linux/Documentation/devicetree/bindings/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm SM4250 SoC LPASS LPI TLMM

maintainers:
  - Srinivas Kandagatla <[email protected]>

description:
  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
  (LPASS) Low Power Island (LPI) of Qualcomm SM4250 SoC.

properties:
  compatible:
    const: qcom,sm4250-lpass-lpi-pinctrl

  reg:
    items:
      - description: LPASS LPI TLMM Control and Status registers
      - description: LPASS LPI MCC registers

  clocks:
    items:
      - description: LPASS Audio voting clock

  clock-names:
    items:
      - const: audio

patternProperties:
  "-state$":
    oneOf:
      - $ref: "#/$defs/qcom-sm4250-lpass-state"
      - patternProperties:
          "-pins$":
            $ref: "#/$defs/qcom-sm4250-lpass-state"
        additionalProperties: false

$defs:
  qcom-sm4250-lpass-state:
    type: object
    description:
      Pinctrl node's client devices use subnodes for desired pin configuration.
      Client device subnodes use below standard properties.
    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
    unevaluatedProperties: false

    properties:
      pins:
        description:
          List of gpio pins affected by the properties specified in this
          subnode.
        items:
          pattern: "^gpio([0-9]|1[0-9]|2[0-6])$"

      function:
        enum: [ gpio, dmic01_clk, dmic01_data, dmic23_clk, dmic23_data,
                dmic4_clk, dmic4_data, ext_mclk0_a, ext_mclk0_b, ext_mclk1_a,
                ext_mclk1_b, ext_mclk1_c, i2s1_clk, i2s1_data, i2s1_ws,
                i2s2_clk, i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws,
                qua_mi2s_data, qua_mi2s_sclk, qua_mi2s_ws, slim_clk, slim_data,
                swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, swr_wsa_clk,
                swr_wsa_data ]
        description:
          Specify the alternative function to be configured for the specified
          pins.

allOf:
  - $ref: qcom,lpass-lpi-common.yaml#

required:
  - compatible
  - reg
  - clocks
  - clock-names

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/sound/qcom,q6afe.h>
    lpi_tlmm: pinctrl@a7c0000 {
        compatible = "qcom,sm4250-lpass-lpi-pinctrl";
        reg = <0xa7c0000 0x20000>,
              <0xa950000 0x10000>;
        clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
        clock-names = "audio";
        gpio-controller;
        #gpio-cells = <2>;
        gpio-ranges = <&lpi_tlmm 0 0 19>;

        i2s2-active-state {
            clk-pins {
                pins = "gpio10";
                function = "i2s2_clk";
                drive-strength = <2>;
                slew-rate = <1>;
                bias-disable;
            };

            data-pins {
                pins = "gpio12";
                function = "i2s2_data";
                drive-strength = <2>;
                slew-rate = <1>;
            };
        };

        i2s2-sleep-clk-state {
            pins = "gpio10";
            function = "i2s2_clk";
            drive-strength = <2>;
            bias-pull-down;
        };
    };