially false via "DEFINE_STATIC_KEY_FALSE(key)", * an "if (static_branch_unlikely(&key))" statement is an unconditional branch * (which defaults to false - and the true block is placed out of line). * Similarly, we can define an initially true key via * "DEFINE_STATIC_KEY_TRUE(key)", and use it in the same * "if (static_branch_unlikely(&key))", in which case we will generate an * unconditional branch to the out-of-line true branch. Keys that are * initially true or false can be using in both static_branch_unlikely() * and static_branch_likely() statements. * * At runtime we can change the branch target by setting the key * to true via a call to static_branch_enable(), or false using * static_branch_disable(). If the direction of the branch is switched by * these calls then we run-time modify the branch target via a * no-op -> jump or jump -> no-op conversion. For example, for an * initially false key that is used in an "if (static_branch_unlikely(&key))" * statement, setting the key to true requires us to patch in a jump * to the out-of-line of true branch. * * In addition to static_branch_{enable,disable}, we can also reference count * the key or branch direction via static_branch_{inc,dec}. Thus, * static_branch_inc() can be thought of as a 'make more true' and * static_branch_dec() as a 'make more false'. * * Since this relies on modifying code, the branch modifying functions * must be considered absolute slow paths (machine wide synchronization etc.). * OTOH, since the affected branches are unconditional, their runtime overhead * will be absolutely minimal, esp. in the default (off) case where the total * effect is a single NOP of appropriate size. The on case will patch in a jump * to the out-of-line block. * * When the control is directly exposed to userspace, it is prudent to delay the * decrement to avoid high frequency code modifications which can (and do) * cause significant performance degradation. Struct static_key_deferred and * static_key_slow_dec_deferred() provide for this. * * Lacking toolchain and or architecture support, static keys fall back to a * simple conditional branch. * * Additional babbling in: Documentation/staging/static-keys.rst */ #ifndef __ASSEMBLY__ #include <linux/types.h> #include <linux/compiler.h> extern bool static_key_initialized; #define STATIC_KEY_CHECK_USE(key) … struct static_key { … }; #endif /* __ASSEMBLY__ */ #ifdef CONFIG_JUMP_LABEL #include <asm/jump_label.h> #ifndef __ASSEMBLY__ #ifdef CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE struct jump_entry { … }; static inline unsigned long jump_entry_code(const struct jump_entry *entry) { … } static inline unsigned long jump_entry_target(const struct jump_entry *entry) { … } static inline struct static_key *jump_entry_key(const struct jump_entry *entry) { … } #else static inline unsigned long jump_entry_code(const struct jump_entry *entry) { return entry->code; } static inline unsigned long jump_entry_target(const struct jump_entry *entry) { return entry->target; } static inline struct static_key *jump_entry_key(const struct jump_entry *entry) { return (struct static_key *)((unsigned long)entry->key & ~3UL); } #endif static inline bool jump_entry_is_branch(const struct jump_entry *entry) { … } static inline bool jump_entry_is_init(const struct jump_entry *entry) { … } static inline void jump_entry_set_init(struct jump_entry *entry, bool set) { … } static inline int jump_entry_size(struct jump_entry *entry) { … } #endif #endif #ifndef __ASSEMBLY__ enum jump_label_type { … }; struct module; #ifdef CONFIG_JUMP_LABEL #define JUMP_TYPE_FALSE … #define JUMP_TYPE_TRUE … #define JUMP_TYPE_LINKED … #define JUMP_TYPE_MASK … static __always_inline bool static_key_false(struct static_key *key) { … } static __always_inline bool static_key_true(struct static_key *key) { … } extern struct jump_entry __start___jump_table[]; extern struct jump_entry __stop___jump_table[]; extern void jump_label_init(void); extern void jump_label_init_ro(void); extern void jump_label_lock(void); extern void jump_label_unlock(void); extern void arch_jump_label_transform(struct jump_entry *entry, enum jump_label_type type); extern bool arch_jump_label_transform_queue(struct jump_entry *entry, enum jump_label_type type); extern void arch_jump_label_transform_apply(void); extern int jump_label_text_reserved(void *start, void *end); extern bool static_key_slow_inc(struct static_key *key); extern bool static_key_fast_inc_not_disabled(struct static_key *key); extern void static_key_slow_dec(struct static_key *key); extern bool static_key_slow_inc_cpuslocked(struct static_key *key); extern void static_key_slow_dec_cpuslocked(struct static_key *key); extern int static_key_count(struct static_key *key); extern void static_key_enable(struct static_key *key); extern void static_key_disable(struct static_key *key); extern void static_key_enable_cpuslocked(struct static_key *key); extern void static_key_disable_cpuslocked(struct static_key *key); extern enum jump_label_type jump_label_init_type(struct jump_entry *entry); /* * We should be using ATOMIC_INIT() for initializing .enabled, but * the inclusion of atomic.h is problematic for inclusion of jump_label.h * in 'low-level' headers. Thus, we are initializing .enabled with a * raw value, but have added a BUILD_BUG_ON() to catch any issues in * jump_label_init() see: kernel/jump_label.c. */ #define STATIC_KEY_INIT_TRUE … #define STATIC_KEY_INIT_FALSE … #else /* !CONFIG_JUMP_LABEL */ #include <linux/atomic.h> #include <linux/bug.h> static __always_inline int static_key_count(struct static_key *key) { return raw_atomic_read(&key->enabled); } static __always_inline void jump_label_init(void) { static_key_initialized = true; } static __always_inline void jump_label_init_ro(void) { } static __always_inline bool static_key_false(struct static_key *key) { if (unlikely_notrace(static_key_count(key) > 0)) return true; return false; } static __always_inline bool static_key_true(struct static_key *key) { if (likely_notrace(static_key_count(key) > 0)) return true; return false; } static inline bool static_key_fast_inc_not_disabled(struct static_key *key) { int v; STATIC_KEY_CHECK_USE(key); /* * Prevent key->enabled getting negative to follow the same semantics * as for CONFIG_JUMP_LABEL=y, see kernel/jump_label.c comment. */ v = atomic_read(&key->enabled); do { if (v < 0 || (v + 1) < 0) return false; } while (!likely(atomic_try_cmpxchg(&key->enabled, &v, v + 1))); return true; } #define static_key_slow_inc … static inline void static_key_slow_dec(struct static_key *key) { STATIC_KEY_CHECK_USE(key); atomic_dec(&key->enabled); } #define static_key_slow_inc_cpuslocked … #define static_key_slow_dec_cpuslocked … static inline int jump_label_text_reserved(void *start, void *end) { return 0; } static inline void jump_label_lock(void) {} static inline void jump_label_unlock(void) {} static inline void static_key_enable(struct static_key *key) { STATIC_KEY_CHECK_USE(key); if (atomic_read(&key->enabled) != 0) { WARN_ON_ONCE(atomic_read(&key->enabled) != 1); return; } atomic_set(&key->enabled, 1); } static inline void static_key_disable(struct static_key *key) { STATIC_KEY_CHECK_USE(key); if (atomic_read(&key->enabled) != 1) { WARN_ON_ONCE(atomic_read(&key->enabled) != 0); return; } atomic_set(&key->enabled, 0); } #define static_key_enable_cpuslocked … #define static_key_disable_cpuslocked … #define STATIC_KEY_INIT_TRUE … #define STATIC_KEY_INIT_FALSE … #endif /* CONFIG_JUMP_LABEL */ #define STATIC_KEY_INIT … #define jump_label_enabled … /* -------------------------------------------------------------------------- */ /* * Two type wrappers around static_key, such that we can use compile time * type differentiation to emit the right code. * * All the below code is macros in order to play type games. */ struct static_key_true { … }; struct static_key_false { … }; #define STATIC_KEY_TRUE_INIT … #define STATIC_KEY_FALSE_INIT … #define DEFINE_STATIC_KEY_TRUE(name) … #define DEFINE_STATIC_KEY_TRUE_RO(name) … #define DECLARE_STATIC_KEY_TRUE(name) … #define DEFINE_STATIC_KEY_FALSE(name) … #define DEFINE_STATIC_KEY_FALSE_RO(name) … #define DECLARE_STATIC_KEY_FALSE(name) … #define DEFINE_STATIC_KEY_ARRAY_TRUE(name, count) … #define DEFINE_STATIC_KEY_ARRAY_FALSE(name, count) … #define _DEFINE_STATIC_KEY_1(name) … #define _DEFINE_STATIC_KEY_0(name) … #define DEFINE_STATIC_KEY_MAYBE(cfg, name) … #define _DEFINE_STATIC_KEY_RO_1(name) … #define _DEFINE_STATIC_KEY_RO_0(name) … #define DEFINE_STATIC_KEY_MAYBE_RO(cfg, name) … #define _DECLARE_STATIC_KEY_1(name) … #define _DECLARE_STATIC_KEY_0(name) … #define DECLARE_STATIC_KEY_MAYBE(cfg, name) … extern bool ____wrong_branch_error(void); #define static_key_enabled(x) … #ifdef CONFIG_JUMP_LABEL /* * Combine the right initial value (type) with the right branch order * to generate the desired result. * * * type\branch| likely (1) | unlikely (0) * -----------+-----------------------+------------------ * | | * true (1) | ... | ... * | NOP | JMP L * | <br-stmts> | 1: ... * | L: ... | * | | * | | L: <br-stmts> * | | jmp 1b * | | * -----------+-----------------------+------------------ * | | * false (0) | ... | ... * | JMP L | NOP * | <br-stmts> | 1: ... * | L: ... | * | | * | | L: <br-stmts> * | | jmp 1b * | | * -----------+-----------------------+------------------ * * The initial value is encoded in the LSB of static_key::entries, * type: 0 = false, 1 = true. * * The branch type is encoded in the LSB of jump_entry::key, * branch: 0 = unlikely, 1 = likely. * * This gives the following logic table: * * enabled type branch instuction * -----------------------------+----------- * 0 0 0 | NOP * 0 0 1 | JMP * 0 1 0 | NOP * 0 1 1 | JMP * * 1 0 0 | JMP * 1 0 1 | NOP * 1 1 0 | JMP * 1 1 1 | NOP * * Which gives the following functions: * * dynamic: instruction = enabled ^ branch * static: instruction = type ^ branch * * See jump_label_type() / jump_label_init_type(). */ #define static_branch_likely(x) … #define static_branch_unlikely(x) … #else /* !CONFIG_JUMP_LABEL */ #define static_branch_likely … #define static_branch_unlikely … #endif /* CONFIG_JUMP_LABEL */ #define static_branch_maybe(config, x) … /* * Advanced usage; refcount, branch is enabled when: count != 0 */ #define static_branch_inc(x) … #define static_branch_dec(x) … #define static_branch_inc_cpuslocked(x) … #define static_branch_dec_cpuslocked(x) … /* * Normal usage; boolean enable/disable. */ #define static_branch_enable(x) … #define static_branch_disable(x) … #define static_branch_enable_cpuslocked(x) … #define static_branch_disable_cpuslocked(x) … #endif /* __ASSEMBLY__ */ #endif /* _LINUX_JUMP_LABEL_H */
Codebase Browser
linux