linux/include/linux/micrel_phy.h

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
 * include/linux/micrel_phy.h
 *
 * Micrel PHY IDs
 */

#ifndef _MICREL_PHY_H
#define _MICREL_PHY_H

#define MICREL_OUI …

#define MICREL_PHY_ID_MASK …

#define PHY_ID_KSZ8873MLL …
#define PHY_ID_KSZ9021 …
#define PHY_ID_KSZ9021RLRN …
#define PHY_ID_KS8737 …
#define PHY_ID_KSZ8021 …
#define PHY_ID_KSZ8031 …
#define PHY_ID_KSZ8041 …
/* undocumented */
#define PHY_ID_KSZ8041RNLI …
#define PHY_ID_KSZ8051 …
/* same id: ks8001 Rev. A/B, and ks8721 Rev 3. */
#define PHY_ID_KSZ8001 …
/* same id: KS8081, KS8091 */
#define PHY_ID_KSZ8081 …
#define PHY_ID_KSZ8061 …
#define PHY_ID_KSZ9031 …
#define PHY_ID_KSZ9131 …
#define PHY_ID_LAN8814 …
#define PHY_ID_LAN8804 …
#define PHY_ID_LAN8841 …

#define PHY_ID_KSZ886X …
#define PHY_ID_KSZ8863 …

#define PHY_ID_KSZ87XX …

#define PHY_ID_KSZ9477 …

/* struct phy_device dev_flags definitions */
#define MICREL_PHY_50MHZ_CLK …
#define MICREL_PHY_FXEN …
#define MICREL_KSZ8_P1_ERRATA …
#define MICREL_NO_EEE …

#define MICREL_KSZ9021_EXTREG_CTRL …
#define MICREL_KSZ9021_EXTREG_DATA_WRITE …
#define MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW …
#define MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW …

/* Device specific MII_BMCR (Reg 0) bits */
/* 1 = HP Auto MDI/MDI-X mode, 0 = Microchip Auto MDI/MDI-X mode */
#define KSZ886X_BMCR_HP_MDIX …
/* 1 = Force MDI (transmit on RXP/RXM pins), 0 = Normal operation
 * (transmit on TXP/TXM pins)
 */
#define KSZ886X_BMCR_FORCE_MDI …
/* 1 = Disable auto MDI-X */
#define KSZ886X_BMCR_DISABLE_AUTO_MDIX …
#define KSZ886X_BMCR_DISABLE_FAR_END_FAULT …
#define KSZ886X_BMCR_DISABLE_TRANSMIT …
#define KSZ886X_BMCR_DISABLE_LED …

/* PHY Special Control/Status Register (Reg 31) */
#define KSZ886X_CTRL_MDIX_STAT …
#define KSZ886X_CTRL_FORCE_LINK …
#define KSZ886X_CTRL_PWRSAVE …
#define KSZ886X_CTRL_REMOTE_LOOPBACK …

#endif /* _MICREL_PHY_H */