/* SPDX-License-Identifier: BSD-3-Clause-Clear */ /* * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved. * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved. */ #ifndef ATH12K_RX_DESC_H #define ATH12K_RX_DESC_H enum rx_desc_decap_type { … }; enum rx_desc_decrypt_status_code { … }; #define RX_MPDU_START_INFO0_REO_DEST_IND … #define RX_MPDU_START_INFO0_LMAC_PEER_ID_MSB … #define RX_MPDU_START_INFO0_FLOW_ID_TOEPLITZ … #define RX_MPDU_START_INFO0_PKT_SEL_FP_UCAST_DATA … #define RX_MPDU_START_INFO0_PKT_SEL_FP_MCAST_DATA … #define RX_MPDU_START_INFO0_PKT_SEL_FP_CTRL_BAR … #define RX_MPDU_START_INFO0_RXDMA0_SRC_RING_SEL … #define RX_MPDU_START_INFO0_RXDMA0_DST_RING_SEL … #define RX_MPDU_START_INFO0_MCAST_ECHO_DROP_EN … #define RX_MPDU_START_INFO0_WDS_LEARN_DETECT_EN … #define RX_MPDU_START_INFO0_INTRA_BSS_CHECK_EN … #define RX_MPDU_START_INFO0_USE_PPE … #define RX_MPDU_START_INFO0_PPE_ROUTING_EN … #define RX_MPDU_START_INFO1_REO_QUEUE_DESC_HI … #define RX_MPDU_START_INFO1_RECV_QUEUE_NUM … #define RX_MPDU_START_INFO1_PRE_DELIM_ERR_WARN … #define RX_MPDU_START_INFO1_FIRST_DELIM_ERR … #define RX_MPDU_START_INFO2_EPD_EN … #define RX_MPDU_START_INFO2_ALL_FRAME_ENCPD … #define RX_MPDU_START_INFO2_ENC_TYPE … #define RX_MPDU_START_INFO2_VAR_WEP_KEY_WIDTH … #define RX_MPDU_START_INFO2_MESH_STA … #define RX_MPDU_START_INFO2_BSSID_HIT … #define RX_MPDU_START_INFO2_BSSID_NUM … #define RX_MPDU_START_INFO2_TID … #define RX_MPDU_START_INFO3_RXPCU_MPDU_FLTR … #define RX_MPDU_START_INFO3_SW_FRAME_GRP_ID … #define RX_MPDU_START_INFO3_NDP_FRAME … #define RX_MPDU_START_INFO3_PHY_ERR … #define RX_MPDU_START_INFO3_PHY_ERR_MPDU_HDR … #define RX_MPDU_START_INFO3_PROTO_VER_ERR … #define RX_MPDU_START_INFO3_AST_LOOKUP_VALID … #define RX_MPDU_START_INFO3_RANGING … #define RX_MPDU_START_INFO4_MPDU_FCTRL_VALID … #define RX_MPDU_START_INFO4_MPDU_DUR_VALID … #define RX_MPDU_START_INFO4_MAC_ADDR1_VALID … #define RX_MPDU_START_INFO4_MAC_ADDR2_VALID … #define RX_MPDU_START_INFO4_MAC_ADDR3_VALID … #define RX_MPDU_START_INFO4_MAC_ADDR4_VALID … #define RX_MPDU_START_INFO4_MPDU_SEQ_CTRL_VALID … #define RX_MPDU_START_INFO4_MPDU_QOS_CTRL_VALID … #define RX_MPDU_START_INFO4_MPDU_HT_CTRL_VALID … #define RX_MPDU_START_INFO4_ENCRYPT_INFO_VALID … #define RX_MPDU_START_INFO4_MPDU_FRAG_NUMBER … #define RX_MPDU_START_INFO4_MORE_FRAG_FLAG … #define RX_MPDU_START_INFO4_FROM_DS … #define RX_MPDU_START_INFO4_TO_DS … #define RX_MPDU_START_INFO4_ENCRYPTED … #define RX_MPDU_START_INFO4_MPDU_RETRY … #define RX_MPDU_START_INFO4_MPDU_SEQ_NUM … #define RX_MPDU_START_INFO5_KEY_ID … #define RX_MPDU_START_INFO5_NEW_PEER_ENTRY … #define RX_MPDU_START_INFO5_DECRYPT_NEEDED … #define RX_MPDU_START_INFO5_DECAP_TYPE … #define RX_MPDU_START_INFO5_VLAN_TAG_C_PADDING … #define RX_MPDU_START_INFO5_VLAN_TAG_S_PADDING … #define RX_MPDU_START_INFO5_STRIP_VLAN_TAG_C … #define RX_MPDU_START_INFO5_STRIP_VLAN_TAG_S … #define RX_MPDU_START_INFO5_PRE_DELIM_COUNT … #define RX_MPDU_START_INFO5_AMPDU_FLAG … #define RX_MPDU_START_INFO5_BAR_FRAME … #define RX_MPDU_START_INFO5_RAW_MPDU … #define RX_MPDU_START_INFO6_MPDU_LEN … #define RX_MPDU_START_INFO6_FIRST_MPDU … #define RX_MPDU_START_INFO6_MCAST_BCAST … #define RX_MPDU_START_INFO6_AST_IDX_NOT_FOUND … #define RX_MPDU_START_INFO6_AST_IDX_TIMEOUT … #define RX_MPDU_START_INFO6_POWER_MGMT … #define RX_MPDU_START_INFO6_NON_QOS … #define RX_MPDU_START_INFO6_NULL_DATA … #define RX_MPDU_START_INFO6_MGMT_TYPE … #define RX_MPDU_START_INFO6_CTRL_TYPE … #define RX_MPDU_START_INFO6_MORE_DATA … #define RX_MPDU_START_INFO6_EOSP … #define RX_MPDU_START_INFO6_FRAGMENT … #define RX_MPDU_START_INFO6_ORDER … #define RX_MPDU_START_INFO6_UAPSD_TRIGGER … #define RX_MPDU_START_INFO6_ENCRYPT_REQUIRED … #define RX_MPDU_START_INFO6_DIRECTED … #define RX_MPDU_START_INFO6_AMSDU_PRESENT … #define RX_MPDU_START_INFO7_VDEV_ID … #define RX_MPDU_START_INFO7_SERVICE_CODE … #define RX_MPDU_START_INFO7_PRIORITY_VALID … #define RX_MPDU_START_INFO7_SRC_INFO … #define RX_MPDU_START_INFO8_AUTH_TO_SEND_WDS … struct rx_mpdu_start_qcn9274 { … } __packed; #define QCN9274_MPDU_START_SELECT_MPDU_START_TAG … #define QCN9274_MPDU_START_SELECT_INFO0_REO_QUEUE_DESC_LO … #define QCN9274_MPDU_START_SELECT_INFO1_PN_31_0 … #define QCN9274_MPDU_START_SELECT_PN_95_32 … #define QCN9274_MPDU_START_SELECT_PN_127_96_INFO2 … #define QCN9274_MPDU_START_SELECT_PEER_MDATA_INFO3_PHY_PPDU_ID … #define QCN9274_MPDU_START_SELECT_AST_IDX_SW_PEER_ID_INFO4 … #define QCN9274_MPDU_START_SELECT_INFO5_INFO6 … #define QCN9274_MPDU_START_SELECT_FRAME_CTRL_DURATION_ADDR1_31_0 … #define QCN9274_MPDU_START_SELECT_ADDR2_47_0_ADDR1_47_32 … #define QCN9274_MPDU_START_SELECT_ADDR3_47_0_SEQ_CTRL … #define QCN9274_MPDU_START_SELECT_ADDR4_47_0_QOS_CTRL … #define QCN9274_MPDU_START_SELECT_HT_CTRL_INFO7 … #define QCN9274_MPDU_START_SELECT_ML_ADDR1_47_0_ML_ADDR2_15_0 … #define QCN9274_MPDU_START_SELECT_ML_ADDR2_47_16_INFO8 … #define QCN9274_MPDU_START_SELECT_RES_0_RES_1 … #define QCN9274_MPDU_START_WMASK … /* The below rx_mpdu_start_qcn9274_compact structure is tied with the mask * value QCN9274_MPDU_START_WMASK. If the mask value changes the structure * will also change. */ struct rx_mpdu_start_qcn9274_compact { … } __packed; /* rx_mpdu_start * * reo_destination_indication * The id of the reo exit ring where the msdu frame shall push * after (MPDU level) reordering has finished. Values are defined * in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_. * * lmac_peer_id_msb * * If use_flow_id_toeplitz_clfy is set and lmac_peer_id_'sb * is 2'b00, Rx OLE uses a REO destination indicati'n of {1'b1, * hash[3:0]} using the chosen Toeplitz hash from Common Parser * if flow search fails. * If use_flow_id_toeplitz_clfy is set and lmac_peer_id_msb * 's not 2'b00, Rx OLE uses a REO destination indication of * {lmac_peer_id_msb, hash[2:0]} using the chosen Toeplitz * hash from Common Parser if flow search fails. * * use_flow_id_toeplitz_clfy * Indication to Rx OLE to enable REO destination routing based * on the chosen Toeplitz hash from Common Parser, in case * flow search fails * * pkt_selection_fp_ucast_data * Filter pass Unicast data frame (matching rxpcu_filter_pass * and sw_frame_group_Unicast_data) routing selection * * pkt_selection_fp_mcast_data * Filter pass Multicast data frame (matching rxpcu_filter_pass * and sw_frame_group_Multicast_data) routing selection * * pkt_selection_fp_ctrl_bar * Filter pass BAR frame (matching rxpcu_filter_pass * and sw_frame_group_ctrl_1000) routing selection * * rxdma0_src_ring_selection * Field only valid when for the received frame type the corresponding * pkt_selection_fp_... bit is set * * rxdma0_dst_ring_selection * Field only valid when for the received frame type the corresponding * pkt_selection_fp_... bit is set * * mcast_echo_drop_enable * If set, for multicast packets, multicast echo check (i.e. * SA search with mcast_echo_check = 1) shall be performed * by RXOLE, and any multicast echo packets should be indicated * to RXDMA for release to WBM * * wds_learning_detect_en * If set, WDS learning detection based on SA search and notification * to FW (using RXDMA0 status ring) is enabled and the "timestamp" * field in address search failure cache-only entry should * be used to avoid multiple WDS learning notifications. * * intrabss_check_en * If set, intra-BSS routing detection is enabled * * use_ppe * Indicates to RXDMA to ignore the REO_destination_indication * and use a programmed value corresponding to the REO2PPE * ring * This override to REO2PPE for packets requiring multiple * buffers shall be disabled based on an RXDMA configuration, * as PPE may not support such packets. * * Supported only in full AP chips, not in client/soft * chips * * ppe_routing_enable * Global enable/disable bit for routing to PPE, used to disable * PPE routing even if RXOLE CCE or flow search indicate 'Use_PPE' * This is set by SW for peers which are being handled by a * host SW/accelerator subsystem that also handles packet * buffer management for WiFi-to-PPE routing. * * This is cleared by SW for peers which are being handled * by a different subsystem, completely disabling WiFi-to-PPE * routing for such peers. * * rx_reo_queue_desc_addr_lo * Address (lower 32 bits) of the REO queue descriptor. * * rx_reo_queue_desc_addr_hi * Address (upper 8 bits) of the REO queue descriptor. * * receive_queue_number * Indicates the MPDU queue ID to which this MPDU link * descriptor belongs. * * pre_delim_err_warning * Indicates that a delimiter FCS error was found in between the * previous MPDU and this MPDU. Note that this is just a warning, * and does not mean that this MPDU is corrupted in any way. If * it is, there will be other errors indicated such as FCS or * decrypt errors. * * first_delim_err * Indicates that the first delimiter had a FCS failure. * * pn * The PN number. * * epd_en * Field only valid when AST_based_lookup_valid == 1. * In case of ndp or phy_err or AST_based_lookup_valid == 0, * this field will be set to 0 * If set to one use EPD instead of LPD * In case of ndp or phy_err, this field will never be set. * * all_frames_shall_be_encrypted * In case of ndp or phy_err or AST_based_lookup_valid == 0, * this field will be set to 0 * * When set, all frames (data only ?) shall be encrypted. If * not, RX CRYPTO shall set an error flag. * * * encrypt_type * In case of ndp or phy_err or AST_based_lookup_valid == 0, * this field will be set to 0 * * Indicates type of decrypt cipher used (as defined in the * peer entry) * * wep_key_width_for_variable_key * * Field only valid when key_type is set to wep_varied_width. * * mesh_sta * * bssid_hit * When set, the BSSID of the incoming frame matched one of * the 8 BSSID register values * bssid_number * Field only valid when bssid_hit is set. * This number indicates which one out of the 8 BSSID register * values matched the incoming frame * * tid * Field only valid when mpdu_qos_control_valid is set * The TID field in the QoS control field * * peer_meta_data * Meta data that SW has programmed in the Peer table entry * of the transmitting STA. * * rxpcu_mpdu_filter_in_category * Field indicates what the reason was that this mpdu frame * was allowed to come into the receive path by rxpcu. Values * are defined in enum %RX_DESC_RXPCU_FILTER_*. * * sw_frame_group_id * SW processes frames based on certain classifications. Values * are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*. * * ndp_frame * When set, the received frame was an NDP frame, and thus * there will be no MPDU data. * phy_err * When set, a PHY error was received before MAC received any * data, and thus there will be no MPDU data. * * phy_err_during_mpdu_header * When set, a PHY error was received before MAC received the * complete MPDU header which was needed for proper decoding * * protocol_version_err * Set when RXPCU detected a version error in the Frame control * field * * ast_based_lookup_valid * When set, AST based lookup for this frame has found a valid * result. * * ranging * When set, a ranging NDPA or a ranging NDP was received. * * phy_ppdu_id * A ppdu counter value that PHY increments for every PPDU * received. The counter value wraps around. * * ast_index * * This field indicates the index of the AST entry corresponding * to this MPDU. It is provided by the GSE module instantiated * in RXPCU. * A value of 0xFFFF indicates an invalid AST index, meaning * that No AST entry was found or NO AST search was performed * * sw_peer_id * In case of ndp or phy_err or AST_based_lookup_valid == 0, * this field will be set to 0 * This field indicates a unique peer identifier. It is set * equal to field 'sw_peer_id' from the AST entry * * frame_control_valid * When set, the field Mpdu_Frame_control_field has valid information * * frame_duration_valid * When set, the field Mpdu_duration_field has valid information * * mac_addr_ad1..4_valid * When set, the fields mac_addr_adx_..... have valid information * * mpdu_seq_ctrl_valid * * When set, the fields mpdu_sequence_control_field and mpdu_sequence_number * have valid information as well as field * For MPDUs without a sequence control field, this field will * not be set. * * mpdu_qos_ctrl_valid, mpdu_ht_ctrl_valid * * When set, the field mpdu_qos_control_field, mpdu_ht_control has valid * information, For MPDUs without a QoS,HT control field, this field * will not be set. * * frame_encryption_info_valid * * When set, the encryption related info fields, like IV and * PN are valid * For MPDUs that are not encrypted, this will not be set. * * mpdu_fragment_number * * Field only valid when Mpdu_sequence_control_valid is set * AND Fragment_flag is set. The fragment number from the 802.11 header * * more_fragment_flag * * The More Fragment bit setting from the MPDU header of the * received frame * * fr_ds * * Field only valid when Mpdu_frame_control_valid is set * Set if the from DS bit is set in the frame control. * * to_ds * * Field only valid when Mpdu_frame_control_valid is set * Set if the to DS bit is set in the frame control. * * encrypted * * Field only valid when Mpdu_frame_control_valid is set. * Protected bit from the frame control. * * mpdu_retry * Field only valid when Mpdu_frame_control_valid is set. * Retry bit from the frame control. Only valid when first_msdu is set * * mpdu_sequence_number * Field only valid when Mpdu_sequence_control_valid is set. * * The sequence number from the 802.11 header. * key_id * The key ID octet from the IV. * Field only valid when Frame_encryption_info_valid is set * * new_peer_entry * Set if new RX_PEER_ENTRY TLV follows. If clear, RX_PEER_ENTRY * doesn't follow so RX DECRYPTION module either uses old peer * entry or not decrypt. * * decrypt_needed * When RXPCU sets bit 'ast_index_not_found or ast_index_timeout', * RXPCU will also ensure that this bit is NOT set. CRYPTO for that * reason only needs to evaluate this bit and non of the other ones * * decap_type * Used by the OLE during decapsulation. Values are defined in * enum %MPDU_START_DECAP_TYPE_*. * * rx_insert_vlan_c_tag_padding * rx_insert_vlan_s_tag_padding * Insert 4 byte of all zeros as VLAN tag or double VLAN tag if * the rx payload does not have VLAN. * * strip_vlan_c_tag_decap * strip_vlan_s_tag_decap * Strip VLAN or double VLAN during decapsulation. * * pre_delim_count * The number of delimiters before this MPDU. Note that this * number is cleared at PPDU start. If this MPDU is the first * received MPDU in the PPDU and this MPDU gets filtered-in, * this field will indicate the number of delimiters located * after the last MPDU in the previous PPDU. * * If this MPDU is located after the first received MPDU in * an PPDU, this field will indicate the number of delimiters * located between the previous MPDU and this MPDU. * * ampdu_flag * Received frame was part of an A-MPDU. * * bar_frame * Received frame is a BAR frame * * raw_mpdu * Set when no 802.11 to nwifi/ethernet hdr conversion is done * * mpdu_length * MPDU length before decapsulation. * * first_mpdu * Indicates the first MSDU of the PPDU. If both first_mpdu * and last_mpdu are set in the MSDU then this is a not an * A-MPDU frame but a stand alone MPDU. Interior MPDU in an * A-MPDU shall have both first_mpdu and last_mpdu bits set to * 0. The PPDU start status will only be valid when this bit * is set. * * mcast_bcast * Multicast / broadcast indicator. Only set when the MAC * address 1 bit 0 is set indicating mcast/bcast and the BSSID * matches one of the 4 BSSID registers. Only set when * first_msdu is set. * * ast_index_not_found * Only valid when first_msdu is set. Indicates no AST matching * entries within the max search count. * * ast_index_timeout * Only valid when first_msdu is set. Indicates an unsuccessful * search in the address search table due to timeout. * * power_mgmt * Power management bit set in the 802.11 header. Only set * when first_msdu is set. * * non_qos * Set if packet is not a non-QoS data frame. Only set when * first_msdu is set. * * null_data * Set if frame type indicates either null data or QoS null * data format. Only set when first_msdu is set. * * mgmt_type * Set if packet is a management packet. Only set when * first_msdu is set. * * ctrl_type * Set if packet is a control packet. Only set when first_msdu * is set. * * more_data * Set if more bit in frame control is set. Only set when * first_msdu is set. * * eosp * Set if the EOSP (end of service period) bit in the QoS * control field is set. Only set when first_msdu is set. * * * fragment_flag * Fragment indication * * order * Set if the order bit in the frame control is set. Only * set when first_msdu is set. * * u_apsd_trigger * U-APSD trigger frame * * encrypt_required * Indicates that this data type frame is not encrypted even if * the policy for this MPDU requires encryption as indicated in * the peer table key type. * * directed * MPDU is a directed packet which means that the RA matched * our STA addresses. In proxySTA it means that the TA matched * an entry in our address search table with the corresponding * 'no_ack' bit is the address search entry cleared. * amsdu_present * AMSDU present * * mpdu_frame_control_field * Frame control field in header. Only valid when the field is marked valid. * * mpdu_duration_field * Duration field in header. Only valid when the field is marked valid. * * mac_addr_adx * MAC addresses in the received frame. Only valid when corresponding * address valid bit is set * * mpdu_qos_control_field, mpdu_ht_control_field * QoS/HT control fields from header. Valid only when corresponding fields * are marked valid * * vdev_id * Virtual device associated with this peer * RXOLE uses this to determine intra-BSS routing. * * service_code * Opaque service code between PPE and Wi-Fi * This field gets passed on by REO to PPE in the EDMA descriptor * ('REO_TO_PPE_RING'). * * priority_valid * This field gets passed on by REO to PPE in the EDMA descriptor * ('REO_TO_PPE_RING'). * * src_info * Source (virtual) device/interface info. associated with * this peer * This field gets passed on by REO to PPE in the EDMA descriptor * ('REO_TO_PPE_RING'). * * multi_link_addr_ad1_ad2_valid * If set, Rx OLE shall convert Address1 and Address2 of received * data frames to multi-link addresses during decapsulation to eth/nwifi * * multi_link_addr_ad1,ad2 * Multi-link receiver address1,2. Only valid when corresponding * valid bit is set * * authorize_to_send_wds * If not set, RXDMA shall perform error-routing for WDS packets * as the sender is not authorized and might misuse WDS frame * format to inject packets with arbitrary DA/SA. * */ enum rx_msdu_start_pkt_type { … }; enum rx_msdu_start_sgi { … }; enum rx_msdu_start_recv_bw { … }; enum rx_msdu_start_reception_type { … }; #define RX_MSDU_END_64_TLV_SRC_LINK_ID … #define RX_MSDU_END_INFO0_RXPCU_MPDU_FITLER … #define RX_MSDU_END_INFO0_SW_FRAME_GRP_ID … #define RX_MSDU_END_INFO1_REPORTED_MPDU_LENGTH … #define RX_MSDU_END_INFO2_CCE_SUPER_RULE … #define RX_MSDU_END_INFO2_CCND_TRUNCATE … #define RX_MSDU_END_INFO2_CCND_CCE_DIS … #define RX_MSDU_END_INFO3_DA_OFFSET … #define RX_MSDU_END_INFO3_SA_OFFSET … #define RX_MSDU_END_INFO3_DA_OFFSET_VALID … #define RX_MSDU_END_INFO3_SA_OFFSET_VALID … #define RX_MSDU_END_INFO4_TCP_FLAG … #define RX_MSDU_END_INFO4_LRO_ELIGIBLE … #define RX_MSDU_END_INFO5_SA_IDX_TIMEOUT … #define RX_MSDU_END_INFO5_DA_IDX_TIMEOUT … #define RX_MSDU_END_INFO5_SA_IS_VALID … #define RX_MSDU_END_INFO5_DA_IS_VALID … #define RX_MSDU_END_INFO5_DA_IS_MCBC … #define RX_MSDU_END_INFO5_L3_HDR_PADDING … #define RX_MSDU_END_INFO5_FIRST_MSDU … #define RX_MSDU_END_INFO5_LAST_MSDU … #define RX_MSDU_END_INFO5_IP_CHKSUM_FAIL_COPY … #define RX_MSDU_END_QCN9274_INFO5_TO_DS … #define RX_MSDU_END_QCN9274_INFO5_TID … #define RX_MSDU_END_QCN9274_INFO5_FROM_DS … #define RX_MSDU_END_INFO6_MSDU_DROP … #define RX_MSDU_END_INFO6_REO_DEST_IND … #define RX_MSDU_END_INFO6_FLOW_IDX … #define RX_MSDU_END_INFO6_USE_PPE … #define RX_MSDU_END_INFO6_MESH_STA … #define RX_MSDU_END_INFO6_VLAN_CTAG_STRIPPED … #define RX_MSDU_END_INFO6_VLAN_STAG_STRIPPED … #define RX_MSDU_END_INFO6_FRAGMENT_FLAG … #define RX_MSDU_END_INFO7_AGGR_COUNT … #define RX_MSDU_END_INFO7_FLOW_AGGR_CONTN … #define RX_MSDU_END_INFO7_FISA_TIMEOUT … #define RX_MSDU_END_QCN9274_INFO7_TCPUDP_CSUM_FAIL_CPY … #define RX_MSDU_END_QCN9274_INFO7_MSDU_LIMIT_ERROR … #define RX_MSDU_END_QCN9274_INFO7_FLOW_IDX_TIMEOUT … #define RX_MSDU_END_QCN9274_INFO7_FLOW_IDX_INVALID … #define RX_MSDU_END_QCN9274_INFO7_CCE_MATCH … #define RX_MSDU_END_QCN9274_INFO7_AMSDU_PARSER_ERR … #define RX_MSDU_END_QCN9274_INFO8_KEY_ID … #define RX_MSDU_END_INFO9_SERVICE_CODE … #define RX_MSDU_END_INFO9_PRIORITY_VALID … #define RX_MSDU_END_INFO9_INRA_BSS … #define RX_MSDU_END_INFO9_DEST_CHIP_ID … #define RX_MSDU_END_INFO9_MCAST_ECHO … #define RX_MSDU_END_INFO9_WDS_LEARN_EVENT … #define RX_MSDU_END_INFO9_WDS_ROAM_EVENT … #define RX_MSDU_END_INFO9_WDS_KEEP_ALIVE_EVENT … #define RX_MSDU_END_INFO10_MSDU_LENGTH … #define RX_MSDU_END_INFO10_STBC … #define RX_MSDU_END_INFO10_IPSEC_ESP … #define RX_MSDU_END_INFO10_L3_OFFSET … #define RX_MSDU_END_INFO10_IPSEC_AH … #define RX_MSDU_END_INFO10_L4_OFFSET … #define RX_MSDU_END_INFO11_MSDU_NUMBER … #define RX_MSDU_END_INFO11_DECAP_FORMAT … #define RX_MSDU_END_INFO11_IPV4 … #define RX_MSDU_END_INFO11_IPV6 … #define RX_MSDU_END_INFO11_TCP … #define RX_MSDU_END_INFO11_UDP … #define RX_MSDU_END_INFO11_IP_FRAG … #define RX_MSDU_END_INFO11_TCP_ONLY_ACK … #define RX_MSDU_END_INFO11_DA_IS_BCAST_MCAST … #define RX_MSDU_END_INFO11_SEL_TOEPLITZ_HASH … #define RX_MSDU_END_INFO11_IP_FIXED_HDR_VALID … #define RX_MSDU_END_INFO11_IP_EXTN_HDR_VALID … #define RX_MSDU_END_INFO11_IP_TCP_UDP_HDR_VALID … #define RX_MSDU_END_INFO11_MESH_CTRL_PRESENT … #define RX_MSDU_END_INFO11_LDPC … #define RX_MSDU_END_INFO11_IP4_IP6_NXT_HDR … #define RX_MSDU_END_INFO12_USER_RSSI … #define RX_MSDU_END_INFO12_PKT_TYPE … #define RX_MSDU_END_INFO12_SGI … #define RX_MSDU_END_INFO12_RATE_MCS … #define RX_MSDU_END_INFO12_RECV_BW … #define RX_MSDU_END_INFO12_RECEPTION_TYPE … #define RX_MSDU_END_QCN9274_INFO12_MIMO_SS_BITMAP … #define RX_MSDU_END_QCN9274_INFO12_MIMO_DONE_COPY … #define RX_MSDU_END_INFO13_FIRST_MPDU … #define RX_MSDU_END_INFO13_MCAST_BCAST … #define RX_MSDU_END_INFO13_AST_IDX_NOT_FOUND … #define RX_MSDU_END_INFO13_AST_IDX_TIMEDOUT … #define RX_MSDU_END_INFO13_POWER_MGMT … #define RX_MSDU_END_INFO13_NON_QOS … #define RX_MSDU_END_INFO13_NULL_DATA … #define RX_MSDU_END_INFO13_MGMT_TYPE … #define RX_MSDU_END_INFO13_CTRL_TYPE … #define RX_MSDU_END_INFO13_MORE_DATA … #define RX_MSDU_END_INFO13_EOSP … #define RX_MSDU_END_INFO13_A_MSDU_ERROR … #define RX_MSDU_END_INFO13_ORDER … #define RX_MSDU_END_INFO13_OVERFLOW_ERR … #define RX_MSDU_END_INFO13_MSDU_LEN_ERR … #define RX_MSDU_END_INFO13_TCP_UDP_CKSUM_FAIL … #define RX_MSDU_END_INFO13_IP_CKSUM_FAIL … #define RX_MSDU_END_INFO13_SA_IDX_INVALID … #define RX_MSDU_END_INFO13_DA_IDX_INVALID … #define RX_MSDU_END_INFO13_AMSDU_ADDR_MISMATCH … #define RX_MSDU_END_INFO13_RX_IN_TX_DECRYPT_BYP … #define RX_MSDU_END_INFO13_ENCRYPT_REQUIRED … #define RX_MSDU_END_INFO13_DIRECTED … #define RX_MSDU_END_INFO13_BUFFER_FRAGMENT … #define RX_MSDU_END_INFO13_MPDU_LEN_ERR … #define RX_MSDU_END_INFO13_TKIP_MIC_ERR … #define RX_MSDU_END_INFO13_DECRYPT_ERR … #define RX_MSDU_END_INFO13_UNDECRYPT_FRAME_ERR … #define RX_MSDU_END_INFO13_FCS_ERR … #define RX_MSDU_END_QCN9274_INFO13_WIFI_PARSER_ERR … #define RX_MSDU_END_INFO14_DECRYPT_STATUS_CODE … #define RX_MSDU_END_INFO14_RX_BITMAP_NOT_UPDED … #define RX_MSDU_END_INFO14_MSDU_DONE … struct rx_msdu_end_qcn9274 { … } __packed; #define QCN9274_MSDU_END_SELECT_MSDU_END_TAG … #define QCN9274_MSDU_END_SELECT_INFO0_PHY_PPDUID_IP_HDR_CSUM_INFO1 … #define QCN9274_MSDU_END_SELECT_INFO2_CUMULATIVE_CSUM_RULE_IND_0 … #define QCN9274_MSDU_END_SELECT_IPV6_OP_CRC_INFO3_TYPE13 … #define QCN9274_MSDU_END_SELECT_RULE_IND_1_TCP_SEQ_NUM … #define QCN9274_MSDU_END_SELECT_TCP_ACK_NUM_INFO4_WINDOW_SIZE … #define QCN9274_MSDU_END_SELECT_SA_SW_PER_ID_INFO5_SA_DA_ID … #define QCN9274_MSDU_END_SELECT_INFO6_FSE_METADATA … #define QCN9274_MSDU_END_SELECT_CCE_MDATA_TCP_UDP_CSUM_INFO7_IP_LEN … #define QCN9274_MSDU_END_SELECT_INFO8_INFO9 … #define QCN9274_MSDU_END_SELECT_INFO10_INFO11 … #define QCN9274_MSDU_END_SELECT_VLAN_CTAG_STAG_CI_PEER_MDATA … #define QCN9274_MSDU_END_SELECT_INFO12_AND_FLOW_ID_TOEPLITZ … #define QCN9274_MSDU_END_SELECT_PPDU_START_TS_63_32_PHY_MDATA … #define QCN9274_MSDU_END_SELECT_PPDU_START_TS_31_0_TOEPLITZ_HASH_2_4 … #define QCN9274_MSDU_END_SELECT_RES0_SA_47_0 … #define QCN9274_MSDU_END_SELECT_INFO13_INFO14 … #define QCN9274_MSDU_END_WMASK … /* The below rx_msdu_end_qcn9274_compact structure is tied with the mask value * QCN9274_MSDU_END_WMASK. If the mask value changes the structure will also * change. */ struct rx_msdu_end_qcn9274_compact { … } __packed; /* These macro definitions are only used for WCN7850 */ #define RX_MSDU_END_WCN7850_INFO2_KEY_ID … #define RX_MSDU_END_WCN7850_INFO5_MSDU_LIMIT_ERR … #define RX_MSDU_END_WCN7850_INFO5_IDX_TIMEOUT … #define RX_MSDU_END_WCN7850_INFO5_IDX_INVALID … #define RX_MSDU_END_WCN7850_INFO5_WIFI_PARSE_ERR … #define RX_MSDU_END_WCN7850_INFO5_AMSDU_PARSER_ERR … #define RX_MSDU_END_WCN7850_INFO5_TCPUDP_CSUM_FAIL_CPY … #define RX_MSDU_END_WCN7850_INFO12_MIMO_SS_BITMAP … #define RX_MSDU_END_WCN7850_INFO13_FRAGMENT_FLAG … #define RX_MSDU_END_WCN7850_INFO13_CCE_MATCH … struct rx_msdu_end_wcn7850 { … } __packed; /* rx_msdu_end * * rxpcu_mpdu_filter_in_category * Field indicates what the reason was that this mpdu frame * was allowed to come into the receive path by rxpcu. Values * are defined in enum %RX_DESC_RXPCU_FILTER_*. * * sw_frame_group_id * SW processes frames based on certain classifications. Values * are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*. * * phy_ppdu_id * A ppdu counter value that PHY increments for every PPDU * received. The counter value wraps around. * * ip_hdr_cksum * This can include the IP header checksum or the pseudo * header checksum used by TCP/UDP checksum. * * reported_mpdu_length * MPDU length before decapsulation. Only valid when first_msdu is * set. This field is taken directly from the length field of the * A-MPDU delimiter or the preamble length field for non-A-MPDU * frames. * * cce_super_rule * Indicates the super filter rule. * * cce_classify_not_done_truncate * Classification failed due to truncated frame. * * cce_classify_not_done_cce_dis * Classification failed due to CCE global disable * * cumulative_l3_checksum * FISA: IP header checksum including the total MSDU length * that is part of this flow aggregated so far, reported if * 'RXOLE_R0_FISA_CTRL. CHKSUM_CUM_IP_LEN_EN' is set * * rule_indication * Bitmap indicating which of rules have matched. * * ipv6_options_crc * 32 bit CRC computed out of IP v6 extension headers. * * da_offset * Offset into MSDU buffer for DA. * * sa_offset * Offset into MSDU buffer for SA. * * da_offset_valid * da_offset field is valid. This will be set to 0 in case * of a dynamic A-MSDU when DA is compressed. * * sa_offset_valid * sa_offset field is valid. This will be set to 0 in case * of a dynamic A-MSDU when SA is compressed. * * l3_type * The 16-bit type value indicating the type of L3 later * extracted from LLC/SNAP, set to zero if SNAP is not * available. * * tcp_seq_number * TCP sequence number. * * tcp_ack_number * TCP acknowledge number. * * tcp_flag * TCP flags {NS, CWR, ECE, URG, ACK, PSH, RST, SYN, FIN}. * * lro_eligible * Computed out of TCP and IP fields to indicate that this * MSDU is eligible for LRO. * * window_size * TCP receive window size. * * sa_sw_peer_id * sw_peer_id from the address search entry corresponding to the * source address of the MSDU. * * sa_idx_timeout * Indicates an unsuccessful MAC source address search due to the * expiring of the search timer. * * da_idx_timeout * Indicates an unsuccessful MAC destination address search due to * the expiring of the search timer. * * to_ds * Set if the to DS bit is set in the frame control. * * tid * TID field in the QoS control field * * sa_is_valid * Indicates that OLE found a valid SA entry. * * da_is_valid * Indicates that OLE found a valid DA entry. * * da_is_mcbc * Field Only valid if da_is_valid is set. Indicates the DA address * was a Multicast of Broadcast address. * * l3_header_padding * Number of bytes padded to make sure that the L3 header will * always start of a Dword boundary. * * first_msdu * Indicates the first MSDU of A-MSDU. If both first_msdu and * last_msdu are set in the MSDU then this is a non-aggregated MSDU * frame: normal MPDU. Interior MSDU in an A-MSDU shall have both * first_mpdu and last_mpdu bits set to 0. * * last_msdu * Indicates the last MSDU of the A-MSDU. MPDU end status is only * valid when last_msdu is set. * * fr_ds * Set if the from DS bit is set in the frame control. * * ip_chksum_fail_copy * Indicates that the computed checksum did not match the * checksum in the IP header. * * sa_idx * The offset in the address table which matches the MAC source * address. * * da_idx_or_sw_peer_id * Based on a register configuration in RXOLE, this field will * contain: * The offset in the address table which matches the MAC destination * address * OR: * sw_peer_id from the address search entry corresponding to * the destination address of the MSDU * * msdu_drop * REO shall drop this MSDU and not forward it to any other ring. * * The id of the reo exit ring where the msdu frame shall push * after (MPDU level) reordering has finished. Values are defined * in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_. * * flow_idx * Flow table index. * * use_ppe * Indicates to RXDMA to ignore the REO_destination_indication * and use a programmed value corresponding to the REO2PPE * ring * * mesh_sta * When set, this is a Mesh (11s) STA. * * vlan_ctag_stripped * Set by RXOLE if it stripped 4-bytes of C-VLAN Tag from the * packet * * vlan_stag_stripped * Set by RXOLE if it stripped 4-bytes of S-VLAN Tag from the * packet * * fragment_flag * Indicates that this is an 802.11 fragment frame. This is * set when either the more_frag bit is set in the frame control * or the fragment number is not zero. Only set when first_msdu * is set. * * fse_metadata * FSE related meta data. * * cce_metadata * CCE related meta data. * * tcp_udp_chksum * The value of the computed TCP/UDP checksum. A mode bit * selects whether this checksum is the full checksum or the * partial checksum which does not include the pseudo header. * * aggregation_count * Number of MSDU's aggregated so far * * flow_aggregation_continuation * To indicate that this MSDU can be aggregated with * the previous packet with the same flow id * * fisa_timeout * To indicate that the aggregation has restarted for * this flow due to timeout * * tcp_udp_chksum_fail * Indicates that the computed checksum (tcp_udp_chksum) did * not match the checksum in the TCP/UDP header. * * msdu_limit_error * Indicates that the MSDU threshold was exceeded and thus all the * rest of the MSDUs will not be scattered and will not be * decapsulated but will be DMA'ed in RAW format as a single MSDU. * * flow_idx_timeout * Indicates an unsuccessful flow search due to the expiring of * the search timer. * * flow_idx_invalid * flow id is not valid. * * cce_match * Indicates that this status has a corresponding MSDU that * requires FW processing. The OLE will have classification * ring mask registers which will indicate the ring(s) for * packets and descriptors which need FW attention. * * amsdu_parser_error * A-MSDU could not be properly de-agregated. * * cumulative_ip_length * Total MSDU length that is part of this flow aggregated * so far * * key_id * The key ID octet from the IV. Only valid when first_msdu is set. * * service_code * Opaque service code between PPE and Wi-Fi * * priority_valid * This field gets passed on by REO to PPE in the EDMA descriptor * * intra_bss * This packet needs intra-BSS routing by SW as the 'vdev_id' * for the destination is the same as 'vdev_id' (from 'RX_MPDU_PCU_START') * that this MSDU was got in. * * dest_chip_id * If intra_bss is set, copied by RXOLE from 'ADDR_SEARCH_ENTRY' * to support intra-BSS routing with multi-chip multi-link * operation. This indicates into which chip's TCL the packet should be * queueued * * multicast_echo * If set, this packet is a multicast echo, i.e. the DA is * multicast and Rx OLE SA search with mcast_echo_check = 1 * passed. RXDMA should release such packets to WBM. * * wds_learning_event * If set, this packet has an SA search failure with WDS learning * enabled for the peer. RXOLE should route this TLV to the * RXDMA0 status ring to notify FW. * * wds_roaming_event * If set, this packet's SA 'Sw_peer_id' mismatches the 'Sw_peer_id' * of the peer through which the packet was got, indicating * the SA node has roamed. RXOLE should route this TLV to * the RXDMA0 status ring to notify FW. * * wds_keep_alive_event * If set, the AST timestamp for this packet's SA is older * than the current timestamp by more than a threshold programmed * in RXOLE. RXOLE should route this TLV to the RXDMA0 status * ring to notify FW to keep the AST entry for the SA alive. * * msdu_length * MSDU length in bytes after decapsulation. * This field is still valid for MPDU frames without A-MSDU. * It still represents MSDU length after decapsulation * * stbc * When set, use STBC transmission rates. * * ipsec_esp * Set if IPv4/v6 packet is using IPsec ESP. * * l3_offset * Depending upon mode bit, this field either indicates the * L3 offset in bytes from the start of the RX_HEADER or the IP * offset in bytes from the start of the packet after * decapsulation. The latter is only valid if ipv4_proto or * ipv6_proto is set. * * ipsec_ah * Set if IPv4/v6 packet is using IPsec AH * * l4_offset * Depending upon mode bit, this field either indicates the * L4 offset in bytes from the start of RX_HEADER (only valid * if either ipv4_proto or ipv6_proto is set to 1) or indicates * the offset in bytes to the start of TCP or UDP header from * the start of the IP header after decapsulation (Only valid if * tcp_proto or udp_proto is set). The value 0 indicates that * the offset is longer than 127 bytes. * * msdu_number * Indicates the MSDU number within a MPDU. This value is * reset to zero at the start of each MPDU. If the number of * MSDU exceeds 255 this number will wrap using modulo 256. * * decap_type * Indicates the format after decapsulation. Values are defined in * enum %MPDU_START_DECAP_TYPE_*. * * ipv4_proto * Set if L2 layer indicates IPv4 protocol. * * ipv6_proto * Set if L2 layer indicates IPv6 protocol. * * tcp_proto * Set if the ipv4_proto or ipv6_proto are set and the IP protocol * indicates TCP. * * udp_proto * Set if the ipv4_proto or ipv6_proto are set and the IP protocol * indicates UDP. * * ip_frag * Indicates that either the IP More frag bit is set or IP frag * number is non-zero. If set indicates that this is a fragmented * IP packet. * * tcp_only_ack * Set if only the TCP Ack bit is set in the TCP flags and if * the TCP payload is 0. * * da_is_bcast_mcast * The destination address is broadcast or multicast. * * toeplitz_hash * Actual chosen Hash. * 0 - Toeplitz hash of 2-tuple (IP source address, IP * destination address) * 1 - Toeplitz hash of 4-tuple (IP source address, * IP destination address, L4 (TCP/UDP) source port, * L4 (TCP/UDP) destination port) * 2 - Toeplitz of flow_id * 3 - Zero is used * * ip_fixed_header_valid * Fixed 20-byte IPv4 header or 40-byte IPv6 header parsed * fully within first 256 bytes of the packet * * ip_extn_header_valid * IPv6/IPv6 header, including IPv4 options and * recognizable extension headers parsed fully within first 256 * bytes of the packet * * tcp_udp_header_valid * Fixed 20-byte TCP (excluding TCP options) or 8-byte UDP * header parsed fully within first 256 bytes of the packet * * mesh_control_present * When set, this MSDU includes the 'Mesh Control' field * * ldpc * * ip4_protocol_ip6_next_header * For IPv4, this is the 8 bit protocol field set). For IPv6 this * is the 8 bit next_header field. * * * vlan_ctag_ci * 2 bytes of C-VLAN Tag Control Information from WHO_L2_LLC * * vlan_stag_ci * 2 bytes of S-VLAN Tag Control Information from WHO_L2_LLC * in case of double VLAN * * peer_meta_data * Meta data that SW has programmed in the Peer table entry * of the transmitting STA. * * user_rssi * RSSI for this user * * pkt_type * Values are defined in enum %RX_MSDU_START_PKT_TYPE_*. * * sgi * Field only valid when pkt type is HT, VHT or HE. Values are * defined in enum %RX_MSDU_START_SGI_*. * * rate_mcs * MCS Rate used. * * receive_bandwidth * Full receive Bandwidth. Values are defined in enum * %RX_MSDU_START_RECV_*. * * reception_type * Indicates what type of reception this is and defined in enum * %RX_MSDU_START_RECEPTION_TYPE_*. * * mimo_ss_bitmap * Field only valid when * Reception_type is RX_MSDU_START_RECEPTION_TYPE_DL_MU_MIMO or * RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA_MIMO. * * Bitmap, with each bit indicating if the related spatial * stream is used for this STA * * LSB related to SS 0 * * 0 - spatial stream not used for this reception * 1 - spatial stream used for this reception * * msdu_done_copy * If set indicates that the RX packet data, RX header data, * RX PPDU start descriptor, RX MPDU start/end descriptor, * RX MSDU start/end descriptors and RX Attention descriptor * are all valid. This bit is in the last 64-bit of the descriptor * expected to be subscribed in future hardware. * * flow_id_toeplitz * Toeplitz hash of 5-tuple * {IP source address, IP destination address, IP source port, IP * destination port, L4 protocol} in case of non-IPSec. * * In case of IPSec - Toeplitz hash of 4-tuple * {IP source address, IP destination address, SPI, L4 protocol} * * The relevant Toeplitz key registers are provided in RxOLE's * instance of common parser module. These registers are separate * from the Toeplitz keys used by ASE/FSE modules inside RxOLE. * The actual value will be passed on from common parser module * to RxOLE in one of the WHO_* TLVs. * * ppdu_start_timestamp * Timestamp that indicates when the PPDU that contained this MPDU * started on the medium. * * phy_meta_data * SW programmed Meta data provided by the PHY. Can be used for SW * to indicate the channel the device is on. * * toeplitz_hash_2_or_4 * Controlled by multiple RxOLE registers for TCP/UDP over * IPv4/IPv6 - Either, Toeplitz hash computed over 2-tuple * IPv4 or IPv6 src/dest addresses is reported; or, Toeplitz * hash computed over 4-tuple IPv4 or IPv6 src/dest addresses * and src/dest ports is reported. The Flow_id_toeplitz hash * can also be reported here. Usually the hash reported here * is the one used for hash-based REO routing (see use_flow_id_toeplitz_clfy * in 'RXPT_CLASSIFY_INFO'). * * sa * Source MAC address * * first_mpdu * Indicates the first MSDU of the PPDU. If both first_mpdu * and last_mpdu are set in the MSDU then this is a not an * A-MPDU frame but a stand alone MPDU. Interior MPDU in an * A-MPDU shall have both first_mpdu and last_mpdu bits set to * 0. The PPDU start status will only be valid when this bit * is set. * * mcast_bcast * Multicast / broadcast indicator. Only set when the MAC * address 1 bit 0 is set indicating mcast/bcast and the BSSID * matches one of the 4 BSSID registers. Only set when * first_msdu is set. * * ast_index_not_found * Only valid when first_msdu is set. Indicates no AST matching * entries within the max search count. * * ast_index_timeout * Only valid when first_msdu is set. Indicates an unsuccessful * search in the address search table due to timeout. * * power_mgmt * Power management bit set in the 802.11 header. Only set * when first_msdu is set. * * non_qos * Set if packet is not a non-QoS data frame. Only set when * first_msdu is set. * * null_data * Set if frame type indicates either null data or QoS null * data format. Only set when first_msdu is set. * * mgmt_type * Set if packet is a management packet. Only set when * first_msdu is set. * * ctrl_type * Set if packet is a control packet. Only set when first_msdu * is set. * * more_data * Set if more bit in frame control is set. Only set when * first_msdu is set. * * eosp * Set if the EOSP (end of service period) bit in the QoS * control field is set. Only set when first_msdu is set. * * a_msdu_error * Set if number of MSDUs in A-MSDU is above a threshold or if the * size of the MSDU is invalid. This receive buffer will contain * all of the remainder of MSDUs in this MPDU w/o decapsulation. * * order * Set if the order bit in the frame control is set. Only * set when first_msdu is set. * * wifi_parser_error * Indicates that the WiFi frame has one of the following errors * * overflow_err * RXPCU Receive FIFO ran out of space to receive the full MPDU. * Therefore this MPDU is terminated early and is thus corrupted. * * This MPDU will not be ACKed. * * RXPCU might still be able to correctly receive the following * MPDUs in the PPDU if enough fifo space became available in time. * * mpdu_length_err * Set by RXPCU if the expected MPDU length does not correspond * with the actually received number of bytes in the MPDU. * * tcp_udp_chksum_fail * Indicates that the computed checksum (tcp_udp_chksum) did * not match the checksum in the TCP/UDP header. * * ip_chksum_fail * Indicates that the computed checksum did not match the * checksum in the IP header. * * sa_idx_invalid * Indicates no matching entry was found in the address search * table for the source MAC address. * * da_idx_invalid * Indicates no matching entry was found in the address search * table for the destination MAC address. * * amsdu_addr_mismatch * Indicates that an A-MSDU with 'from DS = 0' had an SA mismatching * TA or an A-MDU with 'to DS = 0' had a DA mismatching RA * * rx_in_tx_decrypt_byp * Indicates that RX packet is not decrypted as Crypto is busy * with TX packet processing. * * encrypt_required * Indicates that this data type frame is not encrypted even if * the policy for this MPDU requires encryption as indicated in * the peer table key type. * * directed * MPDU is a directed packet which means that the RA matched * our STA addresses. In proxySTA it means that the TA matched * an entry in our address search table with the corresponding * 'no_ack' bit is the address search entry cleared. * * buffer_fragment * Indicates that at least one of the rx buffers has been * fragmented. If set the FW should look at the rx_frag_info * descriptor described below. * * mpdu_length_err * Indicates that the MPDU was pre-maturely terminated * resulting in a truncated MPDU. Don't trust the MPDU length * field. * * tkip_mic_err * Indicates that the MPDU Michael integrity check failed * * decrypt_err * Indicates that the MPDU decrypt integrity check failed * * fcs_err * Indicates that the MPDU FCS check failed * * flow_idx_timeout * Indicates an unsuccessful flow search due to the expiring of * the search timer. * * flow_idx_invalid * flow id is not valid. * * decrypt_status_code * Field provides insight into the decryption performed. Values * are defined in enum %RX_DESC_DECRYPT_STATUS_CODE_*. * * rx_bitmap_not_updated * Frame is received, but RXPCU could not update the receive bitmap * due to (temporary) fifo constraints. * * msdu_done * If set indicates that the RX packet data, RX header data, RX * PPDU start descriptor, RX MPDU start/end descriptor, RX MSDU * start/end descriptors and RX Attention descriptor are all * valid. This bit must be in the last octet of the * descriptor. * */ struct hal_rx_desc_qcn9274 { … } __packed; struct hal_rx_desc_qcn9274_compact { … } __packed; #define RX_BE_PADDING0_BYTES … #define RX_BE_PADDING1_BYTES … #define HAL_RX_BE_PKT_HDR_TLV_LEN … struct rx_pkt_hdr_tlv { … }; struct hal_rx_desc_wcn7850 { … }; struct hal_rx_desc { … } __packed; #define MAX_USER_POS … #define MAX_MU_GROUP_ID … #define MAX_MU_GROUP_SHOW … #define MAX_MU_GROUP_LENGTH … #define HAL_RX_RU_ALLOC_TYPE_MAX … #define RU_26 … #define RU_52 … #define RU_106 … #define RU_242 … #define RU_484 … #define RU_996 … #endif /* ATH12K_RX_DESC_H */
Codebase Browser
linux